
1 / 3 · Click to enlarge
AI Summary
The F4 V3S Plus is a 36x36mm flight controller with STM32F405 MCU, Betaflight support, 2-6S LiPo input, 3A BEC, 9V pad, OSD, and microSD blackbox. Its fast processor and integrated features make it ideal for FPV racing drone builds.
Key Highlights
- STM32F405 MCU for fast, responsive flight control
- Betaflight firmware compatible for easy tuning
- Supports 2-6S LiPo batteries directly
- Two-way 3A BEC with dedicated 9V pad
- Integrated OSD for real-time flight data
- MicroSD blackbox and BMP280 barometer
Ideal For
- FPV racing pilots building 5-inch quads
- Freestyle drone enthusiasts upgrading their flight controller
- Makers and hobbyists assembling custom FPV drones
- Pilots who need integrated OSD and blackbox for tuning
Buying Tip
Check that your frame has 36x36mm mounting holes and that your receiver uses SBUS, PPM, DSMX, or Spektrum protocol to ensure compatibility.
Elecvora expert review
Our verdict
The F4 V3S Plus is a well-equipped flight controller for FPV racing drones, offering a fast STM32F405 processor, integrated OSD and blackbox, and flexible power options. It is a solid choice for pilots who need a reliable board with essential features.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fast STM32F405 MCU for responsive control
- Integrated OSD and microSD blackbox
- Dedicated 9V pad for accessories
- Supports 2-6S LiPo batteries
Cons
- Requires soldering for installation
- MicroSD card not included
- Limited documentation may require Betaflight knowledge
Best for
FPV racing and freestyle pilots building or upgrading 36x36mm drones
Not ideal for
Beginners who prefer plug-and-play solutions without soldering
Specifications
| Item Type | Flight Controller |
|---|---|
| MCU Type | STM32F405 |
| Firmware | Omnibus ~ f4 |
| Dimensions (L x W x H) mm | 36x36mm |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 6 × 4 × 3 cm |
What's in the box
- 1 x F4 V3S Plus Flight Control OSD 2-6S Two-way 3A BEC 9V Pad Design for Betaflight FPV Racing Drone
Frequently Asked Questions
What firmware does the F4 V3S Plus use?
What battery voltage does this flight controller support?
Does it have a built-in OSD?
What is the 9V pad for?
What receiver protocols are supported?
Is a microSD card included for the blackbox?
Overview
The F4 V3S Plus Flight Controller is a 36x36mm board designed for FPV racing drones. It is built around an STM32F405 microcontroller and runs Betaflight firmware, delivering fast processing for responsive flight characteristics. The board supports 2-6S LiPo batteries, has a two-way 3A BEC, and includes a dedicated 9V pad for powering accessories such as video transmitters or cameras. Integrated OSD, a microSD blackbox, and a BMP280 barometer add useful features for tuning and flight data logging.
Key Features
- STM32F405 MCU: Provides high-speed processing for smooth control and quick response.
- Betaflight Ready: Pre-configured for Betaflight, with OSD settings adjustable via the software.
- 2-6S LiPo Support: Works with a wide range of battery voltages, from 2S to 6S.
- Two-Way 3A BEC: Supplies stable power to connected devices.
- 9V Pad: Dedicated output for 9V accessories, simplifying wiring.
- Integrated OSD: Displays real-time flight data on your FPV feed.
- MicroSD Blackbox: Logs flight data for post-flight analysis and tuning.
- BMP280 Barometer: Enables altitude sensing for improved flight stability.
- Multiple Receiver Inputs: Supports SBUS, PPM, DSMX, and Spektrum protocols.
Specifications Explained
The STM32F405 MCU is a powerful 32-bit processor that handles flight control loops and peripheral management efficiently. The 36x36mm form factor is a common size for racing drone frames, allowing straightforward installation. The 2-6S LiPo compatibility means the board can be used with everything from small 2S setups to high-voltage 6S racing quads. The two-way 3A BEC provides up to 3 amps of current, sufficient for powering receivers, cameras, and other low-power accessories. The dedicated 9V pad offers a regulated 9V output, useful for devices that require higher voltage than the standard 5V. The integrated OSD overlays flight information onto the video feed, and the microSD blackbox records flight data for later review. The BMP280 barometer measures atmospheric pressure to provide altitude data.
Compatibility and Requirements
This flight controller is designed for Betaflight firmware and is compatible with SBUS, PPM, DSMX, and Spektrum receiver protocols. It requires a 2-6S LiPo battery and a suitable drone frame with 36x36mm mounting holes. A microSD card is needed to use the blackbox logging feature. The board includes on-board video filters for the 5V camera and VTX power outputs, helping to reduce interference.
Typical Uses
This flight controller is ideal for FPV racing drones and freestyle quadcopters where fast response and reliable performance are essential. It suits pilots who want a compact board with integrated OSD, blackbox, and barometer for tuning and data analysis. The 9V pad makes it convenient for powering compatible video transmitters or cameras without additional regulators.
What's in the Box
Package includes: 1 x F4 V3S Plus Flight Control OSD 2-6S Two-way 3A BEC 9V Pad Design for Betaflight FPV Racing Drone.


Quick specs
- Item Type
- Flight Controller
- MCU Type
- STM32F405
- Firmware
- Omnibus ~ f4
- Dimensions (L x W x H) mm
- 36x36mm
- Shipping Weight
- 0.015 kg
- Shipping Dimensions
- 6 × 4 × 3 cm













