
1 / 3 · Click to enlarge
AI Summary
A compact Espressif board that handles automatic firmware download, UART serial communication and JTAG debugging over one USB connection. Its dual-port recognition and jumper-selectable 3.3V or 5V output make it a handy companion for ESP8266 and ESP32 projects.
Key Highlights
- Automatic firmware downloading plus UART and JTAG debugging in one board
- Single USB cable powers the board and links it to your computer
- Recognised as two separate ports for programming and debugging
- Jumper-selectable 3.3V or 5V output for different target boards
- RX/TX and JTAG signals fixed at 3.3V for stable logic levels
- Compact 68 × 26 mm board weighing only 13 g
Ideal For
- Embedded developers debugging ESP32 and ESP8266 firmware
- Makers flashing custom firmware to ESP32-C3 and ESP32-S2/S3 boards
- Electronics students learning JTAG and UART workflows
- IoT product teams prototyping with Espressif chips
- Bench engineers who want one compact programmer and debugger
Buying Tip
Confirm whether your target board expects 3.3V or 5V power before setting the output jumpers, and remember that the RX/TX and JTAG signals themselves stay at 3.3V.
Elecvora expert review
Our verdict
The ESP-Prog-2 packs programming, serial and JTAG debugging into a board small enough to leave on the bench permanently. For anyone working across the ESP family, it removes the cable swapping that slows down day-to-day development.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Combines firmware download, UART and JTAG in one board
- Dual-port recognition keeps programming and debugging separate
- Jumper-selectable 3.3V or 5V output suits different targets
- Very small and light at 68 × 26 mm and 13 g
Cons
- Signal levels are fixed at 3.3V, so 5V-logic targets need care
- A USB cable and host computer are required, and neither is listed in the box
Best for
Developers and makers working with ESP8266, ESP32, ESP32-S2/S3 and ESP32-C3 boards
Not ideal for
Projects using non-ESP microcontrollers with different logic levels
Specifications
| Item Type | Development Board |
|---|---|
| Interface | USB, UART (RX/TX), JTAG |
| Power Input | USB 5V |
| Output Voltage | 3.3V / 5V |
| Input signal | Fixed at 3.3V for RX/TX and JTAG |
| Length (mm) | 68 |
| Width (mm) | 26 |
| Weight (g) | 13 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 8 × 7 × 2 cm |
What's in the box
- 1 × Espressif ESP-Prog-2 Development Board
- 2 × FRC Cable
Frequently Asked Questions
What can the ESP-Prog-2 do?
Which chips does it support?
How is it powered, and what voltage does it output?
Why do two ports appear when I connect it?
What comes in the package?
How should I store and handle the board?
Overview
The Espressif ESP-Prog-2 is a dedicated programming and debugging companion for ESP-based development. Instead of juggling separate adapters, you get automatic firmware downloading, UART serial communication and JTAG debugging on a single board that connects to your computer through one USB cable. The board is small enough to sit next to a breadboard, yet it covers the everyday tasks of embedded development: flashing new firmware, watching serial output and stepping through code with a debugger.
Key Features
- Three tools in one: automatic firmware download, UART RX/TX serial communication and JTAG debugging.
- Single-cable setup: USB provides both power and data, and the computer recognises the board as two separate ports.
- Flexible power output: choose 3.3V or 5V with jumpers to match your target board.
- Stable signal levels: RX/TX and JTAG inputs are fixed at 3.3V for predictable communication.
- Compact footprint: 68 mm long, 26 mm wide and just 13 g, so it tucks easily into a workspace.
Specifications Explained
The USB interface carries power in at 5V and handles data to and from your computer. Two separate ports appear once connected, which keeps programming traffic and debug traffic apart. The UART RX/TX lines and the JTAG interface both operate at a fixed 3.3V input signal level, matching the logic used by most ESP chips. Output voltage is selectable between 3.3V and 5V, so the board can supply a target that expects either rail. At 68 × 26 mm and 13 g, it adds almost nothing to the size or weight of a bench setup.
Compatibility and Requirements
The board is intended for ESP8266, ESP32, ESP32-S2/S3 and ESP32-C3 development. You need a computer with a USB port and a USB cable, plus the appropriate development toolchain for your chip. Because signal levels are fixed at 3.3V, check that your target board's logic matches before connecting the RX/TX or JTAG lines.
Typical Uses
- Flashing firmware to ESP32 and ESP8266 boards during development.
- Reading serial logs while testing sensor or connectivity code.
- Step-by-step JTAG debugging of embedded applications.
- Bench work with ESP32-S2/S3 and ESP32-C3 projects.
What's in the Box
- 1 × Espressif ESP-Prog-2 Development Board
- 2 × FRC Cable
Quick specs
- Item Type
- Development Board
- Interface
- USB, UART (RX/TX), JTAG
- Power Input
- USB 5V
- Output Voltage
- 3.3V / 5V
- Input signal
- Fixed at 3.3V for RX/TX and JTAG
- Length (mm)
- 68



















