Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A three-strip Dupont jumper cable combo in 20 cm lengths, with male/male, male/female and female/female ends on 40-pin colour-coded ribbons. The wires tear apart cleanly, so you can pull off just the number you need for a breadboard or header run.

Key Highlights

  • Three 40-wire strips: male/male, male/female and female/female
  • 20 cm cable length suits compact breadboard and header layouts
  • 2.54 mm pitch fits standard single-row pin headers
  • Colour-coded wires simplify tracing during prototyping
  • Each strip can be split to the exact wire count required
  • Reusable plug-and-unplug design, no soldering needed

Ideal For

  • Makers prototyping on breadboards with 2.54 mm headers
  • Students learning circuit wiring without soldering
  • Repair technicians doing quick header tests
  • Developers working with Raspberry Pi, Arduino, Orange Pi or Banana Pi boards
  • Anyone building temporary PCB or motherboard connections

Buying Tip

Confirm your board or header uses 2.54 mm pin spacing, and buy this combo rather than single-gender strips so you always have the right connector on hand.

Elecvora expert review

Our verdict

A sensible consumable for anyone who wires 2.54 mm headers regularly: three genders in one pack covers most breadboard and development board jobs. The 20 cm length and split-table ribbon keep builds tidy without committing you to a fixed wire count.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three gender combinations in one pack
  • Colour-coded and easy to trace
  • Ribbon splits to the exact wire count needed
  • Reusable, no soldering required
  • Compact 20 cm length suits small layouts

Cons

  • Only suits 2.54 mm pitch headers
  • Unbranded, so no brand support or documentation
  • Not intended for permanent or high-current wiring

Best for

Breadboard and development board prototyping with 2.54 mm headers

Not ideal for

Permanent installations or headers with non-standard pitch

Specifications

Cable Length200
Compatible Pin Header1P-1P
DuPont Line40P
Header Pin Width (mm)2.54
Weight (g)35 (each)
Shipping Weight0.06 kg
Shipping Dimensions8 × 6 × 6 cm

What's in the box

  • 1 x 20 cm Dupont jumper cable, 2.54 mm 1P-1P male to male, 40 pieces
  • 1 x 20 cm Dupont jumper cable, 2.54 mm 1P-1P male to female, 40 pieces
  • 1 x 20 cm Dupont jumper cable, 2.54 mm 1P-1P female to female, 40 pieces

Frequently Asked Questions

What exactly is included in this combo?
You get three 40-wire strips at 20 cm: one male/male, one male/female and one female/female, each with 2.54 mm pitch connectors.
Will these fit my development board?
They fit single-row headers with 2.54 mm spacing, which covers boards such as Raspberry Pi, Arduino, Orange Pi and Banana Pi models that use that pitch. Check your board's header spacing first.
Do I need to solder anything?
No. The connectors push onto headers and pull off again, so the cables are reusable for prototyping and testing.
Can I use only part of a strip?
Yes. The wires are held together as a ribbon but separate easily, so you can peel off the number you need and keep the rest joined.
What is the current or voltage rating?
That information is not provided with this product. Use the cables for typical low-power prototyping and signal connections.
How should I store them?
Keep the strips flat and dry, and rejoin or bag any separated wires so the colours stay easy to identify for the next project.

Overview

This is a three-part Dupont jumper cable set built around 40-wire colour-coded ribbons. You get one male/male strip, one male/female strip and one female/female strip, all at 20 cm. Each ribbon uses 2.54 mm pitch connectors, which is the common spacing on single-row pin headers found on breadboards and many development boards.

The ribbon format is the practical part: the wires are held together in order but separate easily, so a 40-way strip can become a 4-way or 12-way run in seconds. That keeps wiring neat when you need a bus and flexible when you need only a few links.

Key Features

  • Complete gender coverage: male/male, male/female and female/female strips in one pack, so you are not caught short mid-build.
  • 20 cm working length: long enough to reach across a breadboard or between stacked boards without excess slack.
  • 2.54 mm pitch: matches standard 1P-1P header spacing.
  • Colour-coded: each wire in the ribbon has its own colour for easier identification.
  • Detachable: tear off the wire count you need and keep the remainder for later jobs.
  • Reusable: plug and unplug repeatedly during prototyping and testing.

Specifications Explained

Cable length of 200 mm is a compact size that keeps signal runs short and tidy on a desk or bench. 40P per strip means each ribbon carries 40 individual wires, giving you plenty of spare links once split. 2.54 mm header pin width is the standard spacing for single-row headers, so the connectors seat on common breadboard and board headers. 1P-1P compatibility refers to single-pin-to-single-pin connection, which is exactly what a jumper wire does. Each strip weighs roughly 35 g, and the packed shipping weight is about 0.06 kg in an 8 x 6 x 6 cm box, so storage and postage are simple.

Compatibility and Requirements

The cables are intended for 2.54 mm spacing pin headers. They work with development boards and mini PCs that use that pitch, including boards in the Raspberry Pi, Arduino, Orange Pi and Banana Pi families, as well as general PCB, motherboard and breadboard connections. No soldering is required: the connectors push onto headers and pull off again. Check that your board or header uses 2.54 mm spacing before ordering.

Typical Uses

  • Breadboard prototyping and temporary test circuits
  • Linking headers between stacked development boards
  • PCB project wiring and repair work
  • Motherboard and header breakout connections
  • Classroom and bench demonstrations where quick rewiring helps

What's in the Box

  • 1 x 20 cm Dupont jumper cable, 2.54 mm 1P-1P male to male, 40 pieces
  • 1 x 20 cm Dupont jumper cable, 2.54 mm 1P-1P male to female, 40 pieces
  • 1 x 20 cm Dupont jumper cable, 2.54 mm 1P-1P female to female, 40 pieces

Quick specs

Cable Length
200
Compatible Pin Header
1P-1P
DuPont Line
40P
Header Pin Width (mm)
2.54
Weight (g)
35 (each)
Shipping Weight
0.06 kg
See all specifications