
1 / 2 · Click to enlarge
At a glance
This cell terminal insulation is a good fit for everyday home and hobby use. Main specs: compatibility 18650/18350 Lithium Battery Cell; hole type PS; hole configuration 2P.
Key Highlights
- Compatibility: 18650/18350 Lithium Battery Cell
- Hole Type: PS
- Hole Configuration: 2P
Ideal For
- Everyday use
Buying Tip
Match the battery chemistry, voltage and connector to your device, and charge it only with a charger made for that chemistry.
Specifications
| Compatibility | 18650/18350 Lithium Battery Cell |
|---|---|
| No. of Holes | 20 holes |
| Hole Type | PS |
| Hole Configuration | 2P |
| Thickness (mm) | 0.25 |
| No. of Sheets | 1 |
| Additional Specs. | No. of Mat in Package: 1 |
| Outer Diameter (mm) | 17 |
| Inner Ring Diameter (mm) | 9 |
| Color | Dark Green |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 12 × 8 × 3 cm |
Overview
The Double Hole Electrical Insulating Adhesive Mat for 18650/18350 PS 2P Battery Cell Terminal Insulation - 20 Holes/pc - 5 X 4 sheet is listed in our cell terminal insulation range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Compatibility: 18650/18350 Lithium Battery Cell (note the battery type so you can order spares or the right charger)
- No. of Holes: 20 holes
- Hole Type: PS
- Hole Configuration: 2P
- Thickness (mm): 0.25
- No. of Sheets: 1
- Additional Specs.: No. of Mat in Package: 1
- Outer Diameter (mm): 17
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This Double Hole Electrical Insulating Adhesive Mat for 18650/18350 PS 2P Battery Cell Terminal Insulation – 20Pcs Better protection to avoid short circuit on batteries. Easy peel and stick application.
The Outer Ring Diameter is 17mm whereas Inner Ring Diameter is 10mm Thickness: 0.25mm one sheet contains battery insulators adhesive paper rings.
- Take off each insulation paper from base paper.
- Put and stick upper hollow adhesive insulation paper on the top of battery positive.
- Put and stick lower solid adhesive insulation paper on the negative.
- Then, you can weld Ni tape or Ni-plated steel plate with positive, negative to make the battery pack.
Note: Colors in the image may vary from the Actual Product. This product contains 1pcs of 10 x double hole adhesive in one single sheet.
Use Case :
Ensures that when cells are packed side-by-side, the metal surfaces (especially at the top where the positive cap is close to the negative can) don’t accidentally touch and cause a short.
Features:
- Better protection to avoid short circuit on batteries.
- Perfect Build for DIY battery packs!
Application:
1. EV battery modules 2. Power tools 3. Energy storage systems 4. Drones 5. Medical devices
Package Includes:
1 x Double Hole Electrical Insulating Adhesive Mat for 18650/18350 PS 2P Battery Cell Terminal Insulation - 20 Holes/pc - 5 X 4 sheet
Quick specs
- Compatibility
- 18650/18350 Lithium Battery Cell
- No. of Holes
- 20 holes
- Hole Type
- PS
- Hole Configuration
- 2P
- Thickness (mm)
- 0.25
- No. of Sheets
- 1













