Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1.3 g full-range FrSky receiver with ACCESS and ACCST D16 support, telemetry and OTA updates. Its SBUS In port lets it serve as a redundancy receiver for safer long-range builds.

Key Highlights

  • Tiny 16 x 11 mm body weighs just 1.3 g
  • Works with all FrSky ACCESS and ACCST D16 transmitters
  • Full-range control with at least 2 km range and matching telemetry
  • S.Port, F.Port and FBUS output switchable via S.Port
  • SBUS In port supports signal redundancy with a second receiver
  • Over-the-air firmware updates in ACCESS mode

Ideal For

  • FPV pilots building lightweight long-range quads
  • Fixed-wing and glider pilots wanting full-range telemetry
  • RC hobbyists adding a redundancy receiver to a larger model
  • Builders who need a very small receiver for tight frames
  • FrSky users upgrading to the Archer Plus series

Buying Tip

Check that your transmitter runs ACCESS or ACCST D16 firmware before buying, since the RS will not bind to other FrSky protocols.

Elecvora expert review

Our verdict

The Archer Plus RS packs full-range control, telemetry and redundancy support into a receiver small enough for almost any build. It is a practical choice for FrSky pilots who want capability without weight.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Extremely light at 1.3 g
  • ACCESS and ACCST D16 support with automatic protocol matching
  • SBUS In redundancy option
  • OTA firmware updates in ACCESS mode
  • Configurable S.Port, F.Port and FBUS output

Cons

  • Only compatible with FrSky ACCESS and ACCST D16 transmitters
  • Configuration options such as telemetry power require ACCESS mode
  • Tiny size means care is needed when handling and mounting

Best for

Weight-sensitive FPV and long-range builds on FrSky radios

Not ideal for

Pilots using transmitters outside the FrSky ACCESS or ACCST D16 ecosystem

Specifications

Item TypeReceiver
Operating Voltage (V)3.5V to 10V
Operating Current (mA)60mA at 5V
Antenna Connector TypeIPEX4
CompatibilityAll FrSky ACCESS/ACCST D16 transmitters.
Dimensions (L x W x H) mm16 (L) x 11 (W)
Weight (g)1.3g
Shipping Weight0.01 kg
Shipping Dimensions13 × 9 × 1 cm

What's in the box

  • 1 x FrSky Archer Plus RS Receiver

Frequently Asked Questions

Which transmitters does the Archer Plus RS work with?
It is compatible with all FrSky ACCESS and ACCST D16 transmitters. The RF protocol is matched automatically during binding.
What voltage can the receiver take?
The operating voltage range is 3.5 V to 10 V, with a current draw of about 60 mA at 5 V.
How far can it fly?
The RS provides full-range control with a range of at least 2 km and equivalent telemetry range. Actual range varies with local conditions.
Can it be used as a redundancy receiver?
Yes. The SBUS In port lets it work alongside another FrSky ACCESS capable receiver with an SBUS port, and the best available signal is used.
What is included in the box?
The package contains one FrSky Archer Plus RS Receiver.
How are firmware updates done?
In ACCESS mode the receiver supports over-the-air firmware updates, so no cable is needed for the update itself.

Overview

The FrSky Archer Plus RS is a full-range receiver designed for builds where every gram matters. At roughly 16 x 11 mm and only 1.3 g, it fits into compact frames and tight electronics layouts while still delivering solid control and telemetry links. It is part of the Archer Plus family, which adds enhanced resistance to RF interference on top of the existing protection against interference from spark ignition systems.

The RS pairs with any FrSky ACCESS or ACCST D16 transmitter. During binding, the receiver matches the RF protocol automatically, so you do not need to choose a mode manually. In ACCESS mode you also gain over-the-air firmware updates, configurable telemetry power and switchable output options.

Key Features

  • Tiny, lightweight form factor for weight-sensitive builds
  • ACCESS and ACCST D16 compatibility with automatic protocol matching at bind
  • Full-range control with at least 2 km range and equivalent telemetry range
  • S.Port, F.Port or FBUS output, configurable via S.Port
  • Inverted S.Port for simple connection to flight controllers
  • SBUS Out in 16-channel or 24-channel mode
  • SBUS In for signal redundancy with a second FrSky ACCESS receiver
  • Over-the-air firmware updates in ACCESS mode

Specifications Explained

Operating voltage of 3.5 V to 10 V gives the receiver flexibility across common model power setups. Current draw is about 60 mA at 5 V, which is modest for a full-range receiver. The IPEX4 antenna connectors accept the supplied detachable antennas and allow replacement if an antenna is damaged. Two antennas help maintain reception in different orientations. The small 16 x 11 mm footprint and 1.3 g weight are the headline figures for pilots counting grams.

Compatibility and Requirements

The Archer Plus RS works with all FrSky ACCESS and ACCST D16 transmitters. Redundancy use requires a second FrSky ACCESS capable receiver that has an SBUS port. Configuration of telemetry power and output type is done through S.Port. ACCESS mode is needed for over-the-air firmware updates.

Typical Uses

This receiver suits small FPV quads, long-range fixed-wing models, gliders and other RC builds where low weight and reliable telemetry matter. Its SBUS In redundancy option is useful on larger or more expensive aircraft where a second receiver path adds confidence.

What's in the Box

  • 1 x FrSky Archer Plus RS Receiver

Quick specs

Item Type
Receiver
Operating Voltage (V)
3.5V to 10V
Operating Current (mA)
60mA at 5V
Antenna Connector Type
IPEX4
Compatibility
All FrSky ACCESS/ACCST D16 transmitters.
Dimensions (L x W x H) mm
16 (L) x 11 (W)
See all specifications