Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Flameback Tech ESC 45A is a 3-6S speed controller rated for 45A continuous and 50A burst, with DSHOT, Multishot, Oneshot and PWM support. Its IP56 housing and compact 19.55 g body make it a practical choice for weight-aware multirotor builds.

Key Highlights

  • 45A continuous and 50A burst current for demanding throttle inputs
  • Wide 3S to 6S LiPo input range covering 9.6 to 19.2 V
  • Supports PWM, Oneshot125/42, Multishot and DSHOT150/300/600
  • Full NMOS design with dedicated MOSFET driver for efficiency
  • Rubycon low ESR capacitor for stable, low-noise operation
  • IP56 rated against dust and splashes; 19.55 g lightweight body

Ideal For

  • FPV pilots building 3S to 6S multirotor quads
  • UAV builders needing a compact single-motor ESC
  • Makers upgrading to DSHOT-capable speed controllers
  • Outdoor flyers wanting IP56 dust and splash resistance
  • Weight-conscious builds where 19.55 g per ESC matters

Buying Tip

Check your motor's maximum current draw against the 45A continuous and 50A burst ratings before buying, and confirm your flight controller supports one of the listed protocols.

Elecvora expert review

Our verdict

The Flameback Tech ESC 45A covers the essentials well: a useful 45A continuous rating, a wide 3S to 6S input range and every mainstream throttle protocol in one small package. The IP56 rating and built-in protections add real peace of mind for outdoor multirotor work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Broad protocol support from PWM through DSHOT600
  • 45A continuous with 50A burst headroom
  • Compact 19.55 g body with IP56 protection
  • Rubycon low ESR capacitor and full NMOS design
  • Overcurrent, undervoltage, overvoltage and thermal protections

Cons

  • Sold as a single unit, so multirotors need several
  • Requires soldering and flight controller configuration
  • No programming tool, motor or battery included

Best for

FPV and UAV builders wanting a compact, protocol-flexible 3-6S ESC

Not ideal for

Plug-and-play users who do not want to solder or configure an ESC

Specifications

Item TypeElectronic Speed Controller
Voltage Rating (V)3s - 6s LiPo (9.6 - 19.2V)
Current Rating (A)45A (Cont.), 50A (Burst)
ProtocolPWM, Oneshot125, Oneshot42, Multishot, DSHOT150, DSHOT300, DSHOT600
Length (mm)45
Width (mm)27.5
Weight (g)19.55
Dimensions (L x W x H) mm45 x 27.5 x 10.85
Shipping Weight0.026 kg
Shipping Dimensions8 × 7 × 15 cm

What's in the box

  • 1 x Flameback Tech ESC 45A

Frequently Asked Questions

What battery voltage does this ESC accept?
It supports 3S to 6S LiPo packs, which corresponds to roughly 9.6 V to 19.2 V. Stay within that range to avoid damage.
Which throttle protocols can it run?
It supports PWM, Oneshot125, Oneshot42, Multishot, DSHOT150, DSHOT300 and DSHOT600. Choose the protocol your flight controller supports.
How much current can it handle?
The rating is 45A continuous with a 50A burst ceiling. Keep your motor's current draw within those figures.
Is it waterproof?
It carries an IP56 rating, meaning resistance to dust and splashes. It is not intended for submersion.
How many ESCs come in the package?
The pack contains one Flameback Tech ESC 45A. A quadcopter build therefore needs four separate units.
What protections are built in?
The ESC includes overcurrent, undervoltage, overvoltage and thermal shutdown protection. It operates from -20 °C to 125 °C with a peak ESC temperature up to 140 °C.

Overview

The Flameback Tech ESC 45A is a single electronic speed controller for brushless multirotor motors. It accepts 3S to 6S LiPo input and delivers 45A continuously with a 50A burst ceiling, giving you headroom for aggressive throttle punches without stepping up to a larger, heavier unit. The board measures 45 x 27.5 x 10.85 mm and weighs 19.55 g, so it suits frames where every gram is accounted for.

Key Features

  • Full NMOS design with a dedicated MOSFET driver for efficient switching
  • Rubycon low ESR capacitor to keep voltage ripple and noise low
  • Advanced MOSFET package for lower heat generation and consistent reliability
  • Broad protocol support: PWM, Oneshot125, Oneshot42, Multishot, DSHOT150, DSHOT300 and DSHOT600
  • IP56 rating for resistance to dust and splashes in harsh environments
  • Built-in protections: overcurrent, undervoltage, overvoltage and thermal shutdown

Specifications Explained

The 45A continuous rating is the current the ESC can carry during normal flight, while the 50A burst figure covers short spikes such as rapid throttle changes. The 3S to 6S LiPo range means the controller works across a broad spread of pack voltages, from 9.6 V up to 19.2 V, so you can match it to your chosen battery rather than buying a different ESC per setup.

Protocol support matters for how the ESC talks to your flight controller. PWM and the Oneshot and Multishot families suit a range of older and current flight stacks, while DSHOT150, DSHOT300 and DSHOT600 give you faster, digital throttle communication where your controller supports it. The operating temperature range of -20 °C to 125 °C, with peak ESC temperature up to 140 °C, describes the thermal envelope the hardware is designed around.

Compatibility and Requirements

Use this ESC with 3S to 6S LiPo batteries and a brushless motor whose current draw stays within the 45A continuous and 50A burst limits. Your flight controller must support one of the listed throttle protocols. Because this listing is for a single ESC, multi-motor builds need one unit per motor. Wiring, soldering and configuration are required; no flight controller, motor, battery or programming tool is included.

Typical Uses

This controller fits multirotor projects where a compact, protocol-flexible ESC is needed, including FPV builds, general UAV platforms and custom drone assemblies. The IP56 rating and thermal protections make it a reasonable pick for outdoor flying where dust and damp conditions are part of the day.

What's in the Box

  • 1 x Flameback Tech ESC 45A

Quick specs

Item Type
Electronic Speed Controller
Voltage Rating (V)
3s - 6s LiPo (9.6 - 19.2V)
Current Rating (A)
45A (Cont.), 50A (Burst)
Protocol
PWM, Oneshot125, Oneshot42, Multishot, DSHOT150, DSHOT300, DSHOT600
Length (mm)
45
Width (mm)
27.5
See all specifications