Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact I2S DAC breakout with stereo headphone output and a built-in mono class-D speaker amplifier, configured over I2C. It lets small microcontroller projects produce clean digital audio without an external amplifier board.

Key Highlights

  • I2S digital audio input on BCLK, WSEL and DIN, no external MCLK needed
  • Stereo headphone output plus mono class-D speaker amp up to 2.5 W into 4 ohm
  • 95 dB SNR DAC supporting 8 to 192 kHz sample rates
  • I2C configuration for gain control and headphone or speaker selection
  • Microphone bias, headset detection and button press detection on board
  • Libraries available for Arduino, CircuitPython and Python

Ideal For

  • Makers building compact internet radios or streaming audio players
  • Developers adding voice output to microcontroller projects
  • Educators teaching I2S and I2C audio on Arduino or CircuitPython
  • Hobbyists building portable synthesizers and sound gadgets
  • Headset-based intercom and voice input projects

Buying Tip

Decide whether you need speaker output before wiring power, since the board should run from 5 VDC to drive a speaker but can use 3 VDC for headphones only.

Elecvora expert review

Our verdict

A well-rounded audio breakout that combines a clean stereo DAC with a usable speaker amplifier in one small board. It is a sensible pick for makers who want digital audio without extra amplifier hardware, provided they are comfortable with I2C configuration.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Stereo headphone and mono speaker outputs on one board
  • No external master clock needed
  • High 95 dB SNR and wide sample rate support
  • Microphone bias and headset detection included
  • Libraries for Arduino, CircuitPython and Python

Cons

  • Requires I2C configuration before audio playback works
  • Speaker output is mono only
  • Power supply must match the chosen output

Best for

Compact microcontroller audio projects needing both headphone and speaker output

Not ideal for

Projects needing stereo speaker amplification or plug-and-play audio without configuration

Specifications

Item TypeBreakout Board
Model No. / NameTLV320DAC3100
Length (mm)33.7
Width (mm)25.4
Weight (g)04
Shipping Weight0.005 kg
Shipping Dimensions5 × 5 × 2 cm

What's in the box

  • 1 x Adafruit TLV320DAC3100 I2S DAC breakout board
  • 2 x 16-pin connectors

Frequently Asked Questions

Do I need an external master clock?
No. The board derives its internal clock from the I2S BCLK signal using a PLL, so an external MCLK is not required.
What voltage should I use?
Use 3 VDC for headphone-only operation, or 5 VDC when driving a speaker through the built-in class-D amplifier.
Can I connect headphones to the speaker output?
No. The speaker output is for a speaker only, and the headphone output should be used for headphones.
Is the speaker output stereo?
No. The headphone output is stereo, while the class-D speaker amplifier provides a mono output rated up to 2.5 W into 4 ohm.
What is included with the board?
The package contains one Adafruit TLV320DAC3100 breakout board and two 16-pin connectors.
Which libraries can I use?
Libraries are available for Arduino, CircuitPython and Python, and the board is configured over I2C for playback settings.

Overview

The Adafruit TLV320DAC3100 is a breakout board built around a high-quality stereo DAC that accepts digital audio over I2S. Instead of wiring a separate amplifier, you get both a stereo headphone output and a mono class-D speaker amplifier on the same small board, which keeps compact audio projects tidy and simple.

Audio data arrives on the I2S bus using BCLK, WSEL and DIN. No external master clock is required because the chip derives its clock internally from BCLK via a PLL. Gain settings and output routing are handled over I2C, so your microcontroller stays in control of how sound is delivered.

Key Features

  • Dual outputs: AC-coupled stereo headphone output and a mono speaker output through a built-in class-D amplifier, rated up to 2.5 W into 4 ohm.
  • Clean conversion: 95 dB SNR DAC with support for sample rates from 8 kHz to 192 kHz.
  • Flexible digital interface: I2S input with no external MCLK, plus support for DSP and TDM modes.
  • I2C control: Configure gain, output selection and other options from your host board.
  • Headset support: MIC and BIAS connections for a headset microphone, with plug-in and button-press detection.
  • Extra inputs and control: AIN1 and AIN2 analog mix-in inputs and one GPIO pin usable as an IRQ line.

Specifications Explained

The 95 dB signal-to-noise ratio indicates how quietly the DAC performs between audible passages, which matters for music playback and voice output. The 8 to 192 kHz sample rate range covers standard audio rates as well as higher-resolution material, so the board suits both simple alerts and fuller audio playback.

The class-D amplifier is intended for a speaker only, not headphones, and reaches up to 2.5 W into a 4 ohm load. The headphone path is AC-coupled and separate, so you can use headphones or a speaker depending on your project. Power requirements differ by output: the board can run from 3 VDC for headphone-only use, or 5 VDC when driving a speaker.

The board measures 33.7 mm by 25.4 mm and weighs about 4 g, making it easy to fit into small enclosures. Configuration over I2C is required for playback, and the chip includes 25 digital audio blocks with filters, DRC, 3D effects and a tone generator, plus a power-down mode.

Compatibility and Requirements

You need a host microcontroller with I2S output on BCLK, WSEL and DIN, plus an I2C bus for configuration. Libraries are available for Arduino, CircuitPython and Python. Plan your power supply around the output you intend to use: 3 VDC for headphones only, or 5 VDC when driving a speaker. A speaker must be connected to the speaker output, never headphones.

Typical Uses

This breakout suits internet radios, voice assistants, portable music players, small synthesizers, sound-effect props and any microcontroller project that needs decent audio without a separate amplifier board. The headset microphone input and detection features also make it useful for headset-based intercom or voice projects.

What's in the Box

  • 1 x Adafruit TLV320DAC3100 I2S DAC breakout board
  • 2 x 16-pin connectors

Quick specs

Item Type
Breakout Board
Model No. / Name
TLV320DAC3100
Length (mm)
33.7
Width (mm)
25.4
Weight (g)
04
Shipping Weight
0.005 kg
See all specifications