
1 / 3 · Click to enlarge
AI Summary
A pack of 40 male to female jumper wires, each 10cm long with 2.54mm pin spacing, for solderless breadboard and header connections. The ribbon peels apart so you can take exactly the number of wires a project needs and reuse them again and again.
Key Highlights
- 40 male to female jumper wires in one pack
- 10cm length keeps breadboard layouts tidy
- 2.54mm pitch fits standard 1P-1P headers
- Ribbon design separates into single wires
- Plugs in and pulls out for repeat use
- Colour-coded wires simplify tracing signals
Ideal For
- Makers prototyping circuits on a breadboard
- Students learning electronics and microcontroller basics
- Arduino, Raspberry Pi and other development board users
- Technicians making quick test connections on PCBs
- Hobbyists building sensor and module projects
Buying Tip
Check that your board and target use 2.54mm pin spacing before ordering, since these 10cm wires are sized for standard headers rather than finer-pitch connectors.
Elecvora expert review
Our verdict
A straightforward, good-value pack of 40 male to female jumpers that covers the most common breadboard and header connections. The separable ribbon and 10cm length make it a practical staple for any prototyping drawer.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 40 wires give plenty of spare connections
- Male to female ends suit header-to-breadboard links
- Separable ribbon adapts to any project size
- Reusable and easy to plug and unplug
- Compact 10cm length keeps builds tidy
Cons
- Unbranded, so no brand support or documentation
- 10cm may be too short for larger layouts
- Not intended for permanent or high-current wiring
Best for
Breadboard and header prototyping with development boards
Not ideal for
Permanent installations or long cable runs
Specifications
| Cable Type | Male to Female |
|---|---|
| Length (mm) | 100 |
| Weight (g) | 25 |
| Compatible Pin Header | 1P-1P |
| DuPont Line | 40P |
| Header Pin Width (mm) | 2.54 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 11 × 5 × 1 cm |
What's in the box
- 40 x Male to Female Jumper Wires, 10cm, 2.54mm pitch
Frequently Asked Questions
What are male to female jumper wires used for?
Will these fit my Arduino or Raspberry Pi?
Do I need to solder anything?
Can I separate the wires?
How many wires are included and how long are they?
How should I store and care for them?
Overview
These 40 male to female jumper wires give you a quick, solderless way to connect components during prototyping. Each wire measures 10cm and carries a male pin at one end and a female socket at the other, so a board with male headers can be linked straight to a breadboard, a sensor module or a test circuit. The 2.54mm pin spacing matches common 1P-1P headers, which covers a very wide range of development boards and prototyping hardware.
The wires are supplied as a ribbon that can be peeled apart, letting you take just the number of connections a build requires and keep the rest together for later. Because the connectors push in and pull out, nothing is soldered and the same set can be used across many projects.
Key Features
- Male to female ends: a pin on one side and a socket on the other, ideal for joining a header to a breadboard.
- 40 wires per pack: enough for multi-signal wiring without running short mid-build.
- 10cm length: short runs that keep a breadboard layout neat and easy to read.
- 2.54mm pitch: fits standard 1P-1P pin headers and breadboard slots.
- Separable ribbon: tear off single wires or keep groups together.
- Reusable: plug and unplug repeatedly for iterative prototyping.
Specifications Explained
Cable type: male to female means each wire has a protruding pin at one end and a receiving socket at the other. That makes it the natural choice when one side of the connection is a male header and the other is a breadboard or female socket.
Length: at 100mm, the wires suit compact builds where long leads would create clutter or pick up noise. Pin width: the 2.54mm spacing is the de facto standard for through-hole headers, breadboards and most hobby development boards, so the wires seat firmly without forcing.
DuPont line 40P: the set is arranged as a 40-way ribbon, which keeps the wires organised and lets you split off only what you need. The whole pack weighs about 25g, so it adds almost nothing to a toolkit or shipping parcel.
Compatibility and Requirements
The wires are compatible with 2.54mm spacing pin headers and 1P-1P connections. They are commonly used with Arduino, Raspberry Pi, Orange Pi, Banana Pi and other mini PCs and development boards, as well as PCB projects, PC motherboards and breadboards. No soldering iron is required for basic use; a breadboard or matching header is all you need to start.
Typical Uses
Use them to wire a sensor module to a development board, to patch signals across a breadboard, to extend a header connection on a PCB project, or to make temporary test links on a motherboard or piece of test equipment. Students learning electronics will find them handy for classroom builds, and repair technicians can use them for quick diagnostic connections.
What's in the Box
One pack containing 40 male to female jumper wires, each 10cm long with 2.54mm pitch connectors.
Quick specs
- Cable Type
- Male to Female
- Length (mm)
- 100
- Weight (g)
- 25
- Compatible Pin Header
- 1P-1P
- DuPont Line
- 40P
- Header Pin Width (mm)
- 2.54
















