Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A horizontal quick release clamp with a 90 kg holding force and lever-operated skewer for fast clamping and release. The 60° handle and 85° bar opening make it easy to position around workpieces on benches and fixtures.

Key Highlights

  • Nominal holding force of 90 kg / 198 lbs for firm work holding
  • Quick release skewer mechanism for fast clamping and unclamping
  • 60° handle open angle and 85° bar opening for clearance
  • Metal, plastic and rubber pad construction with vinyl handle
  • Oil and dirt resistant red vinyl grip for comfortable operation
  • Lever control helps limit side thrust during clamping

Ideal For

  • Woodworkers holding parts on a bench during assembly
  • Metalworking and fabrication jobs needing fast release
  • Workshop users building repeatable jigs and fixtures
  • Hobbyists and makers who clamp and unclamp frequently
  • Anyone needing a compact horizontal hold-down clamp

Buying Tip

Check the 0.5 cm / 0.196 in mounting hole and the 85° bar opening against your fixture before buying, since these determine whether the clamp fits your bench or jig.

Elecvora expert review

Our verdict

The GH-201B is a practical quick release clamp for bench and fixture work where speed matters more than fine screw adjustment. Its 90 kg rating and wide bar opening cover most light to medium workshop holding tasks.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Fast lever-operated clamping and release
  • 90 kg / 198 lbs nominal holding force
  • 85° bar opening helps clear thicker parts
  • Oil and dirt resistant vinyl handle
  • Rubber pad protects the contact area

Cons

  • No fine threaded adjustment for precise pressure
  • Holding force depends on the mounting and surface
  • Only one clamp is supplied per pack

Best for

Bench and fixture holding in woodworking, metalworking and general workshop tasks

Not ideal for

Applications needing measured, screw-type clamping pressure

Specifications

Item TypeClamps
Model SeriesGH-201B
Handle open angle60 °
Additional Specs.Bar opens angle: 85 °
Nominal Capacity (mAh)90Kg / 198lbs
Materialmetal, plastic, rubber pad
Hole diameter(mm)0.5 cm / 0.196 "
Shipping Weight0.128 kg
Shipping Dimensions14 × 10 × 4 cm

What's in the box

  • 1 x GH-201B Horizontal Clamp

Frequently Asked Questions

What does the 90 kg capacity mean?
It is the nominal holding force the clamp is rated for, expressed as 90 kg / 198 lbs. It is not the weight of the clamp itself.
Do I need power or batteries for this clamp?
No. The GH-201B is a manual lever-operated clamp and requires no power source.
How much does the clamp open?
The handle opens to 60° and the bar opens to 85°, which sets how far the clamp opens for positioning around a workpiece.
What size hole does it use for mounting?
The hole diameter is 0.5 cm / 0.196 in, so match your fixing point to that size if you plan to mount the clamp.
What is included in the package?
The package contains one GH-201B Horizontal Clamp. Fixings and workpieces are not included.
How should I look after the clamp?
Wipe the metal parts and rubber pad clean after use and keep the lever mechanism free of grit. The vinyl handle is designed to resist oil and dirt.

Overview

The GH-201B Horizontal Clamps are a quick release holding tool for workshop tasks where parts need to stay put while you work on them. The horizontal layout places the clamp body alongside the workpiece, so the handle sits out of the way of drills, saws and hand tools. A lever-driven skewer mechanism lets you clamp and release in one motion instead of winding a screw thread, which speeds up repetitive jobs.

The clamp carries a nominal capacity of 90 kg (198 lbs). That figure describes the holding force the clamp is rated for, not the weight of the tool itself, so it is a useful guide when deciding whether the clamp suits a given fixture or assembly job.

Key Features

  • Quick release skewer: the lever controls the skewer so parts can be clamped and freed without slow threaded adjustment.
  • Horizontal orientation: keeps the handle clear of the working area for better access to the joint or cut.
  • Side thrust control: the lever is controlled during clamping to reduce the effect of side thrust on operation.
  • Rubber pads: the contact faces use a rubber pad to sit against the workpiece.
  • Vinyl handle: the red plastic-covered handle is designed to resist oil and dirt and to stay comfortable in use.
  • Assembled hold-down design: the page assembly and U-shaped terminal strip support stable holding.

Specifications Explained

Holding force

The 90 kg / 198 lbs nominal capacity is the headline number. Treat it as the clamp's rated holding force for suitable fixtures and surfaces, and match it to the load you expect the workpiece to carry.

Handle and bar angles

The handle opens to 60°, while the bar opens to 85°. Together these angles describe how far the clamp opens for positioning and how much lever travel you get when tightening. More bar opening means easier placement over thicker parts or awkward shapes.

Materials and mounting

The body mixes metal and plastic with a rubber pad at the contact point. The hole diameter is 0.5 cm / 0.196 in, which is the size to check when planning a fixed mounting point for the clamp.

Compatibility and Requirements

The GH-201B is a manual clamp and needs no power supply. Plan for a mounting point that matches the 0.5 cm / 0.196 in hole if you intend to fix it to a bench or fixture. Because the clamp uses a rubber pad, it is suited to workpieces that can tolerate pad contact rather than sharp finished surfaces.

Typical Uses

  • Holding parts on a bench during drilling, cutting or assembly
  • Woodworking and metalworking fixtures that need fast release
  • Temporary holding during transport or positioning of components
  • Repeat jobs where screw clamps would slow the workflow

What's in the Box

One GH-201B Horizontal Clamp is supplied. Mounting hardware and workpieces are not included.

Quick specs

Item Type
Clamps
Model Series
GH-201B
Handle open angle
60 °
Additional Specs.
Bar opens angle: 85 °
Nominal Capacity (mAh)
90Kg / 198lbs
Material
metal, plastic, rubber pad
See all specifications