Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Favorite LittleBee 30A-S OPTO is a 10g brushless ESC with BLHeli_S firmware, 30A continuous and 35A burst current, and 2-6S LiPo support. It delivers smooth, responsive throttle control for high-performance FPV drone builds.

Key Highlights

  • BLHeli_S firmware for smooth, responsive throttle
  • 30A continuous and 35A burst current handling
  • Supports 2-6S LiPo input (6-25.2V)
  • Lightweight 10g design with 35x17mm footprint
  • Silabs EFM8BB21F16 MCU running at 48MHz
  • OPTO design with no BEC for separate power

Ideal For

  • FPV freestyle pilots building 5-inch quads
  • Drone racers needing high current handling
  • Builders using 2205-2208 motors
  • Pilots experimenting with 5S or 6S batteries
  • Makers upgrading to BLHeli_S firmware

Buying Tip

Remember that this is an OPTO ESC with no BEC, so plan to power your flight controller separately.

Elecvora expert review

Our verdict

The Favorite LittleBee 30A-S OPTO offers solid performance for the price, with BLHeli_S firmware and high current handling in a lightweight package. It is a reliable choice for pilots who need a capable ESC without breaking the bank.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Smooth throttle response from BLHeli_S
  • High 30A continuous and 35A burst rating
  • Lightweight and compact
  • Wide 2-6S LiPo compatibility
  • Easy firmware flashing via pass-through

Cons

  • No BEC, requires separate power for flight controller
  • Requires soldering for installation
  • Copy version may lack original branding

Best for

FPV pilots building high-performance 5-inch quads

Not ideal for

Beginners who prefer plug-and-play ESCs with integrated BEC

Specifications

Item TypeBrushless ESC
Input Supply Support2 - 6S LiPo
Burst Current (A)35
BootloaderBLHeli S
Length (mm)35
Width (mm)17
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions4 × 2 × 2 cm

What's in the box

  • 1 x Favorite LittleBee 30A-S OPTO Electronic Speed Controller (Copy)

Frequently Asked Questions

What firmware does this ESC run?
It comes with BLHeli_S firmware, which supports Oneshot125, Oneshot42, Multishot, and dampened light mode.
Can I use this ESC with a 6S battery?
Yes, it supports 2-6S LiPo input (6-25.2V), so 6S is within the rated range.
Does this ESC have a BEC?
No, it is an OPTO ESC with no BEC, so you must power your flight controller and receiver separately.
What motors are recommended?
It is recommended for 2205-2208 motors with 5 or 6-inch tri-blade propellers.
Is this the original LittleBee ESC?
No, this is a copy version, clearly labeled as such, and it performs the same as the original.
Do I need to add capacitors?
Capacitors are recommended to smooth power delivery but are not required for operation.

Overview

The Favorite LittleBee 30A-S OPTO is a brushless electronic speed controller built for FPV drone pilots who need reliable power in a compact package. It uses a Silabs EFM8BB21F16 microcontroller running at 48MHz and a dedicated driver chip to deliver precise motor control. The ESC comes flashed with BLHeli_S firmware, which uses hardware-generated PWM for exceptionally smooth throttle response. This is a copy version, clearly marked as such, and performs the same as the original LittleBee ESC.

Key Features

  • BLHeli_S firmware: Supports Oneshot125, Oneshot42, Multishot, and Active Braking (dampened light mode) for flexible setup options.
  • High current capability: Handles 30A continuous and 35A burst, suitable for power-hungry motor and prop combinations.
  • Wide voltage range: Works with 2-6S LiPo batteries (6-25.2V), giving you flexibility across different build types.
  • Lightweight construction: Weighs only 10g and measures 35mm by 17mm, minimizing impact on your drone's weight and space.
  • OPTO design: No integrated BEC, so you power your flight controller and receiver separately, reducing electrical noise.
  • Quality PCB: Four-layer blind pole board with 3 oz copper for efficient current flow.

Specifications Explained

Current rating: The 30A continuous rating means the ESC can handle sustained current draws up to 30 amps, while the 35A burst rating covers short peaks. This makes it suitable for aggressive flying and high-thrust setups.

Voltage support: With 2-6S LiPo compatibility, you can use batteries from 2-cell to 6-cell. The recommended setups include 4S or 5S batteries, but the ESC is rated for up to 6S.

MCU and firmware: The Silabs EFM8BB21F16 at 48MHz provides fast processing, and BLHeli_S firmware is known for its smooth throttle linearity. The dedicated driver chip ensures clean motor signals.

Dimensions and weight: At 35mm x 17mm and 10g, this ESC is easy to fit into tight frames without adding noticeable weight.

Compatibility and Requirements

This ESC is compatible with all current flight controllers, including Naze, SPF3, and Revo F4. It supports one-wire pass-through flashing via Cleanflight when paired with a suitable flight controller. Recommended motor sizes are 2205-2208, with 5 or 6-inch tri-blade propellers. Because it is an OPTO ESC with no BEC, you will need a separate power source for your flight controller and receiver. Capacitors are recommended to smooth power delivery but are not required for operation.

Typical Uses

This ESC is ideal for high-performance FPV drones, including freestyle and racing builds. It suits experimental systems running 5S batteries or 6-inch tri-blade props. Whether you are building a new quad or upgrading an existing one, the LittleBee 30A-S provides the current handling and responsiveness needed for demanding flight.

What's in the Box

Package includes 1 x Favorite LittleBee 30A-S OPTO Electronic Speed Controller (Copy).

Quick specs

Item Type
Brushless ESC
Input Supply Support
2 - 6S LiPo
Burst Current (A)
35
Bootloader
BLHeli S
Length (mm)
35
Width (mm)
17
See all specifications