Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FIGARO, this air quality sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Air Quality Sensor; model no. / name TGS2602 B00; heater voltage 5.0±0.2V DC. Check that your power source supplies 5.0±0.2V DC before connecting it.

Key Highlights

  • Item Type: Air Quality Sensor
  • Model No. / Name: TGS2602 B00
  • Heater Voltage: 5.0±0.2V DC

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeAir Quality Sensor
Model No. / NameTGS2602 B00
Heater Voltage5.0±0.2V DC
Circuit Voltage5.0±0.2V DC
Heater power consumption280mW (typical)
Heater Current56±5mA
Sensing PrincipleMOS type
Heater Resistanceapprox 59Ω at room temp. (typical)
Load Resistancevariable 0.45kΩ min
Sensor Resistance10kΩ ~ 100kΩ in air
Standard PackageTO-5 metal can
Target GasesAir contaminants (VOCs, ammonia, H2S, etc.)
Test Gas Conditionsnormal air at 20±2˚C, 65±5%RH
Shipping Weight0.01 kg
Shipping Dimensions9 × 7 × 2 cm

Overview

The Figaro TGS2602 Air Quality / VOC Sensor, made by FIGARO, is listed in our air quality sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Air Quality Sensor
  • Model No. / Name: TGS2602 B00
  • Heater Voltage: 5.0±0.2V DC (match this to your power supply; too high a voltage can damage the part)
  • Circuit Voltage: 5.0±0.2V DC (match this to your power supply; too high a voltage can damage the part)
  • Heater power consumption: 280mW (typical)
  • Heater Current: 56±5mA (your supply must deliver at least this much current)
  • Sensing Principle: MOS type
  • Heater Resistance: approx 59Ω at room temp. (typical)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The sensing element comprises a metal oxide semiconductor layer formed on the alumina substrate of a sensing chip together with an integrated heater. In the presence of detectable gas, sensor conductivity increases depending on gas concentration in the air. A simple electrical circuit can convert the change in conductivity to an output signal which corresponds to the gas concentration. The TGS2602 has high sensitivity to low concentrations of odorous gases such as ammonia and H2S generated from waste materials in office and home environments. The sensor also has a high sensitivity to low concentrations of VOCs such as toluene emitted from wood finishing and construction products. Note: For more technical details go through Datasheet in the attachment section 

Features:

  1. High sensitivity to VOCs and odorous gases
  2. Low power consumption
  3.  High sensitivity to gaseous air contaminants
  4. Long life
  5.  It uses a simple electrical circuit
  6.  Small size

Package Includes:

1 x Figaro TGS2602 Air Quality / VOC Sensor

Quick specs

Item Type
Air Quality Sensor
Model No. / Name
TGS2602 B00
Heater Voltage
5.0±0.2V DC
Circuit Voltage
5.0±0.2V DC
Heater power consumption
280mW (typical)
Heater Current
56±5mA
See all specifications