Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Dys Samguk Series Wu D2206 is a 2700Kv brushless outrunner motor with a 5 mm shaft and 31 g weight. It suits small FPV quadcopter and RC aircraft builds that need an affordable, smooth-running motor.

Key Highlights

  • 2700Kv rating for responsive throttle on lightweight multirotor builds
  • 5 mm shaft diameter with CW nut for standard prop mounting
  • 31 g motor weight keeps small airframes light and balanced
  • 691.2 W maximum power gives useful headroom for aggressive flying
  • High-purity copper windings support cooler, more efficient operation
  • Designed for vibration-free running in drones and RC aircraft

Ideal For

  • FPV pilots building small quadcopters on a budget
  • Hobbyists assembling lightweight multirotor frames
  • RC airplane builders needing a compact brushless motor
  • Beginners learning drone building and maintenance
  • Makers working on UAV and RC aircraft projects

Buying Tip

Confirm your ESC and propeller choice suit a 2700Kv motor before ordering, and buy one motor per arm plus a spare.

Elecvora expert review

Our verdict

A sensible budget motor for small multirotor and RC aircraft builds, with a useful 2700Kv wind and a light 31 g body. It is not a premium racing unit, but it covers the basics well for hobbyists who want to get airborne without spending much.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Light 31 g weight suits small airframes
  • 5 mm shaft and CW nut simplify prop mounting
  • 691.2 W maximum power gives usable headroom
  • High-purity copper windings for cooler running

Cons

  • Only one motor is included per pack
  • No propeller, ESC or mounting hardware supplied
  • High KV limits it to smaller propeller setups

Best for

Budget-conscious hobbyists building small FPV quads and RC aircraft

Not ideal for

Pilots needing a complete motor set or premium racing hardware in one purchase

Specifications

Motor KV (RPM/V)2700 KV
Model No. / NameD2206
Max. Power (W)691.2
Shaft Diameter5 mm
Nut TypeCW
Width (mm)28
Weight (g)31
Shipping Weight0.044 kg
Shipping Dimensions5 × 4 × 4 cm

What's in the box

  • 1 x Samguk Series Wu D2206 2700Kv BLDC Motor

Frequently Asked Questions

What does 2700Kv mean on this motor?
It means the motor turns approximately 2700 RPM per volt applied, so it is a relatively high-KV motor suited to lighter builds and smaller propellers.
What size shaft does the D2206 have?
It uses a 5 mm shaft with a CW nut, which defines the propeller mounting interface.
How much power can the motor handle?
The maximum power figure is 691.2 W. Actual draw depends on your propeller, battery and throttle use, so match your setup accordingly.
How many motors come in one pack?
One motor is included per pack. Order the quantity needed for your build, plus any spares you want.
What else do I need to run it?
You will need an ESC, a battery, a suitable propeller and the frame or mount for your aircraft. These are not included.
How should I care for the motor?
Keep it clean and dry, check screws and the prop nut regularly, and inspect for vibration or excess heat after flights.

Overview

The Dys Samguk Series Wu D2206 is a brushless outrunner motor rated at 2700Kv. It belongs to the D2206 model family and is aimed at hobbyists building or maintaining small multirotors, quadcopters, RC airplanes and UAV platforms. At 31 g, it is light enough for compact airframes, and its 5 mm shaft with a CW nut makes propeller fitting straightforward.

Key Features

  • 2700Kv wind: a relatively high KV rating that produces strong RPM per volt for lively response on light builds.
  • 5 mm shaft and CW nut: a common shaft size that simplifies matching props and hardware.
  • 691.2 W maximum power: enough headroom for punchy throttle inputs without pushing the motor to its limit in normal use.
  • High-purity copper windings: chosen to reduce heat generation during operation.
  • Vibration-free operation: helps keep flight characteristics clean and reduces stress on the frame.

Specifications Explained

KV (RPM/V) describes how fast the motor spins per volt applied. At 2700Kv, this motor is intended for setups where a higher spin rate is wanted, typically smaller propellers and lighter craft. Maximum power of 691.2 W indicates the upper end of what the motor can handle; real draw depends on your propeller, battery and throttle habits. The 5 mm shaft is a widely used diameter, and the CW nut tells you the thread direction for the supplied or matching prop nut. At 31 g, the motor adds little mass, which matters when every gram affects handling.

Compatibility and Requirements

This motor is intended for drones, quadcopters, multirotors, RC airplanes and UAVs. You will need a suitable electronic speed controller, a battery and a propeller matched to the motor's KV and power rating, plus the frame and mounting hardware for your build. The 5 mm shaft and CW nut define the propeller mounting interface. Check that your chosen ESC and prop combination suits a 2700Kv motor before installation.

Typical Uses

Well suited to small FPV quadcopters, lightweight multirotor projects, RC airplane builds and UAV experiments where a compact, affordable brushless motor is needed. Beginners learning to build and fly can use it as a low-cost starting point, while experienced builders may keep it for spare or budget projects.

What's in the Box

One Samguk Series Wu D2206 2700Kv BLDC motor is included per pack. Propellers, ESCs, batteries and mounting hardware are not included.

Quick specs

Motor KV (RPM/V)
2700 KV
Model No. / Name
D2206
Max. Power (W)
691.2
Shaft Diameter
5 mm
Nut Type
CW
Width (mm)
28
See all specifications