
1 / 5 · Click to enlarge
AI Summary
A compact 35x35x10mm 12V brushless fan with a hydraulic bearing, 8000 RPM speed and a 30cm lead ending in an XH2.54-2P plug. It delivers quiet, low-current spot cooling for 3D printer extruders and small electronic enclosures.
Key Highlights
- Compact 35x35x10mm frame fits tight enclosures and extruder mounts
- 12V DC brushless motor runs at 8000 RPM with just 0.06A draw
- Hydraulic bearing design supports quiet, low-vibration operation
- 30cm cable with XH2.54-2P connector plugs straight into a controller
- Lightweight 5g plastic and metal build reduces mounting strain
- Low 5.00 to 21.00 dB noise range suits noise-sensitive setups
Ideal For
- 3D printer users cooling extruder assemblies
- Makers building compact 12V electronics enclosures
- Hobbyists replacing small 35mm case fans
- Technicians servicing equipment with two-pin fan headers
- DIY project builders needing low-current spot cooling
Buying Tip
Measure your existing fan mount and confirm it accepts a 35x35x10mm frame with an XH2.54-2P socket before ordering.
Elecvora expert review
Our verdict
A sensible small-format 12V fan for tight spaces, with a plug-ready lead and very low current draw. It suits spot cooling tasks where a 35mm frame is the only option, though it is not a high-airflow solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 35x35x10mm size fits cramped mounts
- Very low 0.06A current draw
- Pre-fitted XH2.54-2P connector and 30cm cable
- Hydraulic bearing supports quiet operation
Cons
- Small frame limits total airflow
- Screws and mounting hardware not included
- Requires a matching XH2.54-2P socket or adapter
Best for
3D printer extruder cooling and small 12V electronics enclosures
Not ideal for
Large cases or high-static-pressure cooling jobs needing bigger fans
Specifications
| Item Type | Hydraulic Cooling Fan |
|---|---|
| Dimensions (L x W x H) mm | 35x10 |
| Rated Voltage (VDC) | 12 |
| Rated Speed (RPM) | 8000 |
| Color | Black |
| Material | Plastic, Metal |
| Rated Current (A) | 0.06 |
| Air Flow | 1.24 |
| Static Pressure(mmH20) | 2.115.00 |
| Noise (dB) | 5.0021 |
| Weight (g) | 5 |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 11 × 8 × 3 cm |
What's in the box
- 1 x 12V 3510 Cooling Fan with 30cm XH2.54-2P cable
Frequently Asked Questions
What voltage does this fan need?
What connector is on the cable?
How much current does it draw?
What are the fan dimensions?
Are mounting screws included?
How should I maintain it?
Overview
The Generic DC12V 3510 Hydraulic Cooling Fan is a compact axial fan measuring 35x35x10mm and rated for 12V DC operation. Its brushless motor spins at 8000 RPM, moving 1.24 units of airflow while drawing only 0.06A, so it adds very little load to a controller or power rail. The hydraulic bearing is chosen for smooth, quiet running, and the supplied 30cm cable terminates in an XH2.54-2P connector that mates with common two-pin headers.
With a 5g weight and a slim 10mm profile, this fan suits installations where full-size fans will not fit. It is a practical choice for spot cooling in 3D printers, small electronics enclosures, and DIY builds that already use 12V two-pin fan headers.
Key Features
- 35x35x10mm footprint for space-constrained mounting
- 12V DC brushless motor rated at 8000 RPM
- Low 0.06A current draw for efficient operation
- Hydraulic bearing for quiet, smooth rotation
- 30cm lead with XH2.54-2P connector pre-fitted
- Black plastic and metal construction weighing about 5g
Specifications Explained
Size and fit
The 35x35x10mm dimensions define both the mounting face and the depth. Check that your bracket or duct accepts a 35mm square fan with a 10mm thickness before ordering.
Speed and airflow
An 8000 RPM rating and 1.24 airflow figure describe a small fan tuned for directed spot cooling rather than whole-case ventilation. Static pressure is listed at 2.11 to 5.00 mmH2O, which helps when air must pass through a narrow duct or heatsink.
Power
At 12V DC and 0.06A, the fan is easy to power from a controller board or a regulated 12V rail. Confirm your supply delivers 12V before connecting it.
Noise
The stated noise range is 5.00 to 21.00 dB. Actual loudness depends on mounting, ducting and the surface the fan is fixed to.
Compatibility and Requirements
The fan needs a 12V DC supply and a matching XH2.54-2P socket on the controller or an adapter lead. The 30cm cable gives some reach between the fan and the board. No other accessories, drivers or software are required.
Typical Uses
- Cooling 3D printer extruder assemblies
- Spot cooling inside small electronic enclosures
- DIY and hobby projects using 12V two-pin fan headers
- Replacing a failed fan of the same size and voltage
What's in the Box
One 12V 3510 cooling fan with its 30cm XH2.54-2P cable. Mounting screws and other accessories are not included.
Quick specs
- Item Type
- Hydraulic Cooling Fan
- Dimensions (L x W x H) mm
- 35x10
- Rated Voltage (VDC)
- 12
- Rated Speed (RPM)
- 8000
- Color
- Black
- Material
- Plastic, Metal













