Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Espressif, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type ESP32 Based; chip ESP32 chip; flash 8MB.

Key Highlights

  • Item Type: ESP32 Based
  • Chip: ESP32 chip
  • Flash: 8MB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeESP32 Based
ChipESP32 chip
Flash8MB
PSRAM2MB
ConnectivityBluetooth ,Wifi
Shipping Weight0.008 kg
Shipping Dimensions11 × 5 × 3 cm

Overview

The Espressif ESP32-PICO-DevKitM-2 Development board, made by Espressif, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: ESP32 Based
  • Chip: ESP32 chip
  • Flash: 8MB (space for firmware, files or media)
  • PSRAM: 2MB
  • Connectivity: Bluetooth ,Wifi (check your phone or controller supports the same Bluetooth version for full range)
  • Shipping Weight: 0.008 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 11 × 5 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

ESP32-PICO-DevKitM-2 is an ESP32-based development board produced by Espressif. The core of this board is ESP32-PICO-MINI-02(02U) module with complete Wi-Fi and Bluetooth functionalities. The development board features a USB-to-UART Bridge circuit which allows developers to connect the board to a computer’s USB port for flashing and debugging. All the IO signals and system power on ESP32-PICO-MINI-02(02U) are led out to two rows of 18 x 0.1” header pads on both sides of the development board for easy access. For compatibility with Dupont wires, all header pads are populated with two rows of male pin headers Note:-
  1. This pin is connected to the pin of the USB bridge chip on the board.
  2. 32.768 kHz crystal oscillator: a) input b) output
  3. The operating voltage of ESP32-PICO-DevKitM-2’s embedded SPI flash is 3.3 V. Therefore, the strapping pin MTDI should be pulled down during the module power-on reset. If connected, please make sure that this pin is not held up on reset.


Features:

  1. The complete ESP32 system on a chip (ESP32 SoC) has been integrated into the module
  2. Users can also select the board with ESP32-PICO-MINI-02U soldered
  3. V-to-3.3V Low dropout voltage regulator (LDO)
  4. CP2102N, single-chip USB-UART bridge that offers up to 3 Mbps transfers rates
  5. All the pins on ESP32-PICO-MINI-02 are broken out to pin headers
  6. You can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI
  7. USB-to-UART bridge: CP2102N, single-chip USB-UART bridge that offers up to 3 Mbps transfers rates
  8. Antenna: On board PCB antenna
  9. Some useful link

Package Includes:

1 x Espressif ESP32-PICO-DevKitM-2 Development board

Quick specs

Item Type
ESP32 Based
Chip
ESP32 chip
Flash
8MB
PSRAM
2MB
Connectivity
Bluetooth ,Wifi
Shipping Weight
0.008 kg
See all specifications