
1 / 6 · Click to enlarge
At a glance
This solar charger module is a good fit for makers, students and electronics hobbyists. Main specs: output voltage 12; output current (a) Variable; charging current 2. Check that your power source supplies 12 before connecting it.
Key Highlights
- Output Voltage: 12
- Output Current (A): Variable
- Charging Current: 2
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Output Voltage | 12 |
|---|---|
| Output Current (A) | Variable |
| Charging Current | 2 |
| Operating Voltage (VDC) | 12 |
| Operating Temperature (°C) | -40 to 85 |
| Switching frequency | 300 |
| Length (mm) | 45 |
| Width (mm) | 20 |
| Weight (g) | 10 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 5 × 2 × 1 cm |
Overview
The Elejoy CN3791 12V MPPT Solar Charger Module is listed in our solar charger module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Output Voltage: 12 (match this to your power supply; too high a voltage can damage the part)
- Output Current (A): Variable (your supply must deliver at least this much current)
- Charging Current: 2 (check which plug or cable it needs)
- Operating Voltage (VDC): 12 (match this to your power supply; too high a voltage can damage the part)
- Operating Temperature (°C): -40 to 85
- Switching frequency: 300 (make sure the rest of your system works at this frequency)
- Length (mm): 45 (measure your mounting space before ordering)
- Width (mm): 20 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provides you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargeable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging! Solar maximum power point tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch-mode DC-DC converter to realize the MPPT function, keep the output voltage, and charging current product maximize (output).
Features:
- Maximum Power Point Tracking (MPPT) Solar Charger Module
- 2-Pin JST Connectors for Solar Panel and Battery Connection
- PWM Switching Frequency of 300KHz
- Maximum Charging Current of 2A
Package Includes:
1 x Elejoy CN3791 12V MPPT Solar Charger Module 1 x Pair of wires with 2-pin JST connector on both sides;
Quick specs
- Output Voltage
- 12
- Output Current (A)
- Variable
- Charging Current
- 2
- Operating Voltage (VDC)
- 12
- Operating Temperature (°C)
- -40 to 85
- Switching frequency
- 300













