Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Two 70 cm 4-pin female-to-female Dupont cables for linking male headers on 3D printer boards and electronics modules. The 26 AWG wire and 10 mm pin width make them a practical plug-and-play option for testing and prototyping.

Key Highlights

  • Two 70 cm 4-pin female-to-female Dupont cables per set
  • 26 AWG wire suits low-power signal and logic connections
  • 10 mm header pin width for standard 4-pin male headers
  • Female connectors on both ends for bridging two male headers
  • Useful for 3D printer boards, modules and prototyping setups
  • Lightweight at 20 g per cable, easy to route inside enclosures

Ideal For

  • 3D printer owners wiring 4-pin modules to control boards
  • Makers prototyping with Arduino boards and sensor modules
  • Electronics repair technicians running quick circuit tests
  • Hobbyists who prefer reusable jumpers over soldered connections
  • Students building temporary 4-pin header links on a bench

Buying Tip

Measure the pin width of your 4-pin male header and confirm it matches the 10 mm connector before ordering, since these cables only fit matching headers.

Elecvora expert review

Our verdict

A simple, practical pair of 4-pin female-to-female jumpers for anyone who needs a reusable 70 cm link between male headers. They are not a substitute for permanent high-current wiring, but for signal-level prototyping and printer module connections they do the job cleanly.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two cables included, so you have a spare
  • 70 cm length gives useful reach
  • Female-to-female ends bridge two male headers without soldering
  • 26 AWG wire is light and flexible for routing

Cons

  • Only fits 4-pin male headers with a matching 10 mm pin width
  • Not intended for high-current power connections
  • No datasheet or pinout marking on the cable

Best for

Makers and 3D printer users making temporary or modular 4-pin header connections

Not ideal for

Permanent high-power wiring or boards with female headers

Specifications

Wire Size (AWG)26
No. of Pins4
Compatible Pin Header4P-4P
DuPont Line4P
Header Pin Width (mm)10
Weight (g)20
Cable Length70
Shipping Weight0.022 kg
Shipping Dimensions8 × 6 × 3 cm

What's in the box

  • 2 x 70CM 4 Pin Female to Female Dupont Cable

Frequently Asked Questions

What does female-to-female mean on this cable?
Both ends have female sockets, so the cable plugs onto two male headers. It is used to bridge one 4-pin male header to another.
Will this fit my 3D printer board?
It fits if your board has a 4-pin male header with a 10 mm pin width. Check the header on your board before ordering, as other pin widths will not match.
Can I use these cables for power?
They are 26 AWG signal-style jumpers, so they are best suited to low-power logic and signal connections. Avoid using them for high-current power runs.
How many cables are included?
The package contains two 70 cm 4-pin female-to-female Dupont cables.
Do I need to solder anything?
No soldering is needed for the connection itself. The female connectors push onto male header pins, so the link can be removed and reused.
How should I store and care for the cables?
Keep them coiled loosely and avoid sharp bends or pulling on the wire near the connector. Store them away from heat and moisture to protect the insulation.

Overview

This product is a two-piece set of 70 cm 4-pin Dupont jumper cables with female connectors on both ends. Each cable is designed to join two 4-pin male headers, which makes it handy when you want to extend a module connection, rearrange a circuit or run a quick test without soldering. The 26 AWG wire is thin and flexible enough to route around a 3D printer frame or inside a project enclosure.

Key Features

  • Female-to-female 4-pin layout: both ends accept male header pins, so the cable bridges two male connectors directly.
  • 70 cm length: enough reach for many printer frames, control boxes and bench setups while staying manageable.
  • 26 AWG wire: a common gauge for low-power signal and logic wiring in electronics projects.
  • 10 mm header pin width: matches standard 4-pin male header spacing.
  • Two cables included: lets you make two separate 4-pin connections or keep a spare on hand.

Specifications Explained

4 pins, 4P-4P: the cable carries four separate conductors and connects a 4-pin header to another 4-pin header. This is useful for modules that use a 4-wire interface.

26 AWG: the wire is relatively thin, which keeps the cable light and flexible. It is intended for signal-level connections rather than high-current power runs.

70 cm length: gives you roughly arm's-length reach, helpful when a module and its header are not next to each other.

10 mm header pin width: the connector body is sized for common 4-pin male headers, so check your header dimensions before ordering.

Compatibility and Requirements

The cables are designed for 4-pin male headers with a matching 10 mm pin width. They are commonly used with 3D printer boards, Arduino boards and electronics modules that expose a 4-pin header. No soldering is required for the connection itself, but both ends must mate with male pins. Confirm that your board or module uses a 4-pin header before purchase.

Typical Uses

  • Connecting a 4-pin module to a 3D printer control board
  • Temporary wiring during prototyping and circuit testing
  • Extending a 4-pin header connection inside an enclosure
  • Bench diagnostics where a reusable jumper is preferred over solder

What's in the Box

2 x 70 cm 4-pin female-to-female Dupont cables.

Quick specs

Wire Size (AWG)
26
No. of Pins
4
Compatible Pin Header
4P-4P
DuPont Line
4P
Header Pin Width (mm)
10
Weight (g)
20
See all specifications