At a glance
Made by FY6900, this tools, industrial & scientific is a good fit for DIY builders and repair work. Main specs: model FY6900-20M; sine 0~20MHz; square 0~15MHz. Check that your power source supplies 1Vpp~20Vpp before connecting it.
Key Highlights
- Model: FY6900-20M
- Sine: 0~20MHz
- Square: 0~15MHz
Ideal For
- Repairs around the home
- Electronics bench work
- Workshop jobs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model | FY6900-20M |
|---|---|
| Sine | 0~20MHz |
| Square | 0~15MHz |
| Ramp, Triangle | 0~10MHz |
| Pulse | 0~10MHz |
| TTL/CMOS | 0~10MHz |
| Arbitrary Waveform | 0~10MHz |
| Min pulse width | 20ns(All models of pulse wave min width can be 20ns) |
| Min. Resolution on all frequency range | 1μHz (Min. resolution can low to 1μHz on all frequency range to ensure adjusting accuracy under high frequency. For example, it can output 10.000000000001MHz signal). |
| Accuracy | ±20ppm |
| Stability | ±1ppm/ 3hours |
| Waveforms | Sine, Square, Rectangle (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform. |
| Non-Volatile Storage | Can store 64 user-defined arbitrary waveforms, (8K 14bits) * 64 |
| Waveform Length | 8192 points * 14bits |
| Sampling Rate | 250MSa/s |
| Vertical Resolution | 14 bits |
| Sine | Harmonic Suppression |
| Total Harmonic Distortion | <0.5% (20Hz~20kHz,0dBm) |
| Rectangle | Rise/Fall Time |
| Overshoot | ≤5% |
| Duty Cycle | 0.01%~99.99% (Resolution 0.01%) |
| Sawtooth wave | Linearity |
| Amplitude(VPP) | Frequency≤5MHz: 1mVpp~24Vpp; 5MHz 10MHz Frequency>20MHz: 1mVpp~5Vpp; |
| Resolution | 1mV |
| Amplitude Stability | ±0.5%/ 5 Hours |
| Amplitude flatness | ±2.5%(<10MHz);±5%(>10MHz); |
| Impedance | 50Ω±10%(Typical) |
| Protection | All channels can work more than 60 seconds when the load is short-circuited. |
| Offsets Range | Frequency≤20MHz: ±12V; Frequency>20MHz: ±2.5V; |
| Offsets Resolution | 1mV |
| Phase range | 0~359.99° |
| Phase resolution | 0.01° |
| TTL Level Amplitude | >3Vpp |
| Fan-out | >8 TTL LOAD |
| Rise/Fall Time | ≤10ns |
| Low Electric Level | <0.3V |
| High Electric Level | 1V~12V |
| Rise/Fall Time | ≤18ns |
| Function | Frequency, Period, Positive/Negative Pulse Width, Duty Cycle |
| Input Voltage Range | 1Vpp~20Vpp |
| Frequency Meter | Resolution |
| Range | 0.01Hz~100MHz |
| Sensitivity | Gate Time 3 grades (1S, 10S, 100S) adjustable |
| Counter | Range |
| Coupling | DC, AC |
| Working Mode | Manual |
| Period | Measurement Range |
| Pulse Width | Measurement Range |
| Resolution | 5ns |
| Duty Cycle | Range (Display) |
| Carrier Waveform | Sine, Square, Ramp, Arbitrary (except DC) |
| Sweep Type | Linear or Logarithm |
| Sweep Direction | Up, Down and roundtrip sweep directions; |
| Sweep Objects | Frequency, Amplitude, Offsets, Duty Cycle |
| Sweep Time | 0.01S~999.99S/Step |
| Setting range | Starting position and Finishing position can be set arbitrarily. |
| Sweep Range | Decided by Parameters setting. |
| Modulation signal range to input | 0~5V |
| VCO signal frequency range | 0-2000Hz |
| VCO control object | voltage controlling frequency (VCF), voltage controlling amplitude , voltage controlling offsets, voltage controlling duty cycle. |
| VCO special function | Can Amplitude Modulate (AM) or Frequency Modulate (FM) by external analog signal. |
| Modulation Type | AM, FM, PM, ASK, FSK, PSK |
| Carrier Waveform | Sine, Square, Triangle, Ramp, Arbitrary waveform (Except DC) |
| Source | Internal (CH2) / External (VCO IN Port) |
| Modulating Waveform | Sine, Square, Triangle, Ramp, Arbitrary waveform |
| Depth | 0% to 120% |
