Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 450W digital hot air rework station with microcomputer temperature control from 100°C to 450°C and adjustable linear airflow. Its inductive handle switch activates the unit on pickup and returns it to standby when set down.

Key Highlights

  • 450W rated power for fast hot air heating
  • Microcomputer control with sensor closed-loop stability
  • Adjustable temperature range of 100°C to 450°C
  • Linear airflow adjustment for soft to strong output
  • Inductive handle switch with automatic standby
  • Brushless fan for quieter operation

Ideal For

  • Repair technicians doing SMD component replacement
  • Electronics hobbyists and makers working on PCBs
  • Bench technicians who need adjustable hot air flow
  • Learners moving from contact soldering to hot air rework

Buying Tip

Check that your mains supply matches the 220 VDC rating before ordering, and keep the handle on its stand so the inductive standby switch works as intended.

Elecvora expert review

Our verdict

The 958D packs sensible rework features into a compact bench footprint: closed-loop temperature control, progressive airflow and an automatic standby switch are the details that matter day to day. It is a practical entry point into hot air work rather than a specialist production tool.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Closed-loop temperature control keeps the set point stable as airflow changes
  • Linear airflow adjustment is easy to control near small components
  • Inductive handle switch reduces unnecessary heating and power use
  • Compact 200 x 190 mm body with a brushless fan for quieter running

Cons

  • Rated for 220 VDC supply, so verify your mains before use
  • No temperature readout details or nozzle sizes are specified in the supplied data
  • Hot air rework requires practice to avoid damaging nearby components

Best for

Bench repair and SMD rework at a hobbyist and small-shop level

Not ideal for

Production lines needing documented calibration or multi-tool stations

Specifications

Item TypeRework Station
Model No. / Name958D
Rated Voltage (VDC)220
Power Rating450W
Temperature Control (°C)100-450
Working Voltage24V
Length (mm)200
Width (mm)190
Weight (g)1460
Shipping Weight1.84 kg
Shipping Dimensions21 × 22 × 18 cm

What's in the box

  • 1 x GORDAK 958D Digital Rework Station
  • 1 x Hot air gun handle
  • 1 x Hot air gun handle stand
  • 1 x Power cord
  • 3 x Nozzle
  • 1 x Maintenance card
  • 1 x Manual

Frequently Asked Questions

What temperature range does the GORDAK 958D support?
It can be set from 100°C to 450°C, with microcomputer control and sensor closed-loop feedback maintaining the chosen temperature.
What supply voltage does it need?
The station is rated for 220 VDC. Confirm your mains supply matches this before connecting the unit.
How does the handle switch work?
An inductive switch in the handle activates the station when the handle is picked up and puts it into standby when the handle is returned to the stand.
What nozzles are included?
Three nozzles are supplied in the box, along with the hot air gun handle, handle stand, power cord, maintenance card and manual.
Does the fan make much noise?
The station uses a brushless fan, which is intended to keep operating noise lower during use.
How should I store it after use?
Let the intelligent cooling routine bring the temperature down at 100°C, switch off, and rest the handle on its stand.

Overview

The GORDAK 958D is a digital rework station for hot air soldering tasks, combining a 450W heating system with microcomputer control and sensor closed-loop feedback. That combination is what keeps the nozzle temperature steady at your chosen setting rather than drifting as airflow changes. The working voltage of 24V feeds the handle, and the temperature can be set anywhere from 100°C to 450°C.

Physically it is a compact bench unit at roughly 200 mm long and 190 mm wide, weighing about 1.46 kg, so it occupies limited bench space while staying stable in use. A brushless fan handles the airflow, which keeps running noise down during long sessions.

Key Features

  • Microcomputer temperature control: sensor closed-loop regulation holds the set point accurately across the airflow range.
  • Linear airflow adjustment: a soft, controllable stream that can be increased for larger joints or heavier boards.
  • Inductive handle switch: the station activates when the handle is lifted and enters standby when it is placed back on the stand.
  • Intelligent cooling: the cooling routine engages at 100°C to help extend heating element life.
  • Wide temperature window: 100°C to 450°C covers low-temperature work through to demanding rework.

Specifications Explained

450W power rating describes the station's heating capacity; higher power generally means quicker recovery when air flows across the element. 24V working voltage is the voltage delivered to the hot air handle, while the station itself is rated for 220 VDC input. 100-450°C range gives you headroom for heat-sensitive parts at the low end and stubborn solder at the high end. Linear airflow means the adjustment responds progressively rather than in steps, which helps when working near small components.

Compatibility and Requirements

The station is rated for a 220 VDC supply, so confirm your mains supply matches before use. Nozzles and the hot air handle supplied are part of the 958D system; no other accessory compatibility is specified by the manufacturer.

Typical Uses

Hot air rework suits SMD component removal and replacement, shrinking heat-shrink tubing, and general board repair where a directed stream of heated air is more appropriate than a contact iron. The adjustable airflow and broad temperature range make it usable for both small two-terminal parts and larger packages.

What's in the Box

  • 1 x GORDAK 958D Digital Rework Station
  • 1 x Hot air gun handle
  • 1 x Hot air gun handle stand
  • 1 x Power cord
  • 3 x Nozzle
  • 1 x Maintenance card
  • 1 x Manual

Quick specs

Item Type
Rework Station
Model No. / Name
958D
Rated Voltage (VDC)
220
Power Rating
450W
Temperature Control (°C)
100-450
Working Voltage
24V
See all specifications