
1 / 2 · Click to enlarge
At a glance
Made by Adafruit, this temperature and humidity sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Temperature and humidity sensor; model no. / name USB Temperature and Humidity Sensor; rated voltage (vdc) 3.3V to 5V. Check that your power source supplies 3.3V to 5V before connecting it.
Key Highlights
- Item Type: Temperature and humidity sensor
- Model No. / Name: USB Temperature and Humidity Sensor
- Rated Voltage (VDC): 3.3V to 5V
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Temperature and humidity sensor |
|---|---|
| Model No. / Name | USB Temperature and Humidity Sensor |
| Rated Voltage (VDC) | 3.3V to 5V |
| Operating Range | 0 to 100 %RH, -40 to 125 °C |
| Processor | ATSAMD21E18, 32-bit Cortex M0+ at 48 MHz |
| Memory Capacity | 256KB Flash, 32KB RAM |
| Current consumption | 0.4 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 4 × 4 × 2 cm |
Overview
The Adafruit SHT45 Trinkey - USB Temperature and Humidity Sensor with PTFE, made by Adafruit, is listed in our temperature and humidity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Temperature and humidity sensor
- Model No. / Name: USB Temperature and Humidity Sensor
- Rated Voltage (VDC): 3.3V to 5V (match this to your power supply; too high a voltage can damage the part)
- Operating Range: 0 to 100 %RH, -40 to 125 °C (quoted range is usually line-of-sight; walls and interference shorten it)
- Processor: ATSAMD21E18, 32-bit Cortex M0+ at 48 MHz (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Memory Capacity: 256KB Flash, 32KB RAM (more memory leaves room for larger programs and buffers)
- Current consumption: 0.4 (your supply must deliver at least this much current)
- Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- ATSAMD21E18 32-bit Cortex M0+ - 48 MHz 32-bit processor with 256KB Flash and 32 KB RAM
- Native USB CDC ACM supported by every OS (Mac OS X, Windows 7~11, Linux) - can be used in Arduino or CircuitPython as a USB serial console, MIDI,
- Keyboard/Mouse HID, and even a little disk drive for storing Python scripts.
- Can be used with Arduino IDE or CircuitPython
- One RGB NeoPixel LED
- One Capacitive Touchpad
- SHT45 Temperature + Humidity sensor with thermal-isolation cutout
- Reset switch to start your project code over or enter bootloader mode
- Slim and cute, keychain-friendly
- Fully functional in condensing environment
- Power heater, true NIST-traceability
- JEDEC JESD47 qualification
- Sensor-specific calibration certificate acc. to ISO 17025 : 2017, 3-point temp. calibration
- Current Consumption: Average current: 0.4 µA, Idle current: 80 nA (excluding on-board regulator)
Package Includes:
1 x Adafruit SHT45 Trinkey - USB Temp and Humidity SensorQuick specs
- Item Type
- Temperature and humidity sensor
- Model No. / Name
- USB Temperature and Humidity Sensor
- Rated Voltage (VDC)
- 3.3V to 5V
- Operating Range
- 0 to 100 %RH, -40 to 125 °C
- Processor
- ATSAMD21E18, 32-bit Cortex M0+ at 48 MHz
- Memory Capacity
- 256KB Flash, 32KB RAM



















