Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This ir and rf transmitters and receivers is a good fit for makers, students and electronics hobbyists. Main specs: item type RF Module; operating frequency (mhz) 433; rated voltage (vdc) 5. Check that your power source supplies 5 before connecting it.

Key Highlights

  • Item Type: RF Module
  • Operating Frequency (MHz): 433
  • Rated Voltage (VDC): 5

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeRF Module
Operating Frequency (MHz)433
Rated Voltage (VDC)5
Operating Frequency (Hz)433.92MHz; 315Mhz
Max. Operating Current (A)20 - 28 mA
Transmission Distance> 500 m
Output Power (W)16dBm (40mW)
Transfer rate<10Kbps
Dimensions (L x W x H) mm19 x 19 x 8 (L x W x H), 30 x 14 x 9 (L x W x H)
Receiver frequency433.92MHZ; 315 Mhz
Sensitivity (dBm)-105DB
External Antenna32CM signal wire,spiral
Shipping Weight0.06 kg
Shipping Dimensions5 × 5 × 3 cm

Overview

The FS1000A 433mHz Tx & Rx RF Radio Module is listed in our ir and rf transmitters and receivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: RF Module
  • Operating Frequency (MHz): 433 (make sure the rest of your system works at this frequency)
  • Rated Voltage (VDC): 5 (match this to your power supply; too high a voltage can damage the part)
  • Operating Frequency (Hz): 433.92MHz; 315Mhz (make sure the rest of your system works at this frequency)
  • Max. Operating Current (A): 20 - 28 mA (your supply must deliver at least this much current)
  • Transmission Distance: > 500 m
  • Output Power (W): 16dBm (40mW)
  • Transfer rate: <10Kbps

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is FS1000A 433mHz Tx & Rx RF Radio Module. This RF module comprises an RF Transmitter and an RF Receiver. The transmitter/receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. The transmission occurs at the rate of 1Kbps - 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter. This low-cost RF transmitter can be used to transmit signals up to 100 meters (the antenna design, working environment, and supply voltage will seriously impact the effective distance). It’s good for a short distance, battery power device development. 433 MHz is the operating frequency for transmitter and receiver pair.

Features :

  1. Wide input supply (2.5 V to 12V)
  2. Easy to integrate (V+, GND, and Data)
  3. The device in deep sleep mode when Data pin is grounded
  4. Very small dimension.

Receiver Module specification

FS1000A 433mHz Receiver -Elecvora.in

Operation voltage: DC5V Static Current: 4MA Receiver frequency: 433.92MHZ; 315 Mhz Sensitivity:-105DB Dimension:30*14*9mm External Antenna:32CM signal wire,spiral

Transmitter Module Specification

FS1000A 433mHz Transmitter - Elecvora.in

Operating voltage: 3-12V Operating frequency: 433.92MHz; 315Mhz Standby current: 0mA Operating current :20-28mA Transmission distance:> 500m (open to receiving plate sensitivity at-103dBm distance of more than) Output Power: 16dBm (40mW) Transfer rate: <10Kbps Modulation mode: OOK (Amplitude Modulation) Operating Temperature: -10 ℃ ~ +70 ℃ Size: 19 × 19 × 8mm


Package Includes :

1 x FS1000A 433mHz Transmitter. 1 x FS1000A 433mHz Receiver.

Quick specs

Item Type
RF Module
Operating Frequency (MHz)
433
Rated Voltage (VDC)
5
Operating Frequency (Hz)
433.92MHz; 315Mhz
Max. Operating Current (A)
20 - 28 mA
Transmission Distance
&gt; 500 m
See all specifications