Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 7-40V to 10A adjustable buck converter with a dual display and CC/CV modes, supplied in a protective case. Its most useful feature is the current limit, which lets you charge batteries and protect sensitive loads while watching readings on screen.

Key Highlights

  • 7-40V input with up to 10A output current
  • Constant-voltage and constant-current adjustment via potentiometers
  • Dual display shows input or output voltage and current
  • Up to 90W natural cooling, 150W with enhanced dissipation
  • Onboard calibration for accurate voltage readings
  • Terminal or solder connections with marked IN and OUT

Ideal For

  • Makers and electronics hobbyists building bench supplies
  • RC and FPV enthusiasts charging and testing battery packs
  • Repair technicians needing a current-limited DC source
  • DIY projects running 12V loads from 24V or 36V systems

Buying Tip

Check that your load stays within 10A and 90W with natural cooling, and add a heatsink or fan if you plan to push toward the 150W enhanced-cooling figure.

Elecvora expert review

Our verdict

A flexible, well-contained buck module that combines adjustable voltage, adjustable current and a readable display in one cased unit. It rewards sensible thermal planning and a quick calibration check before serious use.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adjustable CC and CV modes in one module
  • Dual display with three viewing modes
  • Wide 7-40V input and up to 10A output
  • Supplied in a protective case
  • User calibration for voltage accuracy

Cons

  • Full 150W rating depends on added heat dissipation
  • Factory output default near 20V can confuse first-time users
  • No package contents or accessories confirmed beyond the module

Best for

Bench testing, battery charging and DC-DC projects within 10A

Not ideal for

Applications needing more than 10A or a boost function

Specifications

Voltage Rating7V - 40V
Max. Operating Current (A)Max 10A
Output Power (W)Max 90W in natural cooling, Max 150W in enhance heat dissipation
Operating Temperature (°C)-40 to 85
Conversion efficiencyUp to 95%
Connectionterminals or solder terminals, IN is input, OUT is output
Operating Frequecy150KHz
Length (mm)80
Width (mm)53
Weight (g)135
Shipping Weight0.13 kg
Shipping Dimensions8 × 6 × 4 cm

Frequently Asked Questions

What input voltage does this module accept?
It accepts 7V to 40V DC on the IN terminals and steps it down to your chosen output voltage.
How much current can it deliver?
Output current is rated up to 10A, with a maximum of 90W under natural cooling or up to 150W with enhanced heat dissipation.
Why can't I change the output voltage out of the box?
The factory default output is around 20V. Turn the ADJ-V potentiometer counter-clockwise for ten or more turns until the display changes, then adjust normally.
How do I switch what the display shows?
Press SET to cycle between output voltage, input voltage and alternating display, then press ENT to save. Pressing ENT alone toggles the backlight.
Can I correct an inaccurate voltage reading?
Yes. Power off, hold SET, power on and release SET when the screen flashes, then use SET and ENT to match a known input voltage. The value saves automatically.
How should I connect wires to the module?
Use the screw terminals or solder to the pads, connecting the source to IN and the load to OUT with correct polarity.

Overview

This adjustable step-down module takes a higher input voltage between 7V and 40V and reduces it to a regulated output you set yourself. It handles up to 10A and works in constant-voltage or constant-current mode, which makes it more versatile than a fixed buck converter. The dual display reports voltage and current, and you can choose whether it shows output voltage, input voltage or alternates between the two.

The module arrives in a protective case, so the board and terminals are shielded during bench work, charging sessions or installation inside a project enclosure. At 80 x 53mm and 135g, it fits neatly on a workbench or inside larger builds.

Key Features

  • Dual-mode regulation: set a stable output voltage or cap the current for charging and load protection.
  • Wide input range: 7V to 40V accepts many adapters, battery packs and bench supplies.
  • Up to 10A output: enough headroom for motors, LED arrays and charging tasks.
  • Readable display: three display modes selected with the SET key and saved with ENT.
  • Calibration function: correct the voltage reading against a known reference if it drifts.
  • Flexible wiring: screw terminals or solder pads, clearly marked IN and OUT.

Specifications Explained

Voltage and current. The 7-40V input range covers common 12V, 24V and 36V sources. Output current is capped at 10A, so plan loads within that figure.

Power and cooling. The module is rated for a maximum of 90W with natural cooling and up to 150W when extra heat dissipation is added. Higher currents and large voltage drops generate more heat, so a heatsink or airflow helps at the top end.

Efficiency and switching. Conversion efficiency reaches up to 95%, and the 150kHz operating frequency keeps the design compact.

Display modes. F-0 shows output voltage, F-1 shows input voltage and F-2 alternates between them. The ENT key also switches the backlight.

Environment. The stated operating temperature range is -40 to 85°C.

Compatibility and Requirements

You need a DC source within 7-40V and wiring rated for your expected current. Connections are made at the terminals or solder pads, with IN for the source and OUT for the load. No other accessories are confirmed in the product data.

Typical Uses

  • Bench power for small electronics and prototype circuits.
  • Current-limited charging of battery packs.
  • Stepping down 24V or 36V supplies for 12V loads.
  • Driving LED strings and DC motors within the 10A limit.

If the output voltage appears stuck when new, turn the ADJ-V potentiometer counter-clockwise for ten or more turns until the reading changes; the factory default is around 20V.

Quick specs

Voltage Rating
7V - 40V
Max. Operating Current (A)
Max 10A
Output Power (W)
Max 90W in natural cooling, Max 150W in enhance heat dissipation
Operating Temperature (°C)
-40 to 85
Conversion efficiency
Up to 95%
Connection
terminals or solder terminals, IN is input, OUT is output
See all specifications