Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A USB simulator cable that links compatible FlySky transmitters to FMS and other unencrypted sim software on a PC. It carries a 4-8 channel PPM signal over USB HID, so you can practise on screen with your own radio.

Key Highlights

  • USB HID 1.1 device recognised by the PC as a controller
  • Accepts 4-8 channel PPM input from the transmitter
  • 1.5 m cable for flexible desk or sofa placement
  • Compact 12 x 47 x 20 mm adapter body
  • For FMS and other unencrypted simulator software
  • Includes large round patch cord and small round adapter

Ideal For

  • Beginners learning RC orientation and stick control
  • FlySky FS-i6 and FS-i4 owners wanting simulator practice
  • Pilots rehearsing new manoeuvres before flying a real model
  • Hobbyists checking transmitter channel output on a PC

Buying Tip

Confirm your transmitter can output a PPM signal and that your simulator software is unencrypted and runs on a supported Windows version before ordering.

Elecvora expert review

Our verdict

A simple, low-cost way for FlySky owners to turn an existing transmitter into a simulator controller. It does one job without fuss, provided your radio outputs PPM and your simulator is unencrypted and runs on a supported Windows version.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • No special driver needed thanks to USB HID 1.1
  • Works with a wide list of FlySky transmitter models
  • 1.5 m cable gives comfortable reach
  • Compact adapter body is easy to store

Cons

  • FMS software is not compatible with Windows 10
  • Only works with unencrypted simulation software
  • Requires the transmitter to output a PPM signal

Best for

FlySky transmitter owners practising on a PC simulator

Not ideal for

Pilots using encrypted simulator software or Windows 10 with FMS

Specifications

Item TypeOther Accessories
Model No. / NameFS-SM100
SupportedUSB HID1.1
Input signal4-8 CH PPM
Cable Length1.5 meter
Dimensions (L x W x H) mm12*47*20mm
Weight (g)14(Cable and connector not included)
Shipping Weight0.04 kg
Shipping Dimensions21 × 11 × 2 cm

What's in the box

  • 1 x aeromodelling USB analogue cable
  • 1 x large round patch cord
  • 1 x small round adapter cable

Frequently Asked Questions

Which transmitters does this cable work with?
It is intended for FlySky transmitters including the FS-i6, FS-i4, FS-TH9X, FS-T6, FS-T4B and FS-GT3. Your transmitter must be able to output a 4-8 channel PPM signal.
Do I need to install a driver?
The adapter uses USB HID 1.1, so the computer recognises it as a standard input device. You then select and calibrate it inside your simulator software.
Which simulator software can I use?
It works with unencrypted simulation software only. Note that FMS software is not compatible with Windows 10; the reference information lists Windows 7 and XP as supported systems.
How long is the cable?
The cable is 1.5 m long, which gives enough reach from a desktop or laptop to your seating position.
What is included with the cable?
You receive the aeromodelling USB analogue cable, a large round patch cord and a small round adapter cable.
How should I store and care for it?
Coil the cable loosely rather than bending it sharply at the connector, and keep the adapter dry and away from strain when plugged in.

Overview

The FlySky FS-SM100 is a purpose-built USB simulator cable for FlySky transmitters. Instead of flying a real model to build muscle memory, you plug your radio into a computer and practise in simulator software. The adapter takes the PPM signal from the transmitter, converts it, and presents the sticks and switches to the PC as a standard USB HID 1.1 controller.

Because the radio is seen as an ordinary game controller, there is no complicated driver setup. The cable is 1.5 m long, which is enough to keep the transmitter comfortably in your hands while the PC sits on or under the desk.

Key Features

  • USB HID 1.1 output: the PC recognises the cable as an input device.
  • 4-8 channel PPM input: works with transmitters outputting a PPM signal in that range.
  • 1.5 m cable: practical length for desk, laptop or living-room use.
  • Compact adapter: the 12 x 47 x 20 mm body stays out of the way.
  • Simulator focused: intended for FMS and other unencrypted simulation software.
  • Adapter set included: comes with a large round patch cord and a small round adapter cable.

Specifications Explained

USB HID 1.1 is the standard class for keyboards, mice and game controllers. Using it means the simulator cable does not need a special driver on a supported system; the operating system handles it as a generic input device.

4-8 channel PPM input describes the signal the adapter expects from the transmitter. A PPM stream carries several channels in one wire, and this cable is built for radios sending between four and eight channels that way. Check that your transmitter can output PPM before buying.

1.5 m cable length is a practical middle ground: long enough to reach from a tower PC or laptop to your seating position, short enough to avoid a tangle.

Size and weight are modest at 12 x 47 x 20 mm and 14 g for the adapter, so it adds almost nothing to a transmitter bag.

Compatibility and Requirements

The cable is intended for FlySky transmitters including the FS-i6, FS-i4, FS-TH9X, FS-T6, FS-T4B and FS-GT3. It works with unencrypted simulation software only, and FMS software is not compatible with Windows 10; the reference information lists Windows 7 and XP as working systems. Confirm your simulator and operating system before ordering.

Typical Uses

Use it to learn basic orientation, practise hovering and figure-eights, or rehearse a new manoeuvre before trying it with a real model. It is also handy for checking that a transmitter's sticks and channels behave as expected without powering up an aircraft.

What's in the Box

  • 1 x aeromodelling USB analogue cable
  • 1 x large round patch cord
  • 1 x small round adapter cable

Quick specs

Item Type
Other Accessories
Model No. / Name
FS-SM100
Supported
USB HID1.1
Input signal
4-8 CH PPM
Cable Length
1.5 meter
Dimensions (L x W x H) mm
12*47*20mm
See all specifications