
1 / 2 · Click to enlarge
At a glance
Made by FirstRate, this water quality sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name FST100-DO202A; resolution 0.01mg/L; operating temperature (°c) 0~45℃.
Key Highlights
- Model No. / Name: FST100-DO202A
- Resolution: 0.01mg/L
- Operating Temperature (°C): 0~45℃
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | FST100-DO202A |
|---|---|
| Resolution | 0.01mg/L |
| Operating Temperature (°C) | 0~45℃ |
| Signal Output | RS485 |
| Cable Length | 5 |
| Power Consumption | 0.2W@12V |
| Shipping Weight | 0.625 kg |
| Shipping Dimensions | 32 × 15 × 10 cm |
Overview
The FirstRate FST100-DO202A Dissolved Oxygen Sensors, Range: 0~20mg/L, <0.2MPa, made by FirstRate, is listed in our water quality sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: FST100-DO202A
- Resolution: 0.01mg/L
- Operating Temperature (°C): 0~45℃
- Signal Output: RS485
- Cable Length: 5 (measure your mounting space before ordering)
- Power Consumption: 0.2W@12V
- Shipping Weight: 0.625 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 32 × 15 × 10 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The FST 100-DO202A Dissolved Oxygen Sensor is an integrated online fluorescence dissolved oxygen sensor designed based on the quenching principle of excited fluorescence by specific substances in physics. When the excitation light shines on the fluorescent substance on the surface of the fluorescent membrane head, the fluorescent substance is excited and emits fluorescence. The extinguishing time of the fluorescence is affected by the concentration of oxygen molecules on the surface of the fluorescent membrane head.
The concentration of oxygen molecules can be calculated by detecting the phase difference between fluorescence and excitation light and comparing it with the internal calibration curve, and outputs the final value after temperature and salinity compensation.
Package include:
1 x FirstRate FST100-DO202A Dissolved Oxygen Sensors, Range: 0~20mg/L, <0.2MPaQuick specs
- Model No. / Name
- FST100-DO202A
- Resolution
- 0.01mg/L
- Operating Temperature (°C)
- 0~45℃
- Signal Output
- RS485
- Cable Length
- 5
- Power Consumption
- 0.2W@12V



















