
1 / 4 · Click to enlarge
AI Summary
Five replacement ACF release films sized for the Elegoo Saturn 3 Ultra resin printer. The 0.3 mm PFA sheet resists wear and delivers high UV transmittance with a non-stick surface for clean model release.
Key Highlights
- Five 195 x 290 mm ACF films for the Saturn 3 Ultra
- 0.3 mm PFA construction resists tearing during printing
- About 92% UV light transmittance for accurate layer curing
- Non-stick surface releases models with low tension
- Frosted and smooth sides for simple orientation
- Chemical, wear and UV resistant for long service life
Ideal For
- Saturn 3 Ultra owners replacing a worn vat film
- Resin printing hobbyists who keep spare consumables
- Small print farms that need to avoid downtime
- Users running faster print profiles with RAPID resin
- Makers doing frequent long-duration prints
Buying Tip
Confirm your printer is the Saturn 3 Ultra and match the 195 x 290 mm sheet size before ordering, since this film is cut for that vat specifically.
Elecvora expert review
Our verdict
A sensible consumable pack for Saturn 3 Ultra owners: five correctly sized 0.3 mm PFA sheets with strong UV transmission and a reliable non-stick surface. Buy it as maintenance stock rather than an upgrade, and expect to replace film periodically as with any resin printer.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Five sheets per pack gives good replacement value
- 0.3 mm PFA resists tearing during peeling
- About 92% UV transmittance supports accurate curing
- Frosted and smooth faces make orientation clear
- Chemical, wear and UV resistance for longer service
Cons
- Fits the Saturn 3 Ultra only, not other printers
- Installation requires care to avoid wrinkles and leaks
- Film is a wear item and will still need periodic replacement
Best for
Saturn 3 Ultra owners who want spare release film on hand
Not ideal for
Owners of other resin printer models or anyone expecting a permanent vat film
Specifications
| Item Type | ACF Film |
|---|---|
| Compatibility | Saturn 3 Ultra |
| Material | PFA |
| Size (mm) | 195 x 290 |
| Weight (g) | 300 |
| Shipping Weight | 0.45 kg |
| Shipping Dimensions | 33 × 23 × 2 cm |
What's in the box
- 5 x Elegoo Saturn 3 Ultra ACF release films (195 x 290 mm)
Frequently Asked Questions
Which printer is this film compatible with?
Which side faces the LCD screen?
How thick is the film?
How many films are included?
Does the film affect print speed?
How should I store spare films?
Overview
The Elegoo Saturn 3 Ultra ACF Film 5-Pack is a consumable kit for owners of the Saturn 3 Ultra resin 3D printer. Release film sits at the bottom of the resin vat, and it takes constant punishment: UV exposure, chemical contact with resin, and the peeling force of every layer. This pack gives you five identical sheets so a worn or damaged film does not stall your workflow.
Each sheet is 195 x 290 mm and 0.3 mm thick, made from PFA with a composite construction. The design keeps the film from adhering to the LCD screen, which protects the display and preserves the release effect print after print.
Key Features
- Composite construction: helps prevent the film from sticking to the LCD screen and supports consistent release.
- 0.3 mm thickness: a robust sheet that resists breaking during the print cycle.
- 92% UV light transmittance: supports fast, accurate curing of each layer.
- Non-stick surface: low release tension helps models detach without wrinkles, scratches or bubbles interfering.
- Chemical, wear and UV stability: built to withstand prolonged exposure to resin and the UV light source.
- Two distinct faces: one frosted and one smooth, so orientation is easy to confirm.
Specifications Explained
Size and fit
At 195 x 290 mm, the sheet is sized for the Saturn 3 Ultra vat. Check your existing film dimensions before fitting if you are unsure which printer you own.
Thickness
The 0.3 mm thickness is the practical middle ground: thick enough to resist tearing during peeling, yet thin enough to keep light transmission high.
Material and UV performance
PFA gives the film its release character, while roughly 92% UV transmittance means most of the light from the LCD reaches the resin. The result is more accurate curing and a smoother model surface.
Orientation
The frosted side faces the LCD screen and the smooth side faces the resin. Getting this right is essential for release performance.
Compatibility and Requirements
This film is intended for the Elegoo Saturn 3 Ultra resin 3D printer. It is a consumable replacement part, not a standalone product, and it requires a compatible printer, resin and normal safety equipment to use. No other printer models are confirmed in the supplied data.
Typical Uses
Use these sheets to replace a cloudy, scratched or punctured vat film on your Saturn 3 Ultra. Keeping spares on the shelf is useful for anyone running frequent or long prints, and for print farms that cannot afford downtime. The film also suits users working with RAPID resin who want to take advantage of faster print profiles.
What's in the Box
Five ACF release films for the Elegoo Saturn 3 Ultra.
Quick specs
- Item Type
- ACF Film
- Compatibility
- Saturn 3 Ultra
- Material
- PFA
- Size (mm)
- 195 x 290
- Weight (g)
- 300
- Shipping Weight
- 0.45 kg
















