
1 / 2 · Click to enlarge
At a glance
This temperature and humidity sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Temperature and Humidity Sensor; temperature measurement ±2°C error.
Key Highlights
- Item Type: Sensor
- Model No. / Name: Temperature and Humidity Sensor
- Temperature measurement: ±2°C error
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | Temperature and Humidity Sensor |
| Measuring Temperature (°C) | 0 ~ 50 |
| Temperature measurement | ±2°C error |
| Humidity Range | 20% ~ 95%RH |
| Resolution | 16 bit |
| Output form | Digital output |
| Length (mm) | 31 |
| Width (mm) | 14 |
| Weight (g) | 5 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 5 × 2 cm |
Overview
The DHT11 Temp Humidity Sensor Module with LED Indicator is listed in our temperature and humidity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Model No. / Name: Temperature and Humidity Sensor
- Measuring Temperature (°C): 0 ~ 50
- Temperature measurement: ±2°C error
- Humidity Range: 20% ~ 95%RH (quoted range is usually line-of-sight; walls and interference shorten it)
- Resolution: 16 bit
- Output form: Digital output
- Length (mm): 31 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The DHT11 Temperature And Humidity Sensor Module with LED is a small humidity and temperature sensor that you can connect to your Arduino and get readings for temperature and humidity in the environment.
Features:
- DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins with 0.1" spacing
- The board has pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.
- 2.5mA max current use during conversion (while requesting data)
- Good for 20-80% humidity readings with 5% accuracy
- Good for 0-50°C temperature readings ±2°C accuracy.
Package Includes:
1 x DHT11 Temperature And Humidity Sensor Module.
3 x Female to Female Connecting cable.
Quick specs
- Item Type
- Sensor
- Model No. / Name
- Temperature and Humidity Sensor
- Measuring Temperature (°C)
- 0 ~ 50
- Temperature measurement
- ±2°C error
- Humidity Range
- 20% ~ 95%RH
- Resolution
- 16 bit













