Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The YHDC SCT010 is a split core current transformer that measures AC current up to 50A and outputs a proportional 50mA signal. Its clamp-on design lets you install it around existing wiring without disconnection, making current monitoring quick and non-invasive.

Key Highlights

  • Split core design for non-invasive installation around live conductors
  • 50A input to 50mA output ratio for safe, isolated measurement
  • Ferrite core ensures stable performance from 50Hz to 1KHz
  • 10mm aperture fits cables up to 10mm diameter
  • 40cm cable length for flexible routing to measurement equipment
  • Rated for phase voltages up to 720V and temperatures -25°C to +60°C

Ideal For

  • Electrical engineers designing current monitoring systems
  • HVAC technicians monitoring compressor currents
  • DIY enthusiasts building energy monitors
  • Industrial maintenance teams for motor protection
  • Facility managers tracking lighting circuit loads

Buying Tip

Verify that your measurement device accepts a 50mA current input and that the conductor diameter does not exceed 10mm before ordering.

Elecvora expert review

Our verdict

The YHDC SCT010 is a practical, no-fuss current transformer for non-invasive AC current sensing. Its split core design and standard 50A:50mA ratio make it a versatile choice for monitoring and protection tasks.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Split core allows installation without disconnecting wires
  • Compact and lightweight for easy mounting
  • Wide operating temperature range
  • Ferrite core for stable performance

Cons

  • Requires a compatible measuring device with current input
  • Not suitable for DC current measurement
  • Limited to 50A maximum primary current

Best for

AC current monitoring in motors, lighting, and compressors

Not ideal for

DC current sensing or applications requiring higher current ratings

Specifications

Item TypeCurrent Sensor
Model No. / NameCurrent Transformer
Core MaterialFerrite
Operating VoltagePhase voltage≤720V
Operating Temperature (°C)-25℃~+60℃
Storage Temperature (°C)-30℃~+90℃
Frequency50Hz~1KHz
InputBare conductor
Cable Length40 cm
Output50A: 50mA
Whole Diameter(mm)10
Dimensions (L x W x H) mm23 x 25 x 40
Weight (g)35g
Shipping Weight0.05 kg
Shipping Dimensions6 × 4 × 2 cm

What's in the box

  • 1 x YHDC SCT010 50A:50mA Split Core Current Transformer

Frequently Asked Questions

Can I use this sensor with a microcontroller like Arduino?
Yes, but you will need a burden resistor to convert the 50mA output to a voltage that the microcontroller's ADC can read. Alternatively, use a dedicated current sensor module.
What is the maximum voltage this transformer can handle?
The SCT010 is rated for phase voltages up to 720V. Ensure your system voltage does not exceed this limit.
Does it work with DC current?
No, this is an AC current transformer and only measures alternating current within the 50Hz to 1KHz range.
What is included in the package?
The package includes one YHDC SCT010 50A:50mA split core current transformer with a 40cm cable.
How do I clean and maintain the sensor?
Wipe the housing with a dry cloth. Avoid using solvents or immersing in water. Keep the core mating surfaces clean for accurate readings.
What is the aperture size and maximum conductor diameter?
The whole diameter is 10mm, so it fits bare conductors up to 10mm in diameter.

Overview

The YHDC SCT010 is a split core current transformer built for accurate, non-intrusive AC current sensing. It clamps around a single conductor and produces a scaled-down current output, making it an essential component for monitoring, protection, and control systems. The split core mechanism means you can install it without cutting or disconnecting the wire, saving time and reducing downtime.

Key Features

  • Split core convenience: The hinged core opens to fit around existing cables, so no rewiring is needed.
  • 50A to 50mA ratio: Provides a safe, low-level output proportional to the primary current for easy interfacing with meters or controllers.
  • Ferrite core: Offers stable magnetic properties across the 50Hz to 1KHz frequency range.
  • 10mm aperture: Accommodates bare conductors up to 10mm in diameter.
  • 40cm cable: Gives you enough length to reach your measurement device.
  • Wide voltage tolerance: Suitable for phase voltages up to 720V.

Specifications Explained

Input and output: The transformer accepts a primary current of up to 50A and delivers a secondary current of 50mA. This ratio allows you to calculate the primary current by multiplying the output by 1000. The low output current is safe to handle and compatible with many data loggers and protection relays.

Core material: The ferrite core provides good sensitivity and linearity over the specified frequency range, which covers typical mains frequencies and some harmonics.

Operating environment: With an operating temperature range of -25°C to +60°C and storage from -30°C to +90°C, the sensor is suitable for indoor and sheltered outdoor use in most climates.

Mechanical: The compact housing measures 23 x 25 x 40 mm and weighs only 35g, so it is easy to mount in tight spaces. The 10mm whole diameter refers to the opening for the conductor.

Compatibility and Requirements

The SCT010 is designed for use with bare conductors and requires a measuring or protection device that accepts a 50mA current input. It is compatible with systems operating at phase voltages up to 720V and frequencies between 50Hz and 1KHz. No additional power supply is needed for the transformer itself; it derives its signal from the conductor being measured.

Typical Uses

  • Current monitoring in AC motor circuits
  • Lighting equipment current sensing
  • Air compressor protection and monitoring
  • Energy management systems
  • DIY Arduino or Raspberry Pi current sensing projects

What's in the Box

1 x YHDC SCT010 50A:50mA Split Core Current Transformer

Quick specs

Item Type
Current Sensor
Model No. / Name
Current Transformer
Core Material
Ferrite
Operating Voltage
Phase voltage≤720V
Operating Temperature (°C)
-25℃~+60℃
Storage Temperature (°C)
-30℃~+90℃
See all specifications