
1 / 3 · Click to enlarge
AI Summary
A compact GNSS breakout board that receives L1 and L5 signals for GPS, NavIC, GAGAN and GLONASS positioning. It runs from a 5V supply and offers optional provisions for IMU-based dead reckoning and an RTK module.
Key Highlights
- L1 and L5 signal reception for GPS and NavIC
- Works with NavIC, GAGAN, GLONASS and GPS satellites
- About 1 second hot start and under 30 seconds cold start
- Runs from external 5V plus or minus 5 percent at 120mA or less
- Optional IMU and RTK provisions for dead reckoning or precision work
- Compact 54 x 49mm PCB with matched antenna layout
Ideal For
- Drone and FPV builders adding GPS positioning
- Robotics and rover developers needing compact GNSS
- Students and researchers working with NavIC and multi-constellation reception
- Makers prototyping dead reckoning or RTK upgrades
- Projects requiring a 5V low-current navigation receiver
Buying Tip
Confirm your build can supply a stable regulated 5V at up to 120mA, and plan your antenna choice before ordering since external antennas may need matching.
Elecvora expert review
Our verdict
A well-considered breakout that combines dual-band L1 and L5 reception with sensible expansion options for dead reckoning and RTK. It is a practical choice for builders who want one board that can grow with their project.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- L1 and L5 reception across GPS, NavIC, GAGAN and GLONASS
- Low 5V power draw under 120mA
- Fast hot start of about 1 second
- Provisions for IMU and RTK expansion
Cons
- RTC battery is not populated
- Antennas and optional modules are not included
- Some advanced features require datasheet confirmation
Best for
Drone, robotics and research projects needing flexible multi-constellation positioning
Not ideal for
Users wanting a fully assembled, plug-and-play navigation unit with antenna included
Specifications
| Length (mm) | 59 |
|---|---|
| Width (mm) | 54 |
| Weight (g) | 10 |
| Start-up Time | ~1sec hot start and ≤30sec cold start |
| Input Voltage (V) | 5 |
| Input current | ≤120mA |
| Power Consumption (W) | ≤0.6W |
| PCB Size ( L x W ) mm | 54 x 49mm |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 17 × 10 × 2 cm |
What's in the box
- 1 x GNSS Receiver BOB with IRNSS
Frequently Asked Questions
Which satellite systems does this board support?
What power supply does it need?
Is an antenna included?
Does it support RTK out of the box?
How fast does it get a position fix?
Is the RTC battery included?
Overview
The GNSS Receiver BOB with IRNSS is a satellite navigation receiver breakout board for builders who need reliable positioning in a small, integration-friendly format. It receives L1 and L5 signals, allowing it to work with GPS, NavIC, GAGAN and GLONASS satellites and deliver 3D navigation data. A SkyTraQ chipset is paired with a carefully designed board-level RF layout and matched antenna arrangement, which helps the receiver acquire and track satellites even when signals are weak.
The board is powered from an external 5V supply with a tolerance of plus or minus 5 percent and draws no more than 120mA, keeping power consumption at or below 0.6W. That makes it practical for small airborne platforms and battery-powered projects where every milliampere matters.
Key Features
- Dual-band reception: L1 and L5 support covers GPS and NavIC signals alongside GAGAN and GLONASS.
- Fast startup: roughly 1 second hot start and 30 seconds or less cold start.
- Flexible antenna options: the RF layout supports on-board or external antennas, with an antenna matching option for external units.
- Expandable architecture: provisions for IMU sensors and an optional RTK module let the same board serve several roles.
- Dead reckoning ready: supports Automotive Dead Reckoning and Odometer-less Dead Reckoning using built-in or external sensors.
- AGPS support to assist satellite acquisition.
Specifications Explained
The 54 x 49mm PCB and 10g weight keep the module light enough for small frames, while the 59 x 54mm overall dimensions describe the board outline including its mounting area. A 5V input at 120mA or less suits regulated supplies and typical flight electronics rails. Startup figures tell you what to expect: a hot start near 1 second when the receiver has recent almanac data, and a cold start of about 30 seconds when it does not. Position accuracy is around 2.5m CEP under normal conditions. A provision for an RTC battery (MS621FE-FL11E, not populated) allows you to add backup power for faster subsequent starts.
Compatibility and Requirements
The board requires an external 5V plus or minus 5 percent DC supply capable of at least 120mA. It works with NavIC, GAGAN, GLONASS and GPS satellites. An on-board or external antenna can be used, and external antennas can be matched through the antenna matching option. The optional IMU and RTK module are provisions rather than included parts, so check the datasheet before planning those features. The RTC battery is not populated.
Typical Uses
Drone and FPV builders can use the board for position logging and navigation, while robotics and rover projects benefit from its compact footprint and dead reckoning provisions. Students and developers working with NavIC or multi-constellation reception will find the breakout format convenient for prototyping, and projects that later need higher precision can add the optional RTK module.
What's in the Box
Package includes 1 x GNSS Receiver BOB with IRNSS. Antennas, IMU sensors, RTK modules and the RTC battery are not included unless separately supplied.
Quick specs
- Length (mm)
- 59
- Width (mm)
- 54
- Weight (g)
- 10
- Start-up Time
- ~1sec hot start and ≤30sec cold start
- Input Voltage (V)
- 5
- Input current
- ≤120mA













