
1 / 3 · Click to enlarge
AI Summary
This compact module combines ENS160 gas sensing for eCO2 and TVOC with AHT21 temperature and humidity measurement, all over a simple I2C interface. It provides real-time indoor air quality data for smart homes, HVAC, and IoT projects.
Key Highlights
- Measures eCO2 and TVOC for air quality assessment
- AHT21 sensor provides accurate temperature and humidity readings
- I2C interface for easy microcontroller integration
- Wide 1.8 to 3.6 VDC supply voltage
- Compact 25 x 20 mm board with 2 g weight
- Header pin included for quick prototyping
Ideal For
- Makers building indoor air quality monitors
- IoT developers integrating environmental sensing
- HVAC and ventilation system designers
- Smart home enthusiasts automating air purifiers
- Agricultural technologists monitoring greenhouse conditions
Buying Tip
Check that your microcontroller's logic level matches the 1.8-3.6 V supply range and that you have I2C pull-up resistors available if your board does not include them.
Elecvora expert review
Our verdict
The ENS160+AHT21 module offers a practical way to add comprehensive air quality, temperature, and humidity sensing to projects with minimal wiring. Its compact size and wide voltage range make it adaptable, though users should be prepared to handle library setup and pull-up resistors.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Combines four key environmental measurements on one board
- I2C interface simplifies connection to most microcontrollers
- Wide 1.8-3.6 VDC supply range suits various logic levels
- Very small and lightweight for embedded applications
- Header pin included for immediate prototyping
Cons
- Requires soldering the header pin for breadboard use
- No software libraries or documentation included
- Needs external I2C pull-up resistors if not present on host board
Best for
Developers and makers building compact environmental monitoring devices
Not ideal for
Users seeking a plug-and-play solution with full software support
Specifications
| Item Type | Sensor Module |
|---|---|
| Model No. / Name | ENS160+AHT21 |
| Rated Voltage (VDC) | 1.8 to 3.6 DC |
| Interface | I2C |
| Length (mm) | 25 |
| Width (mm) | 20 |
| Weight (g) | 02 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 5 × 2 cm |
What's in the box
- 1 x ENS160+AHT21 Air Quality and Temperature and Humidity Sensor
- 1 x Header Pin
Frequently Asked Questions
What does the ENS160 sensor measure?
What is the AHT21 sensor used for?
What voltage does the module require?
How do I connect the module to my microcontroller?
Is a header pin included?
Do I need to install any libraries?
Overview
The ENS160+AHT21 is an all-in-one sensor module that brings together two essential environmental sensors on a single compact board. The ENS160 handles air quality by measuring equivalent CO2 (eCO2) and total volatile organic compounds (TVOC), while the AHT21 provides temperature and humidity data. This combination makes it straightforward to monitor indoor environmental conditions with one module and a single I2C connection.
Key Features
- Dual-sensor design: ENS160 gas sensor and AHT21 temperature/humidity sensor on one board.
- Air quality metrics: Outputs eCO2 and TVOC values for assessing indoor air quality.
- Temperature and humidity: AHT21 delivers reliable readings for climate monitoring.
- Simple integration: I2C interface works with most microcontrollers and development boards.
- Flexible power: Operates from 1.8 to 3.6 VDC, suiting 3.3 V and 1.8 V logic systems.
- Compact footprint: 25 mm x 20 mm board weighs just 2 g, ideal for space-constrained builds.
Specifications Explained
Rated voltage (1.8 to 3.6 VDC): The module can be powered from a range of low-voltage supplies, making it compatible with common 3.3 V microcontroller boards as well as 1.8 V systems. Always stay within this range to avoid damage.
I2C interface: This two-wire bus is widely supported and allows the module to share a bus with other I2C devices. You will need to connect SDA, SCL, power, and ground, and use the correct pull-up resistors as required by your host board.
Dimensions and weight: At 25 mm long, 20 mm wide, and 2 g, the board fits easily into handheld devices, wall-mounted enclosures, and compact IoT nodes.
Compatibility and Requirements
The module requires a host microcontroller or development board with an I2C interface and a power supply within 1.8 to 3.6 VDC. No additional libraries or software are included; you will need to source appropriate code for the ENS160 and AHT21 sensors from your platform's ecosystem. The included header pin must be soldered to the board if you want to use it with a breadboard or female jumper wires.
Typical Uses
- Indoor air quality monitors for homes and classrooms
- HVAC and ventilation control systems
- Air purifier feedback and automation
- IoT environmental sensing nodes
- Smart agriculture and greenhouse monitoring
- Building management and industrial environment tracking
What's in the Box
- 1 x ENS160+AHT21 Air Quality and Temperature and Humidity Sensor
- 1 x Header Pin
Quick specs
- Item Type
- Sensor Module
- Model No. / Name
- ENS160+AHT21
- Rated Voltage (VDC)
- 1.8 to 3.6 DC
- Interface
- I2C
- Length (mm)
- 25
- Width (mm)
- 20













