
1 / 5 · Click to enlarge
AI Summary
A 195mm DF13 5-pin cable for connecting GPS modules to PixHawk and PX4 flight controllers. Pre-crimped with flexible 26AWG silicone wire, it saves time and keeps your build tidy.
Key Highlights
- DF13 5-pin connector for PixHawk and PX4 GPS ports
- 195mm length with 26AWG flexible silicone wire
- Pre-crimped socket and pins for quick installation
- Lightweight at just 3g, ideal for weight-sensitive builds
- Temperature-resistant insulation for reliable use
- Useful spare or replacement for damaged cables
Ideal For
- Drone builders using PixHawk or PX4 flight controllers
- FPV pilots who need a spare GPS cable for field repairs
- RC enthusiasts maintaining APM-series multirotors
- Anyone replacing a damaged 5-pin DF13 lead
Buying Tip
Confirm that both your flight controller and GPS module use a 5-pin DF13 socket, and measure your required cable run before ordering this 195 mm lead.
Elecvora expert review
Our verdict
A simple, well-made cable that does exactly what it should for PixHawk and PX4 users. The pre-crimped DF13 connectors and flexible silicone wire make installation quick and reliable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Pre-crimped connectors save time and avoid crimping errors
- Flexible 26AWG silicone wire routes easily
- Lightweight and compact for clean builds
- Correct length for most GPS installations
Cons
- Only 195 mm long, which may be too short for some large frames
- Not suitable for high-current or power connections
- Unbranded, so no brand-specific support
Best for
PixHawk and PX4 users needing a reliable GPS connection cable
Not ideal for
Builds requiring longer cable runs or non-DF13 connectors
Specifications
| Item Type | Flight Controller Cable |
|---|---|
| Plug Type | DF 13 5 pin |
| Cable Length | 195 (26AWG) |
| Length (mm) | 195 |
| Width (mm) | 8 |
| Weight (g) | 3 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 5 × 1 cm |
What's in the box
- 1 x DF13 5 Pin Flight Controller Cable
Frequently Asked Questions
What is this cable used for?
Is it compatible with my flight controller?
Does it carry power or just signals?
What is included in the package?
How should I care for this cable?
Can I use it for other 5-pin connections?
Overview
The DF13 5 Pin Flight Controller Cable is a purpose-made lead for linking a GPS receiver module to a PixHawk or PX4-series flight controller. It uses the Hirose DF13 connector standard, which is the common 5-pin interface on those boards. At 195 mm long and made with 26AWG wire, the cable is short enough to avoid clutter yet long enough to route neatly inside a typical frame. The silicone insulation remains flexible in different temperatures, and the pre-fitted socket and pins mean you can plug it in without crimping tools. This is a straightforward accessory for anyone assembling, maintaining, or repairing a GPS connection on compatible flight controllers.
Key Features
- DF13 5-pin plug type: Matches the 5-pin GPS ports on PixHawk and PX4 boards.
- 195 mm length: A practical size for clean internal routing without excess slack.
- 26AWG wire: Thin and flexible, helping to keep the installation light and tidy.
- Silicone insulation: Stays pliable across temperature changes and resists stiffening.
- Quality socket and pins: Pre-crimped for reliable contact and easy connection.
- Lightweight: Weighs only 3 g, so it adds almost nothing to your build.
Specifications Explained
Plug type: The DF13 5-pin connector is the standard interface for GPS modules on PixHawk and PX4 flight controllers. Check that your board and GPS module both use a 5-pin DF13 socket before ordering.
Length: At 195 mm, the cable suits most small to medium frames where the GPS is mounted on a mast or rear deck. If you need a longer run, plan for a different cable.
Wire gauge: 26AWG is a common choice for signal and low-power connections. It is flexible and easy to route, but it is not intended for high-current loads.
Weight and dimensions: The cable weighs about 3 g and measures 195 mm long by 8 mm wide, so it has a minimal impact on weight and space.
Compatibility and Requirements
This cable is designed for use with APM and PX4 board series flight controllers, and it is typically used between a PixHawk and a GPS receiver module. It requires a matching 5-pin DF13 socket on both the flight controller and the GPS module. No other tools are needed for installation beyond access to the ports.
Typical Uses
- Connecting a GPS receiver module to a PixHawk flight controller.
- Replacing a damaged or lost DF13 cable on a PX4-based build.
- Keeping a spare lead in your field kit for quick repairs.
- General 5-pin receiver connections where a DF13 plug is required.
What's in the Box
1 x DF13 5 Pin Flight Controller Cable.

Quick specs
- Item Type
- Flight Controller Cable
- Plug Type
- DF 13 5 pin
- Cable Length
- 195 (26AWG)
- Length (mm)
- 195
- Width (mm)
- 8
- Weight (g)
- 3













