Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A slim 80 x 80 x 10 mm 5 V cooling fan with double ball bearings and a 30 cm XH2.54-2P cable. It delivers quiet, long-life airflow for small electronics enclosures and project builds.

Key Highlights

  • 80 x 80 x 10 mm slim frame fits tight enclosures
  • 5 VDC rated voltage for common low-voltage project rails
  • Double ball bearings for quiet running and long service life
  • 30 cm cable with XH2.54-2P connector for simple hookup
  • Up to 100 mA operating current, easy on small supplies
  • Black plastic and metal construction with mounting holes

Ideal For

  • Makers building Raspberry Pi and single-board computer projects
  • Hobbyists cooling high-current motor driver boards
  • Technicians replacing an 80 x 80 x 10 mm 5 V fan
  • DIY builders adding airflow to small electronics enclosures
  • Users needing a quiet 5 V fan for compact project cases

Buying Tip

Check that your board or supply provides 5 V and has a matching XH2.54-2P header, and confirm the 10 mm fan depth fits your enclosure before ordering.

Elecvora expert review

Our verdict

A practical, low-cost 5 V fan for small electronics builds where depth is limited and quiet running matters. The double ball bearings and pre-wired XH2.54 connector make it easy to fit and connect without soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Slim 10 mm profile fits shallow enclosures
  • Double ball bearings support quiet, long-life operation
  • Pre-attached 30 cm cable with XH2.54-2P connector
  • Low 100 mA maximum current draw

Cons

  • Only rated for 5 VDC, so no 12 V use
  • Mounting screws and adapters are not listed as included
  • Connector type must match your board or an adapter is needed

Best for

Compact 5 V electronics projects needing quiet active cooling

Not ideal for

High-voltage or high-static-pressure cooling applications

Specifications

Item TypeDouble Ball Cooling Fan
Dimensions (L x W x H) mm80x10
Rated Voltage (VDC)5
ColorBlack
MaterialPlastic, Metal
Cable Length300
Max. Operating Current (A)100
Shipping Weight0.037 kg
Shipping Dimensions11 × 8 × 2 cm

What's in the box

  • 1 x 8010 5V Cooling Fan with 30 cm XH2.54-2P cable

Frequently Asked Questions

What voltage does this fan require?
The fan is rated for 5 VDC. Connect it only to a 5 V supply or a 5 V header such as Raspberry Pi pins 4 and 6.
What connector does the fan use?
It has a 30 cm cable ending in an XH2.54-2P connector. You need a matching header or an adapter lead for your board.
How much current does it draw?
The maximum operating current is 100 mA at 5 V, which is a light load for most small project supplies.
What are the fan dimensions?
The frame measures 80 x 80 x 10 mm, so it is a slim 80 mm fan suited to shallow enclosures.
What is included in the package?
The package contains one 8010 5 V cooling fan with its attached cable. Mounting screws are not listed as included.
Why does it use double ball bearings?
Double ball bearings are chosen for quiet operation and a longer operational life compared with simpler bearing types.

Overview

The Generic 8010 is a compact axial cooling fan built around an 80 x 80 x 10 mm frame. It runs on a 5 VDC supply and is intended for active cooling inside small electronic devices and DIY builds. The double ball bearing construction is the standout detail: it supports quieter operation and a longer working life than a plain sleeve bearing design, which matters when a fan runs continuously in a closed case.

A 30 cm cable is already attached and ends in an XH2.54-2P connector, so you can plug it into a matching header or adapter instead of soldering directly to the fan body. The slim 10 mm depth helps where a standard 25 mm-thick fan will not fit.

Key Features

  • Double ball bearings: designed for low noise and extended operational life.
  • Compact footprint: 80 x 80 x 10 mm suits space-limited enclosures.
  • 5 VDC operation: works with common low-voltage project supplies.
  • Pre-wired connector: 30 cm cable with XH2.54-2P plug for quick connection.
  • Low current draw: rated at up to 100 mA maximum operating current.
  • Simple mounting: plastic and metal body with standard fan mounting holes.

Specifications Explained

80 x 80 x 10 mm: the 80 mm square face moves a useful amount of air for its size, while the 10 mm thickness keeps the fan shallow enough for flat cases and stacked project layouts.

5 VDC rated voltage: the fan is designed for a 5 V rail, so check that your supply or header provides 5 V before connecting it. Do not run it from a higher voltage.

100 mA maximum operating current: at 5 V this is a light load, well within the capability of most small project supplies and board headers, though you should still confirm your source can spare the current.

30 cm cable and XH2.54-2P connector: the cable length gives you room to route the fan away from the board, and the 2-pin XH2.54 connector mates with matching headers or an adapter lead.

Compatibility and Requirements

The fan needs a 5 VDC power source and a matching XH2.54-2P connection point, or an adapter cable if your board uses a different header. It can be connected to Raspberry Pi pins 4 and 6, which provide 5 V and ground. Confirm the polarity of your header before plugging in. No mounting screws or adapters are listed as included, so check your enclosure hardware separately.

Typical Uses

Common applications include cooling single-board computers, high-current motor driver boards, small power modules, PC CPU boxes and general electronics enclosures where airflow is needed but space is tight. It is also a sensible replacement fan for devices that use an 80 x 80 x 10 mm 5 V fan.

What's in the Box

One 8010 5 V cooling fan with the attached 30 cm XH2.54-2P cable.

Quick specs

Item Type
Double Ball Cooling Fan
Dimensions (L x W x H) mm
80x10
Rated Voltage (VDC)
5
Color
Black
Material
Plastic, Metal
Cable Length
300
See all specifications