
1 / 6 · Click to enlarge
AI Summary
A clamp-on split core current transformer that steps 200A of AC line current down to a 100mA signal. The hinged ferrite core fits over existing conductors without breaking the circuit.
Key Highlights
- Split core design clamps over existing conductors without rewiring
- 200A input scaled to a 100mA output signal
- 15 mm opening fits common insulated conductors
- Ferrite core for stable AC current transformation
- 40 cm cable for flexible routing to meters or relays
- Rated for phase voltages up to 720V and 50Hz to 1KHz
Ideal For
- Electricians installing panel-mounted current monitoring
- Energy monitoring hobbyists building AC load sensors
- Maintenance teams servicing motors and compressors
- Panel builders adding non-invasive current sensing
- Students learning about current transformers and AC measurement
Buying Tip
Confirm that the conductor plus its insulation fits through the 15 mm opening, and check that your measuring device accepts a 200A:100mA current transformer input before ordering.
Elecvora expert review
Our verdict
A tidy, no-fuss split core transformer for anyone who needs to sense AC current without breaking into existing wiring. The fixed 200A:100mA ratio and 15 mm opening cover a lot of everyday panel and motor work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clamp-on fitting avoids disconnecting conductors
- Clear fixed 200A:100mA ratio
- Ferrite core with a 50Hz to 1KHz range
- Compact 29 x 30 x 46 mm housing
- 40 cm lead simplifies routing
Cons
- Opening is only 15 mm, so large cables will not fit
- Output is a current signal, not a voltage output
- No mounting hardware or documentation specified
Best for
Non-invasive AC current monitoring on motors, lighting and compressors
Not ideal for
Applications needing a voltage output or conductors larger than the 15 mm opening
Specifications
| Item Type | Current Sensor |
|---|---|
| Model No. / Name | Current Transformer |
| Core Material | Ferrite |
| Operating Voltage | Phase voltage≤720V |
| Operating Temperature (°C) | -25℃~+60℃ |
| Storage Temperature (°C) | -30℃~+90℃ |
| Frequency | 50Hz~1KHz |
| Input | Bare conductor |
| Cable Length | 40 cm |
| Output | 200A:100mA |
| Whole Diameter(mm) | 15 |
| Dimensions (L x W x H) mm | 29 x 30 x 46 |
| Weight (g) | 85g |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 8 × 7 × 6 cm |
What's in the box
- 1 x YHDC SCT016S 200A:100mA Split Core Current Transformer with 40 cm cable
Frequently Asked Questions
What does the 200A:100mA rating mean?
Can I install it without cutting the cable?
What voltage can it be used on?
What frequency range does it support?
What comes with the product?
How should I store it when not in use?
Overview
The YHDC SCT016S is a split core current transformer built for non-invasive AC current sensing. Instead of threading a cable through a closed ring, you open the ferrite core, place it around a bare conductor and close it again. That makes it a practical choice when the wiring is already installed and you would rather not disconnect anything.
The transformer takes a primary current of up to 200A and delivers a proportional 100mA secondary output, which can be fed to a measuring instrument, monitoring module or protection circuit. The compact housing measures 29 x 30 x 46 mm and weighs about 85 g.
Key Features
- Clamp-on installation: the split core opens around an existing conductor, so no cable cutting is needed.
- 200A to 100mA ratio: a clear, fixed transformation ratio for AC current measurement.
- 15 mm opening: sized for typical insulated conductors used in distribution and control panels.
- Ferrite core: chosen for consistent performance across the 50Hz to 1KHz range.
- 40 cm lead: enough length to route the secondary wiring to a terminal block or meter.
- Wide voltage headroom: suitable for phase voltages up to 720V.
Specifications Explained
Ratio and output
The 200A:100mA marking means that when 200A flows through the primary conductor, the secondary lead delivers 100mA. The output is proportional, so a lower primary current produces a correspondingly lower secondary current. Plan your measuring circuit around this ratio.
Opening and dimensions
The 15 mm whole diameter is the internal opening of the core. Check that your conductor, including insulation, passes through comfortably. The body is 29 x 30 x 46 mm, which keeps it compact enough for crowded enclosures.
Frequency and temperature
The specified operating range is 50Hz to 1KHz, covering standard mains frequencies and some higher-frequency AC work. Operating temperature is -25°C to +60°C, with storage from -30°C to +90°C.
Compatibility and Requirements
The primary input is a bare conductor passing through the core opening, and the phase voltage must not exceed 720V. The secondary output is a current signal, so the device it connects to must be designed to accept a 200A:100mA current transformer input. The 40 cm cable terminates the secondary side.
Typical Uses
- Current monitoring and protection on AC motors
- Load measurement on lighting equipment
- Current sensing for air compressors
- Sub-metering and energy monitoring projects
- Retrofit installations where wiring cannot be interrupted
What's in the Box
One YHDC SCT016S split core current transformer with its attached 40 cm cable.
Quick specs
- Item Type
- Current Sensor
- Model No. / Name
- Current Transformer
- Core Material
- Ferrite
- Operating Voltage
- Phase voltage≤720V
- Operating Temperature (°C)
- -25℃~+60℃
- Storage Temperature (°C)
- -30℃~+90℃


















