Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A white polyamide nylon replacement arm designed for the DJI F330 quadcopter frame, measuring 155 mm and weighing about 26 g. Pre-threaded brass sleeves make it quick to bolt onto the main frame after a crash.

Key Highlights

  • Direct replacement arm for the DJI F330 quadcopter frame
  • Made from polyamide nylon in a white finish
  • 155 mm long and 35 mm wide, about 26 g
  • Pre-threaded brass sleeves at the frame bolt points
  • 3 mm motor mount hole diameter
  • Lightweight spare that fits into a field repair kit

Ideal For

  • DJI F330 owners repairing a damaged arm after a crash
  • Multirotor hobbyists keeping spare frame parts in a field kit
  • Builders maintaining an F330 airframe for sport flying
  • Pilots who prefer to replace a single part rather than a whole frame

Buying Tip

Check that your motor screws suit the 3 mm motor mount hole and that your frame is an F330 before ordering, since no fixings or motor are included.

Elecvora expert review

Our verdict

A simple, direct-fit spare for the DJI F330 frame that makes crash repairs quick and inexpensive. The nylon build and brass sleeves are the right choices for a part that is expected to take impacts.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct replacement for the F330 frame
  • Pre-threaded brass sleeves simplify bolting
  • Lightweight at about 26 g
  • Low-cost way to extend frame life

Cons

  • Fixings and motor are not included
  • Only listed for the F330 frame
  • White finish may show dirt and scuffs

Best for

F330 owners who want a quick, low-cost arm replacement

Not ideal for

Pilots flying frames other than the F330

Specifications

Item TypeAccessory
Model No. / NameReplacement Arm
MaterialPolyamide Nylon
Weight (g)26
Length (mm)155
Width (mm)35
Compatible FrameF330
Motor Mount Hole Dia. (mm)3
Shipping Weight0.03 kg
Shipping Dimensions17 × 4 × 5 cm

What's in the box

  • 1 x Replacement Arm for DJI F330 Quadcopter

Frequently Asked Questions

Which frame does this arm fit?
It is listed as a replacement arm for the DJI F330 quadcopter frame. It is not stated as compatible with other frame models.
What material is the arm made from?
The arm is made from polyamide nylon and comes in white.
What size is the motor mount hole?
The motor mount hole diameter is 3 mm. Check your motor screws against this before installation.
Does the package include bolts or a motor?
No. The package contains one replacement arm only. Reuse your existing frame bolts and motor.
How much does the arm weigh?
The arm weighs about 26 g, with a shipping weight of 0.03 kg.
How do I care for the arm?
After each flight, check the arm for cracks or loose bolts, and replace it if it shows signs of damage.

Overview

Every multirotor takes knocks over its working life, and the arms are usually the first parts to suffer. This replacement arm is made for the DJI F330 quadcopter frame, so F330 owners can swap out a damaged arm instead of retiring the whole frame. It is produced in white polyamide nylon and matches the arm position and mounting layout of the F330 frame.

With a length of 155 mm, a width of 35 mm and a weight of about 26 g, it keeps the frame light while giving the motor a solid mounting point. Whether you are repairing after an incident or simply keeping a spare in your toolbox, this part is a practical item to have on hand.

Key Features

  • Replacement arm intended for the DJI F330 quadcopter frame
  • Polyamide nylon construction with a white finish
  • Pre-threaded brass sleeves at the frame bolt positions
  • 3 mm motor mount hole diameter
  • Compact size and low weight for easy storage and transport

Specifications Explained

Length and width

At 155 mm long and 35 mm wide, the arm provides a defined mounting area for the motor at the outer end and bolt points at the inner end. These dimensions correspond to the F330 frame layout, so the arm sits in the same position as the original.

Weight

At roughly 26 g, the arm adds little mass to the frame. That matters on a quadcopter, where weight at the ends of the arms affects balance and handling.

Material

Polyamide nylon is a tough, widely used material for frame components. It gives the arm a rigid but resilient structure that can absorb the kind of impact that occurs in an imperfect landing.

Motor mount hole

The 3 mm motor mount hole diameter is the size to check against your motor's mounting screws before installation.

Brass sleeves

Pre-threaded brass sleeves are set into the frame bolt positions. They provide durable threads so the arm can be bolted to the main frame and removed again when needed.

Compatibility and Requirements

This arm is listed for the F330 frame only. It is not stated as compatible with other frame sizes or models, so check your frame before ordering. The motor mount hole diameter is 3 mm. Fixings and motors are not included, so you will need your existing frame bolts and motor screws. Installation requires basic tools and a few minutes of work.

Typical Uses

This part is useful for replacing a cracked or bent arm after a crash, for refreshing a worn airframe, or for keeping a spare in your flight box so a damaged arm does not end your session. It is also a sensible item for anyone maintaining an F330 frame for sport flying or general multirotor use.

What's in the Box

  • 1 x Replacement Arm for DJI F330 Quadcopter

Quick specs

Item Type
Accessory
Model No. / Name
Replacement Arm
Material
Polyamide Nylon
Weight (g)
26
Length (mm)
155
Width (mm)
35
See all specifications