
1 / 6 · Click to enlarge
At a glance
Made by Geekcreit, this test & measuring module is a good fit for makers, students and electronics hobbyists. Main specs: measuring range Two-wire DC2.50~32.0V; power supply range No need to supply power separately.The measured voltage <40V, higher than 40V may be damaged.; test accuracy ±1%. >10V error ±0.1V; <10V ±0.03V.
Key Highlights
- Adjustable settings
- Measuring range: Two-wire DC2.50~32.0V
- Power supply range: No need to supply power separately.The measured voltage <40V, higher than 40V may be damaged.
- Test accuracy: ±1%. >10V error ±0.1V; <10V ±0.03V
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Measuring range | Two-wire DC2.50~32.0V |
|---|---|
| Power supply range | No need to supply power separately.The measured voltage <40V, higher than 40V may be damaged. |
| Test accuracy | ±1%. >10V error ±0.1V; <10V ±0.03V |
| Input resistance | >50KΩ |
| Working current | <30mA |
| Refresh rate | About 100mS once |
| Lead length | Default 20cm |
| Dimensions | 30 x 11.5 x 9 mm |
| Hole Size | Pitch: 26mm Aperture: 2.4mm |
| Net weight | 4g |
| Operating temperature | -10 to +80 °C |
| Working humidity | 10 to 80% |
| Working pressure | 80 to 106 kPa |
Overview
The 5pcs 0.28 Inch Two-wire 2.5-30V Digital Red Display DC Voltmeter Adjustable Voltage Meter, made by Geekcreit, is listed in our test & measuring module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Measuring range: Two-wire DC2.50~32.0V (quoted range is usually line-of-sight; walls and interference shorten it)
- Power supply range: No need to supply power separately.The measured voltage <40V, higher than 40V may be damaged. (quoted range is usually line-of-sight; walls and interference shorten it)
- Test accuracy: ±1%. >10V error ±0.1V; <10V ±0.03V
- Input resistance: >50KΩ
- Working current: <30mA (your supply must deliver at least this much current)
- Refresh rate: About 100mS once
- Lead length: Default 20cm (measure your mounting space before ordering)
- Dimensions: 30 x 11.5 x 9 mm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
5 x Voltage meter






Quick specs
- Measuring range
- Two-wire DC2.50~32.0V
- Power supply range
- No need to supply power separately.The measured voltage <40V, higher than 40V may be damaged.
- Test accuracy
- ±1%. >10V error ±0.1V; <10V ±0.03V
- Input resistance
- >50KΩ
- Working current
- <30mA
- Refresh rate
- About 100mS once
Cheaper Alternatives
Upgrade Options

LCD GNSS Disciplined Oscillator GPS BDS GLONASS GALILEO High Precision Timing Device OCXO Alternative Square Sine Wave
ESP138D ESP32 H-RADIO SI4732 Full Band FM AM SSB AIR Band Receiver + TEF6686 FM Receiver 2 in 1 Handheld Radio with Bluetooth
MX-S3 SDR Radio Transceiver Switcher/Auxiliary Receiver Compatible with IC7100 FT-891 450D 991A