| Modulating Frequency | Internal : 1μHz~1MHz; External: 1μHz~2KHz; |
| Source | Internal (CH2) / External (VCO IN Port) |
| Modulating Waveform | Sine, Square, Triangle, Ramp, Arbitrary waveform |
| Modulating Frequency | Internal : 1μHz~1MHz; External: 1μHz~2KHz; |
| Source | Internal (CH2) / External (VCO IN Port) |
| Modulating Waveform | Sine, Square, Triangle, Ramp, Arbitrary waveform |
| Phase Deviation | 0° to 360° |
| Modulating Frequency | Internal : 1μHz~1MHz; External: 1μHz~2KHz; |
| Source | Internal (CH2), External (ASK IN Port), Manual |
| Modulating Waveform | Square with 50% duty cycle. |
| Key Frequency | 1μHz~10MHz |
| Source | Internal (CH2), External (FSK IN Port), Manual |
| Modulating Waveform | Square with 50% duty cycle. |
| Key Frequency | 1μHz~10MHz |
| Source | Internal (CH2), External (PSK IN Port), Manual |
| Modulating Waveform | Square with 50% duty cycle. |
| Key Frequency | 1μHz~10MHz |
| Carrier Waveform | Sine, Square, Ramp, Arbitrary (except DC) |
| Burst Count | 1~1048575 |
| Trigger Source | Manual, Internal, External (AC/DC) |
| Display | Type |
| Save & Load | Amount |
| Position | 01 to 20 (01 for start default value) |
| Interface | Type |
| Protocol | C'ommand line mode, providing communication protocols. |
| Communicating Speed | 9600bps (Industrial standard) |
| Power | Voltage Range |
| Technic | SMD, LSI, Reliable and durable |
| Buzzer | Can be turned on/off by setting. |
| Operation | Buttons and knob continuously. |
| Environment | Temp.: 0~40℃, Humidity:<80% |
| Size | 200mm * 190mm * 90mm (L * W * H) |
| Weight | 850g |
| Package Size | 25cm * 21cm * 10cm (L * W * H) |
| Package Weight | 0.98kg(Main engine, accessories and packing materials) |
| Model number | FY6900-20M |
Overview
The FY6900 Dual Channel DDS Function Arbitrary Waveform Signal Generator Pulse Signal Source Frequency Counter Fully Numerical Control 20MHZ/30MHZ/50MHZ/60MHZ, made by FY6900, is listed in our tools, industrial & scientific range and suits DIY builders and repair work. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model: FY6900-20M
- Sine: 0~20MHz (make sure the rest of your system works at this frequency)
- Square: 0~15MHz (make sure the rest of your system works at this frequency)
- Ramp, Triangle: 0~10MHz (your supply must deliver at least this much current)
- Pulse: 0~10MHz (make sure the rest of your system works at this frequency)
- TTL/CMOS: 0~10MHz (make sure the rest of your system works at this frequency)
- Arbitrary Waveform: 0~10MHz (make sure the rest of your system works at this frequency)
- Min pulse width: 20ns(All models of pulse wave min width can be 20ns) (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
>Sine
>Square
>Rectangle
>Triangle/Ramp
>Rise Sawtooth
>Fall Sawtooth
>Lorenz Pulse
>Multitone
>Noise
>Electrocardiogram (ECG)
>Trapezoidal Pulse
>Sinc Pulse
>Narrow Pulse
>Gauss White Noise
>Step Triangle
>Positive Step
>Inverse Step
>Positive Exponent
>Inverse Exponent
>Positive Falling Exponent
>Inverse Falling Exponent
>Positive Logarithm
>Inverse Logarithm
>Positive Falling Logarithm
>Inverse Falling Logarithm
>Linear FM
>AM
>FM
>Positive Half Wave
>Negative Half Wave
>Positive Half Wave Rectification
>Negative Half Wave Rectification
>User-defined waveform
Technical Specification:
Note: FY6900 supports English & Chinese menu switch. The defaul language is English.
Package Includes:
Details Pictures:








Quick specs
- Model
- FY6900-20M
- Sine
- 0~20MHz
- Square
- 0~15MHz
- Ramp, Triangle
- 0~10MHz
- Pulse
- 0~10MHz
- TTL/CMOS
- 0~10MHz










