Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by E3D, this 3d printer extruder kit is a good fit for 3D printing users. Main specs: item type Hotend; compatibility Ender 3 Pro, Ender 3, CR10, CR10S, Ender 3 V2, Ender 5, Ender 5 Plus, Ender 5 Pro, Ender 6, CR10S4, CR10S5; supported nozzle diameter (mm) Standard. Check that your power source supplies 24 before connecting it.

Key Highlights

  • Item Type: Hotend
  • Compatibility: Ender 3 Pro, Ender 3, CR10, CR10S, Ender 3 V2, Ender 5, Ender 5 Plus, Ender 5 Pro, Ender 6, CR10S4, CR10S5
  • Supported Nozzle Diameter (mm): Standard

Ideal For

  • Upgrading or repairing a 3D printer
  • Spare parts for long prints
  • Testing new materials

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeHotend
CompatibilityEnder 3 Pro, Ender 3, CR10, CR10S, Ender 3 V2, Ender 5, Ender 5 Plus, Ender 5 Pro, Ender 6, CR10S4, CR10S5
Supported Nozzle Diameter (mm)Standard
Filament Diameter1.75
Assembled (Y/N)Yes
Operating Voltage (VDC)24
Temperature Sensor (Y/N)Yes, Creality Specific
Mounting TypeCreality M3
Weight (g)105
Shipping Weight0.132 kg
Shipping Dimensions22 × 15 × 4 cm

Overview

The E3D Revo CR-24V-1.75mm, made by E3D, is listed in our 3d printer extruder kit range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Hotend
  • Compatibility: Ender 3 Pro, Ender 3, CR10, CR10S, Ender 3 V2, Ender 5, Ender 5 Plus, Ender 5 Pro, Ender 6, CR10S4, CR10S5
  • Supported Nozzle Diameter (mm): Standard (confirm your cable or board uses the same connector)
  • Filament Diameter: 1.75
  • Assembled (Y/N): Yes
  • Operating Voltage (VDC): 24 (match this to your power supply; too high a voltage can damage the part)
  • Temperature Sensor (Y/N): Yes, Creality Specific
  • Mounting Type: Creality M3

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

E3D Revo CR Creality mounting holes. Convenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts! Easy nozzle swaps. A variety of Revo Nozzles enhances the capabilities of your 3D printer without difficult nozzle-changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening. Simple, hassle-free connection. We’ve included some solderless, crimples, and butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle. Better reliability. Revo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening is needed. Better efficiency. The included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock hot-end. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to the built-in PTC behavior of the heater, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.   Revo CR is directly compatible with the following Creality 3D printers:
  • Ender 3
  • Ender 3 Pro
  • Ender 3 V2
  • Ender 5
  • Ender 5 Pro
  • Ender 5 Plus
  • Ender 6
  • CR10
  • CR10S
  • CR10S4
  • CR10S5
Please note:
  1. Revo CR can be used with other Creality printers using the NTC thermistor, however, you may need to make modifications to the mount and or Z sensor.
  2. You may need to adjust the Z height when changing nozzles.
  3. Please check whether your specific printer runs 12V or 24V before purchasing and assembling.

Features:

  1. Upgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles
  2. No extra mounts or adapters needed: Pre-drilled M3 clearance holes match C Reality's X carriage mounting pattern for easy installation
  3. No firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor
  4. Includes solderless, crimples, and butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle
  5. Detailed upgrade guides created by us help you get 3D printing quickly

Packages Includes:

5 x butt splice connectors 1x Revo HeaterCore spring 1 x Revo CR HeaterCore:
    • Embedded 12V or 24V 40W heater cartridge
    • Embedded 100K NTC thermistor
Note: M3 bolts not provided

Quick specs

Item Type
Hotend
Compatibility
Ender 3 Pro, Ender 3, CR10, CR10S, Ender 3 V2, Ender 5, Ender 5 Plus, Ender 5 Pro, Ender 6, CR10S4, CR10S5
Supported Nozzle Diameter (mm)
Standard
Filament Diameter
1.75
Assembled (Y/N)
Yes
Operating Voltage (VDC)
24
See all specifications