Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 12V centrifugal fan (50x50x15mm) with 7000 RPM and a 30cm XH2.54-2P cable. Its hydraulic bearing ensures long life and low noise for cooling heat sinks and 3D printer hot ends.

Key Highlights

  • 12V DC hydraulic centrifugal fan for focused airflow
  • 7000 RPM speed with ±10% tolerance for consistent cooling
  • Compact 50x50x15mm frame fits tight spaces
  • 300mm cable with XH2.54-2P connector for easy wiring
  • 31mm air inlet and 16x12mm outlet direct air precisely
  • Operates in temperatures from 10°C to 60°C

Ideal For

  • 3D printer enthusiasts upgrading hot end cooling
  • Electronics hobbyists needing compact cooling
  • DIY project builders requiring directed airflow
  • Repair technicians replacing failed fans
  • Makers designing custom enclosures

Buying Tip

Check that your device provides 12V DC power and has an XH2.54-2P header or adapter to match the fan's connector.

Elecvora expert review

Our verdict

This fan offers a practical combination of high speed, compact size, and hydraulic bearing reliability. It is a solid choice for targeted cooling in 3D printers and electronics where space is limited.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High 7000 RPM speed for strong airflow
  • Hydraulic bearing for quiet and durable operation
  • Compact 50x50x15mm size fits tight spaces
  • Pre-wired 300mm cable with XH2.54-2P connector
  • Wide operating temperature range

Cons

  • Requires a 12V DC power source and matching connector
  • No mounting screws included
  • May be louder at full speed than lower-RPM fans

Best for

3D printer hot end cooling and small electronics cooling

Not ideal for

Applications requiring low noise or large-area ventilation

Specifications

Item TypeHydraulic Cooling Fan
Dimensions (L x W x H) mm50x15
Rated Voltage (VDC)12
Rated Speed (RPM)7000
ColorBlack
MaterialPlastic, Metal
Cable Length300
RPM Tolerance±10%
Operating Temperature (°C)10° to 60° C
Air inlet size31mm
Outlet size16 x 12 mm
Shipping Weight0.028 kg
Shipping Dimensions11 × 8 × 2 cm

What's in the box

  • 1 x 12V DC 5015 Hydraulic Centrifugal Fan

Frequently Asked Questions

What is the voltage requirement for this fan?
The fan operates on 12V DC. Do not connect it to higher voltages, as this may damage the fan.
What connector does the fan use?
It comes with a 300mm cable terminated with an XH2.54-2P connector, which is a common 2-pin connector for electronics.
Can this fan be used in a 3D printer?
Yes, it is commonly used for cooling heat sinks on hot ends and printed parts, provided your printer supplies 12V DC and has a compatible connector.
Is the fan noisy?
At 7000 RPM, it produces audible airflow, but the hydraulic bearing helps reduce mechanical noise compared to some bearing types.
What is included in the package?
The package includes one 12V DC 5015 hydraulic centrifugal fan with the attached cable and connector.
How should I maintain the fan?
Keep the fan clean by gently removing dust from the blades and inlet. Avoid exposing it to moisture or temperatures outside the 10°C to 60°C range.

Overview

The DC12V 5015 Hydraulic Centrifugal Fan is a compact, high-speed cooling component designed for electronics and 3D printing applications. Its centrifugal design draws air in through a 31mm inlet and expels it through a 16x12mm outlet, creating a focused stream that is ideal for cooling specific hotspots such as heat sinks, hot ends, and printed parts.

Built with a hydraulic bearing, this fan is engineered for continuous operation and long service life. The 50x50x15mm frame allows it to fit into tight enclosures, while the 300mm cable with an XH2.54-2P connector simplifies connection to standard power sources.

Key Features

  • Hydraulic bearing: Provides smooth, quiet operation and extended durability.
  • High-speed performance: 7000 RPM (with ±10% tolerance) delivers strong airflow for effective cooling.
  • Compact dimensions: 50x50x15mm size suits space-constrained builds.
  • Ready-to-connect cable: 300mm length with XH2.54-2P connector for plug-and-play installation.
  • Wide operating temperature range: Functions reliably from 10°C to 60°C.
  • Durable construction: Made from plastic and metal for long-term use.

Specifications Explained

Rated Voltage (12 VDC): This fan is designed for 12V DC power systems, common in 3D printers, computer cases, and DIY electronics projects.

Rated Speed (7000 RPM): The high rotational speed generates a strong airflow, making it suitable for cooling components that require active heat dissipation.

Air Inlet and Outlet Size: The 31mm inlet and 16x12mm outlet direct air precisely where it is needed, minimizing dispersion.

Cable Length (300mm): The 30cm cable provides flexibility during installation, and the XH2.54-2P connector ensures a secure connection to compatible headers.

Operating Temperature (10°C to 60°C): This range covers typical indoor environments and many electronic enclosures.

Compatibility and Requirements

This fan requires a 12V DC power source and a compatible XH2.54-2P connector or header. It is suitable for any application where a 50x50x15mm fan can be mounted and where 12V power is available. No additional drivers or controllers are needed.

Typical Uses

Common applications include cooling heat sinks on 3D printer hot ends, cooling printed parts, ventilating small electronics enclosures, and providing directed airflow in DIY projects.

What's in the Box

Package includes: 1 x 12V DC 5015 Hydraulic Centrifugal Fan.

Quick specs

Item Type
Hydraulic Cooling Fan
Dimensions (L x W x H) mm
50x15
Rated Voltage (VDC)
12
Rated Speed (RPM)
7000
Color
Black
Material
Plastic, Metal
See all specifications