Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A three-channel INA3221 current and bus voltage monitor on a compact purple breakout board with an I2C interface. It lets one microcontroller track shunt and bus voltages across three separate rails, with programmable averaging and alert outputs.

Key Highlights

  • Three-channel high-side current and bus voltage monitoring
  • I2C interface with four programmable addresses
  • Bus voltage sensing range of 0 V to 26 V
  • Single 2.7 V to 5.5 V supply, 350 µA typical draw
  • Programmable conversion times, averaging and alert outputs
  • Compact 38 x 31.8 x 2 mm board with header pin included

Ideal For

  • Electronics developers monitoring multiple supply rails
  • Test bench and lab users measuring current and voltage
  • Power supply and battery charger designers
  • Embedded engineers working with I2C sensor networks
  • Makers building multi-rail diagnostic tools

Buying Tip

Check that you have a suitable shunt resistor for each channel and confirm your host board's I2C voltage before wiring the module in.

Elecvora expert review

Our verdict

A tidy, well-focused breakout that puts three current and voltage monitoring channels on one I2C address space. It suits developers who need multi-rail data without stacking separate sensors.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three monitoring channels on a single board
  • Wide 0 V to 26 V bus range
  • Four selectable I2C addresses
  • Alert outputs per channel
  • Compact 38 x 31.8 x 2 mm footprint

Cons

  • Requires external shunt resistors
  • Soldering and I2C configuration needed
  • No enclosure or mounting hardware included

Best for

Multi-rail current and voltage monitoring in embedded and bench projects

Not ideal for

Plug-and-play users who want a ready-made display meter

Specifications

Shipping Weight0.010 kg
Shipping Dimensions5 × 5 × 1 cm

What's in the box

  • 1 x MCU-3221 INA3221 Power Monitoring Control Module Purple
  • 1 x Header Pin

Frequently Asked Questions

How many channels does this module monitor?
It monitors three channels, each reporting shunt voltage drop and bus supply voltage.
What supply voltage does the board need?
The module runs from a single 2.7 V to 5.5 V supply and draws about 350 µA typical.
What bus voltage can it measure?
It senses current on buses from 0 V to 26 V.
Can I use more than one module on the same I2C bus?
Yes, the I2C interface offers four programmable addresses, so multiple modules can share a bus.
What is included with the product?
You receive one MCU-3221 INA3221 power monitoring control module in purple and one header pin.
Do I need extra components to measure current?
Yes, a shunt resistor is needed in the current path for each channel you want to measure.

Overview

The MCU-3221 is a small purple breakout board carrying the INA3221, a three-channel monitor that measures both shunt voltage drop and bus supply voltage on high-side rails. Instead of wiring three separate sensors, you connect your shunt resistors and load lines to one board and read all channels over a shared I2C bus. That makes it a practical building block for power management work, bench testing and any project where several supply rails need watching at once.

Key Features

  • Monitors shunt voltage and bus voltage on three independent channels
  • I2C interface with four programmable addresses, so several boards can share a bus
  • Programmable conversion times and averaging options to balance speed and stability
  • Critical and warning alert outputs for out-of-range conditions on each channel
  • Bus voltage range of 0 V to 26 V and a 2.7 V to 5.5 V supply

Specifications Explained

Bus voltage, 0 V to 26 V: the board can sit on rails from near zero up to 26 V, covering common low-voltage electronics as well as higher rails within that window.

Supply, 2.7 V to 5.5 V: the module is powered separately from the bus it measures, so it works comfortably with 3.3 V and 5 V logic systems. Typical supply current is 350 µA.

Accuracy figures: offset voltage is ±80 µV maximum and gain error is 0.25% maximum, giving you a clear expectation of measurement quality.

Temperature range, -40°C to +125°C: the device is specified across a wide operating range, which suits enclosed equipment and varied environments.

Board size, 38 x 31.8 x 2 mm: thin enough to fit into tight enclosures and small project boxes.

Compatibility and Requirements

You need a host microcontroller with an I2C bus and a suitable shunt resistor for each channel you want to measure. The board is powered from 2.7 V to 5.5 V, and the measured bus may range from 0 V to 26 V. Four selectable I2C addresses allow multiple modules on one bus.

Typical Uses

  • Power management and multi-rail monitoring in embedded projects
  • Telecom equipment and power supply evaluation
  • Battery charger and test equipment measurements
  • Bench diagnostics where several rails are checked together

What's in the Box

One MCU-3221 INA3221 power monitoring control module in purple, plus one header pin.

Quick specs

Shipping Weight
0.010 kg
Shipping Dimensions
5 × 5 × 1 cm
See all specifications