
1 / 8 · Click to enlarge
At a glance
Made by FT857, this test & measuring module is a good fit for makers, students and electronics hobbyists.
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Overview
The FT857 FT897 External S Meter SWR Power Meter Digital Receive Transmit Display Voltage Control Standing Wave Ratio Transmit Power Multi Function, made by FT857, is listed in our test & measuring module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Specifications:
Material: Metal, Plastic
Color: White, Black
Size: Approximately 120 x 90 x 70 mm
Features:
1. Designed exclusively for use with FT-857 and FT-897 models, providing seamless integration and specific compatibility.
2. Offers clear and accurate digital display of automatic level control voltage, modulation level, SWR values, supply voltage, and input signal strength.
3. Equipped with adjustable calibration settings for precise meter readings and enhanced functionality.
4. Compact structure with high performance and stable output, ensuring consistent operational efficiency.
5. Simple and intuitive operation with extended menu customization options to tailor performance to user preferences.
Package Included:
1 x External S Meter SWR Power Meter
Receive Display Settings:
1. Press [FUNC] key to enter the setup menu, enable the extended menu.
2. Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3. Rotate [DIAL] to select an external instrument display:
SIG: the input signal strength display
CTR: Discriminator Center Meter
VLT: battery voltage
N / A: blank
FS: buckle in the instrument 1mA full scale output signal calibration standard external instruments
OFF:Turn off the meter.
4. Press [FUNC] button to save the settings and exit the setup menu.
Emission Display Settings:
1. Press [FUNC] key to enter the setup menu, enable the extended menu.
2. Rotate [SELECT] to call up the setup menu item No-061 [MTR ATX SEL].
3. Rotate [DIAL] to select an external instrument display:
PWR: transmit power display
ALC: Automatic Level Control voltage display
MOD: Modulation Level Display
SWR: SWR display
VLT: Display Supply Voltage
N / A: blank
OFF: Turn off the meter.
Calibration method is as follows:
1. Press [FUNC] key to enter the setup menu, enable the extended menu.
2. Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3. Rotate [DIAL] to select FS.
4. With a small flathead screwdriver to adjust the calibration adjustment hole rear, so the header pointer to full scale.
5. The calibration is complete!
Note:
1. If you can not find the numbers 60, 61 menu, is this two radio hide menu. Long press the F key to open the menu settings,
the 1st menu set to ON, press the F key to open the exit to save the hide menu.
2. Due to the light and screen difference, the item's color may be slightly different from the pictures.
3. Please allow 0.5-2 cm differences due to manual measurement.








Cheaper Alternatives

Geekcreit? ESP32 ESP32S 18650 Battery Charge Shield V3 Micro USB Type-A USB 0.5A
3Pcs Geekcreit® 0.28 Inch Yellow LED 2.6V-30V Mini Digital Volt Meter Voltage Tester Two Line Voltmeter

0.56" Blue Red Dual LED Display Mini Digital Voltmeter Ammeter DC 100V 100A Panel Amp Volt Voltage Current Meter Tester
Upgrade Options

LCD GNSS Disciplined Oscillator GPS BDS GLONASS GALILEO High Precision Timing Device OCXO Alternative Square Sine Wave
ESP138D ESP32 H-RADIO SI4732 Full Band FM AM SSB AIR Band Receiver + TEF6686 FM Receiver 2 in 1 Handheld Radio with Bluetooth
MX-S3 SDR Radio Transceiver Switcher/Auxiliary Receiver Compatible with IC7100 FT-891 450D 991A








