
1 / 5 · Click to enlarge
AI Summary
Five genuine Elegoo FEP films for the Mars 4 DLP, each 200 x 130 mm and 0.127 mm thick. High UV transmittance and a non-stick surface make model removal easy and extend film life.
Key Highlights
- Five replacement FEP films for Elegoo Mars 4 DLP
- 200 x 130 mm size with 0.127 mm thickness
- 95% UV light transmittance for efficient curing
- Non-stick surface for easy model removal
- Wear and chemical resistant for long life
- Supports up to 9000 releases per film
Ideal For
- Owners of the Elegoo Mars 4 DLP resin printer
- Hobbyists who print miniatures and models regularly
- Professionals needing reliable spare films for production
- Users replacing worn or damaged vat films
- Makers who keep a supply of consumables on hand
Buying Tip
Check your vat film regularly for cloudiness or scratches; keeping a spare from this 5-pack lets you replace it immediately and avoid failed prints.
Elecvora expert review
Our verdict
The Elegoo Mars 4 DLP FEP Film 5-Pack is a practical consumable for any Mars 4 DLP owner. The films offer high UV clarity and a non-stick surface that simplifies model removal, with a lifespan that outlasts many standard films.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Precise fit for Mars 4 DLP vat
- High 95% UV transmittance for efficient curing
- Non-stick surface aids model release
- Long lifespan up to 9000 releases
- Pack of five provides good value and spares
Cons
- Only compatible with Mars 4 DLP, not other printers
- Requires careful installation to avoid wrinkles
- Film life varies with resin type and print settings
Best for
Mars 4 DLP owners who print regularly and want reliable spares
Not ideal for
Users of other resin printer models
Specifications
| Item Type | FEP film |
|---|---|
| Compatibility | Mars 4 DLP |
| Material | FEP |
| Dimensions (L x W x H) mm | 200 x 130mm (Film) |
| Thickness (mm) | 0.127 |
| Weight (g) | 158.75 |
| Shipping Weight | 0.168 kg |
| Shipping Dimensions | 24 × 17 × 2 cm |
What's in the box
- 5 x Elegoo Mars 4 DLP FEP film
Frequently Asked Questions
Are these films compatible with other Elegoo printers?
How often should I replace the FEP film?
Do I need to use a release agent with this film?
What is included in the package?
How should I care for the film?
Does the film require any special installation tools?
Overview
The Elegoo Mars 4 DLP FEP Film 5-Pack gives you a ready supply of replacement release films for your Elegoo Mars 4 DLP resin printer. Each film is cut to 200 x 130 mm and has a thickness of 0.127 mm, matching the vat dimensions of the Mars 4 DLP. FEP films sit at the bottom of the resin vat and separate each cured layer from the transparent window, so their condition directly affects print success and surface quality. This pack of five ensures you can swap in a fresh film when needed and keep printing without long delays.
Key Features
- High UV transmittance: 95% UV light passes through, allowing the printer’s light source to cure resin quickly and accurately.
- Easy model release: The non-stick surface and low release tension reduce adhesion, so prints detach from the film with less force.
- Durable construction: Resistant to wear and chemicals, the film is designed to withstand repeated print cycles.
- Extended lifespan: Lasts up to 50% longer than regular films and supports up to 9000 releases per film.
- Smooth surface: Free from wrinkles, scratches, and bubbles for even resin adhesion and consistent print quality.
Specifications Explained
Dimensions: At 200 x 130 mm, the film is sized for the Mars 4 DLP resin vat. The 0.127 mm thickness is a standard for FEP films, balancing flexibility with durability.
UV transmittance: The 95% figure means most of the light from the printer reaches the resin, which helps maintain fine detail and reduce cure times.
Lifespan: The film is rated for up to 9000 releases, roughly 50% more than standard films. Actual life depends on resin type, print settings, and handling.
Compatibility and Requirements
These films are designed for the Elegoo Mars 4 DLP resin 3D printer. No other compatibility is specified. You will need the printer’s original resin vat and the usual tools for replacing a film, such as a screwdriver and clean workspace. Always handle films by the edges to avoid contaminating the surface.
Typical Uses
Use these films as replacement parts when the film in your Mars 4 DLP vat becomes cloudy, scratched, or damaged. Keeping spares on hand is useful for anyone who prints frequently, runs multiple vats, or wants to minimize downtime between projects. The pack is also suitable for users who prefer to replace films proactively to maintain print quality.
What's in the Box
Five Elegoo Mars 4 DLP FEP films.
Quick specs
- Item Type
- FEP film
- Compatibility
- Mars 4 DLP
- Material
- FEP
- Dimensions (L x W x H) mm
- 200 x 130mm (Film)
- Thickness (mm)
- 0.127
- Weight (g)
- 158.75
















