
1 / 5 · Click to enlarge
AI Summary
A three-strip DuPont jumper cable combo with 10 cm male-to-male, male-to-female and female-to-female wires, 40 colour-coded leads each on 2.54 mm 1P-1P connectors. The peel-apart ribbon design lets you break off only the wires a circuit needs and reuse the rest.
Key Highlights
- Three gender combinations in one pack: M/M, M/F and F/F
- 40 colour-coded wires per strip for easy trace identification
- 10 cm length keeps breadboard and PCB runs short and tidy
- 2.54 mm 1P-1P connectors fit standard pin headers
- Ribbon design peels apart to the exact wire count needed
- Reusable plug-and-unplug wires for repeated prototyping
Ideal For
- Makers prototyping circuits on a breadboard
- Students learning electronics and microcontroller basics
- Technicians repairing small electronics and motherboards
- Hobbyists wiring sensors and modules to development boards
- Anyone building PCB test setups without soldering
Buying Tip
Confirm your board or header uses 2.54 mm pin spacing before ordering, since these 1P-1P connectors will not mate with other pitches.
Elecvora expert review
Our verdict
A sensible consumable set for anyone who prototypes regularly, since it covers all three gender pairings in one purchase. The 10 cm length and peel-apart ribbon keep bench wiring tidy, though the short reach limits longer runs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- All three gender combinations included
- Colour-coded 40-wire strips for clear tracing
- Peel-apart design avoids waste
- Reusable for repeated prototyping
Cons
- 10 cm length is short for longer interconnects
- Only suits 2.54 mm pitch headers
- Unbranded, so no manufacturer support details
Best for
Breadboard and pin-header prototyping with development boards
Not ideal for
Long cable runs or boards with non-2.54 mm pitch headers
Specifications
| Cable Length | 100 |
|---|---|
| Compatible Pin Header | 1P-1P |
| DuPont Line | 40P |
| Weight (g) | 25 (each) |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 8 × 6 × 6 cm |
What's in the box
- 1 x 10 cm DuPont jumper cable, 2.54 mm 1P-1P male to male, 40 wires
- 1 x 10 cm DuPont jumper cable, 2.54 mm 1P-1P male to female, 40 wires
- 1 x 10 cm DuPont jumper cable, 2.54 mm 1P-1P female to female, 40 wires
Frequently Asked Questions
What is included in this combo?
Do I need to solder anything?
Can I separate the wires?
Which boards are these compatible with?
Are the cables reusable?
How should I store them?
Overview
This combo bundles three separate DuPont jumper strips: one male-to-male, one male-to-female and one female-to-female. Each strip carries 40 colour-coded wires at 10 cm long, terminated with 2.54 mm 1P-1P connectors. Together they cover the three most common gender pairings used when linking breadboards, pin headers and development boards, so you are not stuck hunting for the right cable mid-build.
The wires are supplied as a ribbon but separate easily, letting you tear off a run of two, four or ten wires and leave the remainder intact. That keeps wiring neat and makes the set reusable across many projects.
Key Features
- Three connector types: male-to-male, male-to-female and female-to-female strips in one pack.
- 40 wires per strip: colour-coded for quick identification of each line.
- 10 cm length: short runs that reduce clutter on a breadboard or PCB.
- 2.54 mm pitch: 1P-1P connectors sized for standard pin headers.
- Peel-apart ribbon: detach only the wires your circuit needs.
- Reusable: plug and unplug repeatedly during prototyping.
Specifications Explained
Cable length: each wire measures 10 cm, which suits short interconnects between adjacent boards rather than long cable runs.
DuPont line 40P: every strip contains 40 individual wires, giving plenty of spare leads for multi-signal projects.
Compatible pin header 1P-1P: the single-pin connectors mate with 2.54 mm spacing headers, the common pitch on breadboards and many development boards.
Weight: roughly 25 g per strip, with a shipping weight of about 0.1 kg and shipping dimensions of 8 x 6 x 6 cm, so the pack is light and compact to store.
Compatibility and Requirements
The connectors are designed for 2.54 mm spacing pin headers, so they suit breadboards, PCB projects, PC motherboards and development boards that use that pitch. No soldering is required for basic connections. Check that your board or header uses 2.54 mm spacing before ordering, since other pitches will not mate correctly.
Typical Uses
- Breadboard prototyping and test circuits
- Wiring sensors and modules to development boards
- PCB project interconnects
- PC motherboard and internal equipment links
- Repair and construction work on small electronics
What's in the Box
- 1 x 10 cm DuPont jumper cable, 2.54 mm 1P-1P male to male, 40 wires
- 1 x 10 cm DuPont jumper cable, 2.54 mm 1P-1P male to female, 40 wires
- 1 x 10 cm DuPont jumper cable, 2.54 mm 1P-1P female to female, 40 wires
Quick specs
- Cable Length
- 100
- Compatible Pin Header
- 1P-1P
- DuPont Line
- 40P
- Weight (g)
- 25 (each)
- Shipping Weight
- 0.1 kg
- Shipping Dimensions
- 8 × 6 × 6 cm













