
1 / 7 · Click to enlarge
AI Summary
A stackable Arduino shield built on the Wiznet W5100 chip that adds a 10/100Mbps RJ-45 network port and a micro-SD card slot. It lets your sketches open up to four simultaneous socket connections for web serving and data exchange.
Key Highlights
- Wiznet W5100 chip with TCP and UDP network stack
- Standard RJ-45 port with integrated line transformer
- 10/100Mbps connection speed at 5V operating voltage
- Supports up to four simultaneous socket connections
- Onboard micro-SD slot for files served over the network
- Stackable long wire-wrap headers keep pin layout intact
Ideal For
- Arduino makers building networked sensor projects
- Students learning TCP and UDP communication
- Hobbyists creating small web servers on Arduino
- Developers needing wired network reliability
- Educators teaching embedded networking basics
Buying Tip
Check that your project can spare pin 4 for the micro-SD chip select and confirm your board uses the R3 1.0 pinout before stacking this shield.
Elecvora expert review
Our verdict
A dependable choice for anyone who needs a wired network link and simple file storage on an Arduino. The W5100 chip and official library support keep the software side familiar, while the stackable headers make it easy to combine with other shields.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Hardware TCP and UDP stack on the Wiznet W5100
- Four simultaneous socket connections
- Micro-SD slot for serving stored files
- Stackable pass-through headers
- Reset controller for reliable power-up
Cons
- Requires an Arduino board, which is not included
- Uses pin 4 for micro-SD chip select
- Wired connection only, no wireless
Best for
Arduino projects that need a stable wired network link and local file storage
Not ideal for
Projects that need wireless networking or have no free pin 4
Specifications
| Model No. / Name | Ethernet Shield |
|---|---|
| Compatibility | Arduino |
| Main Chip | Wiznet W5100 |
| Connection speed | 10/100Mbps |
| Operating Voltage (VDC) | 5 |
| Length (mm) | 73 |
| Width (mm) | 54 |
| Weight (g) | 27 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
What's in the box
- 1 x Ethernet W5100 R3 Ethernet & SD Shield
Frequently Asked Questions
What is this shield used for?
Which chip does the shield use?
What voltage does it need?
How is the micro-SD card accessed?
Is an Arduino board included?
Can I stack another shield on top?
Overview
This Ethernet shield gives an Arduino board a direct wired route onto a local network or the internet. The board is built around the Wiznet W5100 chip, which provides a network stack capable of both TCP and UDP, so sketches can act as a small web server, push sensor readings to another device or exchange messages across a network. The shield uses long wire-wrap headers that extend through the board, which keeps the Arduino pin layout intact and allows another shield to be stacked on top.
Key Features
- Wiznet W5100 ethernet chip with a built-in TCP and UDP network stack
- Standard RJ-45 connection with an integrated line transformer
- 10/100Mbps connection speed for wired networking
- Up to four simultaneous socket connections
- Onboard micro-SD card slot for storing files to serve over the network
- Stackable design with pass-through wire-wrap headers
- Reset controller to ensure the W5100 module resets properly on power-up
Specifications Explained
Main chip: The Wiznet W5100 handles the network stack in hardware, which keeps the load off the Arduino microcontroller and makes TCP and UDP communication straightforward through the Ethernet library.
Connection speed: The RJ-45 port runs at 10/100Mbps, matching common home and office network equipment. The integrated line transformer helps isolate the board from the cable side.
Socket support: Four simultaneous socket connections means the board can manage several network conversations at once, which is useful for serving pages while also sending or receiving data.
Operating voltage: The shield operates at 5VDC, matching the logic level of the Arduino boards it is designed for.
Size and weight: At 73mm long, 54mm wide and about 27g, the board follows a compact shield footprint that fits neatly on top of a board.
Compatibility and Requirements
The shield is designed for Arduino boards and is supported by the official Arduino Ethernet library for writing sketches that connect to the internet. The micro-SD reader is accessed through the SD library, where SS is on pin 4. The most recent revision exposes the 1.0 pinout on revision 3 of the Arduino UNO board. An Arduino board is required but not included.
Typical Uses
- Building a small web server that reports sensor data
- Serving stored files from a micro-SD card over a local network
- Sending measurements to a remote server or another networked device
- Learning how TCP and UDP communication works with Arduino
- Adding a stable wired connection to a project where wireless is unreliable
What's in the Box
1 x Ethernet W5100 R3 Ethernet & SD Shield.
Quick specs
- Model No. / Name
- Ethernet Shield
- Compatibility
- Arduino
- Main Chip
- Wiznet W5100
- Connection speed
- 10/100Mbps
- Operating Voltage (VDC)
- 5
- Length (mm)
- 73













