Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FIGARO, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; model no. / name TGS2611 C00; sensing principle MOS type. Check that your power source supplies 5.0±0.2V DC before connecting it.

Key Highlights

  • Item Type: Gas Sensor
  • Model No. / Name: TGS2611 C00
  • Sensing Principle: MOS type

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeGas Sensor
Model No. / NameTGS2611 C00
Sensing PrincipleMOS type
Standard PackageTO-5 metal can
Target GasesMethane, Natural Gas
Heater Voltage5.0±0.2V DC
Circuit Voltage5.0±0.2V DC
Load Resistancevariable 0.45kΩ min.
Heater Resistanceapprox 59Ω at room temp.
Heater Current56±5mA
Heater power consumption280mW±25mW
Sensor Resistance0.68~6.8kΩ in 5000ppm methane
Test Gas ConditionsMethane in air at 20±2˚C, 65±5%RH
Shipping Weight0.01 kg
Shipping Dimensions9 × 7 × 2 cm

Overview

The Figaro TGS2611-C00 Methane Sensor, made by FIGARO, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Gas Sensor
  • Model No. / Name: TGS2611 C00
  • Sensing Principle: MOS type
  • Standard Package: TO-5 metal can
  • Target Gases: Methane, Natural Gas
  • Heater Voltage: 5.0±0.2V DC (match this to your power supply; too high a voltage can damage the part)
  • Circuit Voltage: 5.0±0.2V DC (match this to your power supply; too high a voltage can damage the part)
  • Load Resistance: variable 0.45kΩ min.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TGS2611-C00 is a semiconductor-type gas sensor that combines very high sensitivity to methane gas with low power consumption and long life. Due to the miniaturization of its sensing chip, TGS2611-C00 requires a heater current of only 56mA, and the device is housed in a standard TO-5 package. TGS2611-C00 possesses a small size and quick gas response, making it suitable for gas leakage checkers. The TGS2611-C00 is able to satisfy the requirements of performance standards such as UL1484 and EN50194. Note: For more technical details go through Datasheet in the attachment section

Features:

  1. Quick response
  2. Low power consumption
  3. Long life and low cost
  4.  Uses simple electrical circuit

Package Includes:

1 x Figaro TGS2611-C00 Methane Sensor

Quick specs

Item Type
Gas Sensor
Model No. / Name
TGS2611 C00
Sensing Principle
MOS type
Standard Package
TO-5 metal can
Target Gases
Methane, Natural Gas
Heater Voltage
5.0±0.2V DC
See all specifications