Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 10-pack of 20cm male-to-female jumper wires with 2.54mm pin spacing. They make solderless breadboard prototyping quick and easy, and can be reused again and again.

Key Highlights

  • 10 male-to-female jumper wires, each 20cm long
  • Standard 2.54mm pitch for breadboard and header compatibility
  • Flexible and detachable for custom wire counts
  • Color-coded for easy signal tracing
  • Reusable design for repeated prototyping
  • Lightweight and compact for easy storage

Ideal For

  • Electronics hobbyists building breadboard prototypes
  • Students learning circuit design with Arduino or Raspberry Pi
  • Engineers testing sensors and modules
  • Makers working on compact projects needing short jumpers
  • Anyone needing reusable, solderless connections

Buying Tip

Check that your project uses 2.54mm pitch headers; these wires are not suitable for smaller or larger pin spacings.

Elecvora expert review

Our verdict

These jumper wires are a straightforward, reliable choice for basic prototyping. They offer good value for the price and are handy to have in any electronics kit, though they are not intended for high-power applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 2.54mm pitch fits most breadboards and headers
  • Flexible and easy to separate for custom wire counts
  • Reusable and durable for repeated use
  • Color-coded for quick identification
  • Compact 20cm length reduces clutter

Cons

  • Only 10 wires per pack, may be insufficient for larger projects
  • Not rated for high voltage or current
  • Short length may limit reach in some setups

Best for

Low-power breadboard prototyping and development board connections

Not ideal for

High-power circuits or applications requiring longer cable runs

Specifications

Cable TypeMale to Female
Length (mm)200
Weight (g)10g
Compatible Pin Header1P-1P
DuPont Line40P
Header Pin Width (mm)2.54
Shipping Weight0.033 kg
Shipping Dimensions6 × 6 × 2 cm

What's in the box

  • 1 x 10 Wire Male to Female Jumper Wires - 20cm

Frequently Asked Questions

What is the pin spacing of these jumper wires?
They are designed for 2.54mm (0.1 inch) pitch pin headers, which is standard on most breadboards and development boards.
Can I use these with Arduino and Raspberry Pi?
Yes, they are compatible with any board that uses 2.54mm headers, including Arduino and Raspberry Pi models with standard GPIO headers.
Are these wires suitable for high-voltage applications?
No, they are intended for low-voltage, low-current signal connections only. Do not use them for mains voltage or high-power circuits.
How many wires are included?
The package contains 10 individual male-to-female jumper wires, each 20cm long.
Can I separate the wires if I need fewer?
Yes, the wires are individual and can be used separately or together as needed.
How should I care for these wires?
Store them in a dry place, avoid bending the connectors sharply, and disconnect by pulling on the connector rather than the wire to prolong life.

Overview

This set of 10 male-to-female jumper wires is a practical solution for solderless circuit prototyping. Each wire measures 20cm and features a 1-pin male connector on one end and a 1-pin female connector on the other, both designed to mate with standard 2.54mm pin headers. The wires are flexible, easy to separate, and can be reused across many projects, making them a staple for any electronics workbench.

Key Features

  • Male-to-female configuration: Connect a male header pin to a female socket or breadboard row without soldering.
  • 20cm length: Provides ample reach for most breadboard and development board setups while keeping wiring tidy.
  • 2.54mm pitch compatibility: Fits standard 0.1-inch spacing pin headers found on many development boards and prototyping accessories.
  • 10-piece set: Enough wires for typical low-pin-count projects, with the flexibility to detach individual wires as needed.
  • Color-coded: Assorted colors help you identify connections quickly and reduce wiring errors.

Specifications Explained

Cable type: Male-to-female means one end plugs into a female header or breadboard, while the other end accepts a male pin. This is ideal for connecting components with male pins to a breadboard or board with female headers.

Length: At 200mm (20cm), these wires are long enough to route around small projects without excess slack. They are shorter than typical 30cm wires, which can be an advantage in compact builds.

Pin header compatibility: The 2.54mm (0.1 inch) pitch is the most common spacing for through-hole components and headers, ensuring broad compatibility with standard prototyping equipment.

DuPont line 40P: This indicates the wires are of the DuPont style, commonly used for jumper cables. The 40P reference relates to the standard ribbon format, but this product provides 10 individual wires.

Compatibility and Requirements

These jumper wires work with any device or breadboard that uses 2.54mm spacing pin headers. They are commonly used with development boards such as Arduino, Raspberry Pi, Orange Pi, and Banana Pi, as well as custom PCBs and test equipment. No soldering is required; simply insert the connectors into the appropriate headers or breadboard slots. Note that the wires are not rated for high voltage or current; they are intended for low-power signal connections.

Typical Uses

  • Breadboard prototyping and circuit testing
  • Connecting sensors and modules to development boards
  • Repairing or modifying electronic projects
  • Educational demonstrations and hobbyist projects
  • PC motherboard and PCB connections

What's in the Box

1 x 10 Wire Male to Female Jumper Wires - 20cm

Quick specs

Cable Type
Male to Female
Length (mm)
200
Weight (g)
10g
Compatible Pin Header
1P-1P
DuPont Line
40P
Header Pin Width (mm)
2.54
See all specifications