
1 / 4 · Click to enlarge
AI Summary
The FrSky FAS100 ADV is an inline sensor that measures current up to 100A and battery voltage up to 14S. It supports FBUS and S.Port for straightforward telemetry on compatible FrSky receivers.
Key Highlights
- Measures current up to 100A and voltage up to 14S
- Supports FBUS protocol and remains S.Port compatible
- Installs inline between battery and ESC
- XT90 anti-spark connector included in the assembly
- Low current draw of about 16mA at 5V
- Pairs with receivers offering Smart Port and FBUS
Ideal For
- FPV pilots monitoring current draw on high-power multirotors
- Fixed-wing builders using FrSky Smart Port or FBUS receivers
- RC hobbyists setting up telemetry on 14S-capable power systems
- Pilots who want to track pack voltage and current in flight
Buying Tip
Check that your receiver supports FrSky Smart Port or FBUS before buying, since the sensor needs one of those protocols to report data.
Elecvora expert review
Our verdict
The FrSky FAS100 ADV is a practical inline sensor for pilots who want current and voltage telemetry without a complex setup. Its dual FBUS and S.Port support makes it easy to fit into both new and existing FrSky builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports both FBUS and S.Port
- Handles up to 100A and 14S
- Includes XT90 anti-spark connector
- Low 16mA current draw
Cons
- Requires a compatible FrSky receiver
- Inline installation needs wiring work
- No display or logging included on its own
Best for
Pilots using FrSky Smart Port or FBUS receivers who want inline current and voltage telemetry.
Not ideal for
Builds without a compatible FrSky telemetry receiver.
Specifications
| Item Type | Current Sensor |
|---|---|
| Measurement Input | 0-100A |
| Current consumption | 16mA@5V |
| Battery Voltage (V) | 14S |
| Compatibility | Receivers with FrSky Smart Port & FBUS function XT90 Anti-Spark Connector |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 13 × 9 × 4 cm |
What's in the box
- 1 x FrSky FAS100 ADV Smart Port and FBUS 100A Capable Current Sensor
Frequently Asked Questions
What does the FrSky FAS100 ADV measure?
Which receivers work with this sensor?
Does it support FBUS and S.Port?
How much current does the sensor draw?
What connector is included?
What is included in the package?
Overview
The FrSky FAS100 ADV is a current and voltage sensor built for electric RC models that need accurate power telemetry. It sits inline between the battery and the ESC, measuring the current flowing to the power system and the pack voltage at the same time. With a measurement input of 0-100A and support for batteries up to 14S, it covers a wide range of multirotor, fixed-wing and other high-current builds.
As part of the FrSky ADV series, this sensor fully supports the FBUS protocol while staying compatible with S.Port. That gives builders flexibility: use FBUS with a capable receiver for a simpler setup, or connect through S.Port on existing equipment.
Key Features
- Inline current measurement up to 100A
- Battery voltage monitoring up to 14S
- Full FBUS protocol support with S.Port compatibility
- XT90 anti-spark connector included
- Low current consumption of 16mA at 5V
- Compact, lightweight sensor module for RC builds
Specifications Explained
Current range
The 0-100A input lets you monitor the real draw of your power system, so you can check whether your setup is running within sensible limits and compare measured values with your expectations.
Voltage range
Support for up to 14S means the sensor can be used with high-voltage packs. Watching pack voltage in flight helps you track remaining capacity and avoid over-discharging.
Power consumption
At about 16mA at 5V, the sensor adds very little load to your model's electronics.
Connector
The included XT90 anti-spark connector helps reduce the spark that can occur when connecting high-voltage packs.
Compatibility and Requirements
The FAS100 ADV works with receivers that support FrSky Smart Port and FBUS functions. Because it supports both protocols, you can use FBUS with a compatible receiver or fall back to S.Port. The sensor is designed to be connected between the battery and ESC, and the XT90 anti-spark connector is part of the assembly.
Typical Uses
- FPV multirotors where current and voltage telemetry help manage flight time
- Fixed-wing electric models with high-current power systems
- Builds using FrSky receivers with Smart Port or FBUS
- Pilots who want to log or display real power data during flights
What's in the Box
1 x FrSky FAS100 ADV Smart Port and FBUS 100A Capable Current Sensor.
Quick specs
- Item Type
- Current Sensor
- Measurement Input
- 0-100A
- Current consumption
- 16mA@5V
- Battery Voltage (V)
- 14S
- Compatibility
- Receivers with FrSky Smart Port & FBUS function XT90 Anti-Spark Connector
- Shipping Weight
- 0.02 kg


















