Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An all-in-one I2S digital audio amplifier breakout that decodes digital audio and drives a mono speaker directly with up to 3W of Class D output. It saves space by combining DAC and amplifier on one tiny board with five selectable gain settings.

Key Highlights

  • Combines I2S DAC and Class D amplifier on one compact breakout
  • Delivers up to 3W into a 4-ohm speaker from a 2.7V-5.5V supply
  • Five pin-selectable gain settings from 3dB to 15dB
  • Supports I2S sample rates from 8kHz to 96kHz
  • Accepts 3.3V or 5V logic data for flexible integration
  • Bridge-tied outputs drive speakers directly with no ground connection

Ideal For

  • Raspberry Pi users adding compact amplified audio
  • Makers building portable or battery-powered sound projects
  • Arduino Zero and I2S microcontroller developers
  • Designers of small speaker installations with limited space
  • Educators teaching digital audio and I2S basics

Buying Tip

Confirm your board or microcontroller exposes I2S audio pins and that you have a 4-ohm speaker ready, since this module drives speakers directly and cannot feed another amplifier.

Elecvora expert review

Our verdict

A tidy, space-saving solution for anyone who needs digital I2S audio turned into speaker-level sound without adding a separate DAC and amplifier. Its selectable gain and wide supply range make it adaptable, though it is a mono amplifier intended for direct speaker drive only.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Combines DAC and amplifier on one small board
  • Five selectable gain settings
  • Wide 2.7V-5.5V supply range
  • Efficient Class D design with thermal and over-current protection

Cons

  • Mono output only
  • Cannot be connected to another amplifier
  • Requires soldering and a separate speaker

Best for

Compact I2S audio projects on Raspberry Pi and compatible microcontrollers

Not ideal for

Stereo systems or setups that need line-level output to another amplifier

Specifications

Output Power (W)3
PSRR/Ripple Rejection77 dB typ @ 1KHz
GainFive pin-selectable 3dB, 6dB, 9dB, 12dB, 15dB
Sampling RateI2S 8kHz to 96kHz
Dimensions (L x W x H) mm19.4 x 17.8 x 3.0
Weight (g)1.2
Shipping Weight0.01 kg
Shipping Dimensions4 × 4 × 1 cm

Frequently Asked Questions

What is the difference between I2S and I2C?
I2S is a digital audio protocol used to pass sound data between chips, while I2C is a general-purpose communication bus. This board uses I2S audio input, not I2C.
Can I connect the output to another amplifier?
No. The outputs are bridge-tied and produce a high-frequency PWM signal meant to drive a speaker directly, so they should not feed another amplifier.
What supply voltage does the board need?
It runs from 2.7V to 5.5V DC and accepts 3.3V or 5V logic data on the I2S input.
What is the default gain setting?
The board defaults to 9dB of gain. The Gain pin can be configured with a pull-up or pull-down resistor to select 3dB, 6dB, 9dB, 12dB or 15dB.
What speaker should I use?
The module is rated to deliver up to 3W into a 4-ohm speaker. Connect the speaker directly to the bridge-tied outputs.
How does the ShutDown/Mode pin work?
It can place the chip in shutdown or select which I2S channel reaches the speaker. By default the output is a (L+R)/2 stereo mix in mono; adding a resistor allows left-only or right-only output.

Overview

The Adafruit MAX98357A breakout is a small, self-contained audio module that takes standard I2S digital audio in and turns it into amplified mono sound for a speaker. Instead of pairing a separate DAC with an amplifier, this board handles both jobs in one place, which keeps wiring simple and saves room in compact builds.

At just 19.4 x 17.8 x 3.0 mm and 1.2 g, it fits easily into portable and battery-powered projects. The Class D design is efficient, and the chip includes built-in thermal and over-current protection.

Key Features

  • Integrated DAC and amplifier: one board converts I2S audio and amplifies it directly.
  • 3W Class D output: drives a 4-ohm speaker with up to 3W.
  • Wide supply range: operates from 2.7V to 5.5V DC.
  • Flexible gain: the Gain pin selects 3dB, 6dB, 9dB, 12dB or 15dB, with 9dB as the default.
  • Channel control: the ShutDown/Mode pin enables shutdown and selects left, right or mixed output.
  • I2S input: supports sample rates from 8kHz to 96kHz and 3.3V or 5V logic data.

Specifications Explained

The 3W output rating is the headline figure: it tells you the board can drive a small 4-ohm speaker to useful volume in personal projects. The 2.7V-5.5V range means the module can share a supply with common 3.3V and 5V systems.

Gain selection matters when matching the amplifier to your source. The default 9dB setting suits many setups, while lower settings reduce sensitivity and higher settings boost quieter sources. The 8kHz to 96kHz sampling range covers voice playback through to higher-quality audio files.

The 77 dB typical PSRR at 1kHz indicates how well the amplifier rejects supply ripple, which helps keep background noise low. Outputs are bridge-tied, so they connect straight to the speaker terminals and never to ground. The output is a high-frequency PWM square wave that the speaker coil averages out, so the board must drive a speaker directly rather than feed another amplifier.

Compatibility and Requirements

The board works with the Raspberry Pi, Arduino Zero and other microcontrollers or microcomputers that provide I2S audio outputs. It accepts 3.3V or 5V logic data and needs a DC supply between 2.7V and 5.5V. A speaker is required, and because the outputs are bridge-tied, the speaker should be connected directly to the board.

Typical Uses

  • Adding amplified mono sound to Raspberry Pi projects
  • Portable and battery-powered audio builds
  • Voice and sound playback in microcontroller projects
  • Compact speaker installations where space is tight

What's in the Box

Package contents are not specified for this listing. Please check the product packaging for the exact included items.

Quick specs

Output Power (W)
3
PSRR/Ripple Rejection
77 dB typ @ 1KHz
Gain
Five pin-selectable 3dB, 6dB, 9dB, 12dB, 15dB
Sampling Rate
I2S 8kHz to 96kHz
Dimensions (L x W x H) mm
19.4 x 17.8 x 3.0
Weight (g)
1.2
See all specifications