
1 / 4 · Click to enlarge
AI Summary
A 150mm cable with a JST SH 4-pin female connector on one end and premium male headers on the other, ideal for linking Qwiic/STEMMA QT boards to breadboards. The 1mm pitch connector latches securely yet remains easy to plug and unplug.
Key Highlights
- JST SH 4-pin female to premium male Dupont headers
- 150mm length for neat, short connections
- 1mm pitch compact connector with secure latching feel
- Color-coded wires: red 3.3V, black GND, blue SDA, yellow SCL
- Works with Qwiic and STEMMA QT boards
- Can be soldered directly to header ends if needed
Ideal For
- Makers building I2C sensor prototypes on breadboards
- Students learning electronics with Qwiic/STEMMA QT modules
- Engineers needing quick, solder-free connections
- Anyone using 0.1-inch socket headers with I2C devices
Buying Tip
Confirm that your board uses a Qwiic/STEMMA QT JST SH connector or 0.1-inch male headers, and check the wire color order before applying power.
Elecvora expert review
Our verdict
A well-made adapter cable that removes the hassle of wiring Qwiic sensors to breadboards. The 150mm length and latching connector make it a practical addition to any I2C toolkit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Saves time versus soldering custom cables
- Secure latching JST SH connector
- Premium male headers fit breadboards well
- Color-coded wires simplify identification
Cons
- Only 150mm long, which may be too short for some layouts
- Not intended for high-vibration environments without extra strain relief
Best for
Quick I2C prototyping with Qwiic/STEMMA QT boards
Not ideal for
Long-distance or permanent installations requiring custom lengths
Specifications
| No. of Pins | 4 |
|---|---|
| Connector Type | JST SH 4-pin to Premium Male Headers Cable |
| Cable Length | 115 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 13 × 9 × 1 cm |
What's in the box
- 1 x Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable – 150mm Long
Frequently Asked Questions
What is this cable used for?
Which boards are compatible?
What voltage does it carry?
Can I solder to the header end?
What is included in the package?
How should I care for the cable?
Overview
The Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable is a ready-made link between I2C modules and standard prototyping. One end carries a female JST SH 4-pin connector that mates with Qwiic and STEMMA QT boards, while the other end has premium male Dupont headers that plug into 0.1-inch socket headers or solderless breadboards. At approximately 150mm long, it is well suited to compact builds where longer wires would add clutter.
Key Features
- Dual termination: JST SH female connector on one end, premium male headers on the other.
- Compact 1mm pitch: Smaller than JST-PH (2mm) but still easy to insert and remove with a satisfying latch.
- Color-coded conductors: Red for 3.3VDC power, black for ground, blue for I2C SDA data, and yellow for I2C SCL clock.
- Flexible use: Connect to breadboards, socket headers, or solder directly to the header ends.
- Qwiic/STEMMA QT ready: Designed to work with boards using the Qwiic ecosystem.
Specifications Explained
4 pins: Matches the standard I2C pinout (power, ground, SDA, SCL) used by most Qwiic sensors and drivers. JST SH 4-pin to male headers: The JST SH side provides a secure, keyed connection to Qwiic boards, while the male headers offer universal compatibility with common prototyping tools. 150mm length: Short enough to keep signal runs tidy yet long enough to reach between adjacent boards. 1mm pitch: The fine pitch saves space on crowded boards, and the latching mechanism helps prevent accidental disconnection.
Compatibility and Requirements
This cable is intended for boards and sensors that use the Qwiic or STEMMA QT connector system. It also works with any device that accepts 0.1-inch male headers or a solderless breadboard. No additional connectors are required for standard use. Note that the cable carries four conductors; verify that your target board follows the same color convention before connecting power.
Typical Uses
- Connecting Qwiic sensors to a breadboard-based prototype.
- Linking STEMMA QT breakouts to development boards with socket headers.
- Quick I2C wiring for temporary test setups.
- Soldering directly to the header ends for a permanent installation.
What's in the Box
1 x Adafruit STEMMA QT / Qwiic JST SH 4-pin to Premium Male Headers Cable – 150mm Long.
Quick specs
- No. of Pins
- 4
- Connector Type
- JST SH 4-pin to Premium Male Headers Cable
- Cable Length
- 115
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 13 × 9 × 1 cm



















