Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact infrared photoelectric sensor switch with an NPN normally open output, operating on 6-36V DC. Its wide voltage range lets the same unit work in 12V and 24V detection setups without extra regulation.

Key Highlights

  • Infrared photoelectric sensing for non-contact object detection
  • Wide 6-36V DC operating voltage covers common 12V and 24V systems
  • NPN output with normally open (NO) switching behaviour
  • 300 mA rated current for relays, PLC inputs and indicators
  • E3F-DS30 series body for straightforward panel or bracket mounting
  • Lightweight at 55 g shipping weight for easy integration

Ideal For

  • Automation hobbyists building PLC or microcontroller sensing projects
  • Maintenance technicians replacing worn mechanical limit switches
  • Makers needing non-contact object counting on small conveyors
  • Workshop builders adding presence detection to gates and doors
  • Electronics learners working with NPN sensor outputs

Buying Tip

Confirm your controller accepts a sinking (NPN) normally open signal and that your DC supply sits inside 6-36V before ordering.

Elecvora expert review

Our verdict

A straightforward, flexible detection component that earns its place in small automation builds thanks to the wide 6-36V DC range and familiar NPN normally open output. It is a utility part rather than a precision instrument, so treat it as a reliable switch point, not a measuring device.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 6-36V DC range suits both 12V and 24V systems
  • NPN normally open output matches common PLC and relay inputs
  • Compact and light, easy to fit into tight panels
  • Simple three-wire style integration for hobby and maintenance work

Cons

  • No cable, bracket or power supply included
  • Detection distance and target behaviour are not specified in the listing
  • Output is limited to a 300 mA rating, so heavier loads need a driver

Best for

Non-contact object detection in small DC automation and maker projects

Not ideal for

High-precision distance measurement or direct switching of heavy loads

Specifications

Model No. / NameSensor Switch
Operating Voltage (VDC)6 to 36
Model SeriesE3F-DS30
Switch TypePhotoelectric Switch
Rated current (mA)300
Shipping Weight0.055 kg
Shipping Dimensions12 × 8 × 3 cm

What's in the box

  • 1 x E3F-DS30C4 DC 6-36V NPN NO Infrared Sensor Photoelectric Switch

Frequently Asked Questions

What voltage does the E3F-DS30C4 need?
It operates on a DC supply between 6V and 36V. That covers common 12V and 24V control circuits, but the supply must stay inside that range.
What does NPN normally open mean?
The output sinks to the negative rail when the sensor detects an object, and it stays inactive until then. Your controller input should be designed for a sinking NPN signal.
Can it switch a motor or solenoid directly?
The output is rated at 300 mA, which suits relays, opto-isolated inputs and small indicators. Motors and larger solenoids should be driven through a separate relay or driver stage.
What is included with the sensor?
The package contains one E3F-DS30C4 DC 6-36V NPN NO infrared photoelectric sensor switch. Cable, mounting bracket and power supply are not included.
How do I wire it up?
Connect the power leads to your DC supply within the 6-36V range and take the output lead to your controller input. Confirm the lead markings on the unit before powering it up.
How should I care for the sensor?
Keep the front sensing face clean and free of dust, and mount it where it will not be struck or exposed to water. Check the wiring and supply voltage if detection becomes erratic.

Overview

The E3F-DS30C4 is an infrared photoelectric switch designed for non-contact detection in automated systems. Instead of a mechanical lever or contact, it senses an object in its detection path and switches its output accordingly. That makes it useful wherever repeated physical contact would wear out a limit switch or where the target cannot be touched.

It belongs to the E3F-DS30 model series and uses an NPN output in a normally open (NO) configuration. The supply range is 6 to 36V DC, so the same sensor can be dropped into 12V and 24V DC control circuits without a separate regulator.

Key Features

  • Infrared photoelectric sensing principle for non-contact detection
  • NPN output configuration, normally open (NO)
  • Operating voltage from 6V to 36V DC
  • 300 mA rated current
  • Compact, lightweight housing at roughly 55 g shipping weight

Specifications Explained

Operating voltage: 6-36V DC

This is the most flexible part of the spec. Because the input range starts at 6V and reaches 36V, the sensor tolerates the two voltages most small automation builds use, 12V and 24V, plus a fair margin either side. You still need to confirm your supply stays inside that window.

NPN, normally open output

NPN means the output switches to the negative rail when active, which is the common convention for PLC inputs and many relay driver boards. Normally open means the output is inactive until the sensor detects an object, then it changes state. Check that your controller expects a sinking (NPN) signal before wiring.

300 mA rated current

The 300 mA figure describes the current the output is rated for. Small relays, opto-isolated inputs and indicator lamps fit comfortably; heavier loads such as motors or high-power solenoids need a separate driver stage.

Compatibility and Requirements

The sensor needs a DC supply within 6-36V and a controller or load that accepts an NPN normally open signal. Wiring, mounting hardware and a suitable power source are not included, so plan for those separately. Confirm the detection distance and target type required by your application against the sensor's infrared sensing behaviour before committing to a layout.

Typical Uses

  • Object counting on small conveyors and feed lines
  • End-of-travel and position detection on linear mechanisms
  • Gate, door and passage monitoring in automation projects
  • Presence sensing for PLC and microcontroller inputs
  • General non-contact switching in workshop and maker builds

What's in the Box

One E3F-DS30C4 DC 6-36V NPN NO infrared photoelectric sensor switch. No cable, bracket or power supply is included.

Quick specs

Model No. / Name
Sensor Switch
Operating Voltage (VDC)
6 to 36
Model Series
E3F-DS30
Switch Type
Photoelectric Switch
Rated current (mA)
300
Shipping Weight
0.055 kg
See all specifications