Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact dual LED panel meter that displays DC voltage (red) and current up to 10A (blue) at the same time. It needs a separate 4-28VDC supply and includes a built-in shunt for easy installation.

Key Highlights

  • Dual display shows voltage in red and current in blue simultaneously
  • Measures DC 0-100V and up to 10A with built-in shunt
  • 0.28-inch LED digits with 0.1V and 0.01A resolution
  • Wide 4-28VDC operating voltage with reverse polarity protection
  • Fast refresh rate of approximately 500ms per reading
  • Compact 48 x 25mm panel size with 45.5 x 26.5mm cutout

Ideal For

  • Automotive and motorcycle battery monitoring
  • Electric vehicle and e-bike power monitoring
  • DIY power supply and bench testing
  • Solar and renewable energy projects
  • RC and hobby electronics enthusiasts

Buying Tip

Remember that the meter needs a separate 4-28VDC supply to operate, so plan for an extra power connection in your wiring.

Elecvora expert review

Our verdict

This dual LED meter offers a practical way to monitor voltage and current simultaneously in a compact package. Its built-in shunt and wide measurement range make it versatile for low-voltage DC applications, though it requires a separate power supply and careful wiring.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Displays voltage and current at the same time
  • Built-in shunt simplifies current measurement
  • Wide 0-100V voltage range
  • Compact size fits tight spaces
  • Fast refresh rate

Cons

  • Requires a separate 4-28VDC power supply
  • Current measurement limited to 10A
  • Voltage calibration only, no current calibration

Best for

DIY electronics and vehicle battery monitoring

Not ideal for

High-current or AC applications

Specifications

Model No. / NameVoltmeter, Ammeter
Voltage Rating4 to 28VDC
Display0.28" Two-color blue and red
Working Current (mA)20mA
Operating Temperature (°C)-10 to 65° c
Working Pressure80 to 106 kPa.
Operating humidity10 to 80% (non-condensing)
Accuracy0.01
Length (mm)48
Width (mm)25
Shipping Weight0.0002 kg
Shipping Dimensions8 × 5 × 2 cm

What's in the box

  • 1 x Dual LED 0.28" Display for DC0-100V 10A Voltage and Current Test Digital Instrument

Frequently Asked Questions

Can this meter measure AC voltage or current?
No, this meter is designed for DC measurements only. It is not suitable for AC circuits.
Does the meter require an external power supply?
Yes, the meter needs a separate 4-28VDC power supply to operate. The measurement circuit and power supply share a common ground.
What is the maximum current this meter can measure?
The built-in shunt allows current measurement up to 10A. Exceeding this may damage the meter.
How do I calibrate the voltage reading?
Use the voltage calibration potentiometer on the meter to adjust the displayed voltage against a known accurate reference.
What are the dimensions and cutout size?
The meter body measures 48 x 25mm, and it requires a panel cutout of 45.5 x 26.5mm.
Is the current measured on the positive or negative side?
Current is measured in the negative rail. The ground wire of the testing end and the power supply terminal are the same wire.

Overview

The Generic Dual LED 0.28" Display is a panel-mount digital instrument that measures DC voltage and current at the same time. Voltage appears in red and current in blue on a bright two-colour LED display, so you can monitor both parameters without switching modes. The meter is powered by an external 4-28VDC supply and uses a built-in shunt for current measurement, which simplifies wiring in low-voltage DC systems. With a compact 48 x 25mm body and a 45.5 x 26.5mm cutout, it fits into tight panels on vehicles, power supplies, and DIY projects.

Key Features

  • Simultaneous dual display: Red voltage and blue current readings on a single 0.28-inch LED screen.
  • Built-in shunt: Measures current up to 10A without an external shunt resistor.
  • Voltage calibration: A potentiometer lets you fine-tune the voltage reading for accuracy.
  • Reversed connection protection: Helps prevent damage if power leads are swapped.
  • Fast refresh: Updates approximately every 500ms for responsive monitoring.
  • Compact size: 48 x 25mm body with a standard 45.5 x 26.5mm mounting cutout.

Specifications Explained

Voltage range (4-28VDC): This is the supply voltage required to power the meter itself, not the maximum measurement range. The meter can measure DC voltages from 0 to 100V, but it needs a separate 4-28VDC supply to operate.

Current measurement (10A): The built-in shunt allows current readings up to 10A. Current is measured in the negative rail, so the ground wire of the testing end and the power supply terminal are the same wire.

Accuracy and resolution: The meter provides a minimum voltage resolution of 0.1V and a current resolution of 0.01A (10mA). A voltage calibration potentiometer is included for adjustment.

Display: The 0.28-inch LED digits are bright and readable, with red for voltage and blue for current. The refresh rate is about 500ms per update.

Operating conditions: Designed for temperatures from -10 to 65°C, humidity 10-80% non-condensing, and pressures 80-106 kPa.

Compatibility and Requirements

This meter requires an external 4-28VDC power supply for operation. The measurement ground and power supply ground are shared, so plan your wiring accordingly. It is suitable for DC systems only and should not be used with AC voltages. The current measurement is performed on the negative rail, which is common in automotive and low-voltage DC applications.

Typical Uses

Use this panel meter for battery monitoring in cars, electric vehicles, and motorcycles, or for checking voltage and current in DIY power supplies, solar setups, and hobby projects. Its small size and dual display make it handy for any application where space is limited but both readings are needed.

What's in the Box

Package includes one Dual LED 0.28" Display for DC0-100V 10A Voltage and Current Test Digital Instrument.

Quick specs

Model No. / Name
Voltmeter, Ammeter
Voltage Rating
4 to 28VDC
Display
0.28" Two-color blue and red
Working Current (mA)
20mA
Operating Temperature (°C)
-10 to 65° c
Working Pressure
80 to 106 kPa.
See all specifications