Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type Brushless ESC; model no. / name Emax SimonK Series 30A; burst current (a) 40.

Key Highlights

  • Item Type: Brushless ESC
  • Model No. / Name: Emax SimonK Series 30A
  • Burst Current (A): 40

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeBrushless ESC
Model No. / NameEmax SimonK Series 30A
Burst Current (A)40
Constant Current (A)30
BEC (Y/N)Yes, (5V/2A)
Compatible LiPO Batteries2S to 3S
Dimensions (L x W x H) mm52 x 26 x 7
Weight (g)28
ApplicationBLDC Motors, Multirotors, Rc Planes etc.
ColorBlack and Red
Shipping Weight0.03 kg
Shipping Dimensions6 × 3 × 1 cm

Overview

The Emax SimonK Series Multirotor 30A Brushless ESC (Original) is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Brushless ESC
  • Model No. / Name: Emax SimonK Series 30A
  • Burst Current (A): 40 (your supply must deliver at least this much current)
  • Constant Current (A): 30 (your supply must deliver at least this much current)
  • BEC (Y/N): Yes, (5V/2A)
  • Compatible LiPO Batteries: 2S to 3S
  • Dimensions (L x W x H) mm: 52 x 26 x 7 (measure your mounting space before ordering)
  • Weight (g): 28 (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Emax SimonK Series Multirotor 30A Brushless ESC (Original) is a brushless dc motor speed controller. The low output resistance greatly enhances power stability, and this will improve the great battery life. Emax SimonK Series Multirotor 30A Brushless ESC is programmed to start the brushless dc motor. This ESC has a greater current handling capacity which is 30A continuous and the peak current is 40A for the last 10 seconds only.

100% Guaranteed of Original & Genuine Emax Product


Features :

  1. Based on SimonK firmware, further optimized to the perfect drive performance.
  2. Low-voltage protection, over-heat protection, and throttle signal loss protection.
  3. Separate power supply for MCU and BEC, enhancing the ESC’s ability to eliminate magnetic interference.
  4. Parameters of the ESC can be set via a program card or transmitter.
  5. Throttle range can be set to be compatible with different receivers.
  6. Equipped with built-in linear BEC or switch BEC.
  7. Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.

Package Includes :

1x Emax SimonK Series Multirotor 30A Brushless ESC module.

Quick specs

Item Type
Brushless ESC
Model No. / Name
Emax SimonK Series 30A
Burst Current (A)
40
Constant Current (A)
30
BEC (Y/N)
Yes, (5V/2A)
Compatible LiPO Batteries
2S to 3S
See all specifications