
1 / 5 · Click to enlarge
AI Summary
A compact GPS NEO-7M development board that outputs NMEA data over TTL serial for Arduino, STM32 and 51 projects. It includes an onboard ceramic antenna, SMA connector for an external antenna, micro USB debugging and non-volatile settings storage.
Key Highlights
- NEO-7M GPS receiver outputs standard NMEA protocol
- Onboard ceramic antenna for satellite lock in open areas
- SMA connector supports an external antenna for better reception
- Micro USB port for direct debugging and configuration
- Reserved TTL serial header for MCU or USB-serial connection
- Built-in FLASH retains settings after power-off
Ideal For
- Arduino makers adding GPS to projects
- STM32 and 8051 developers needing NMEA data
- Students learning about satellite positioning
- Engineers prototyping location-aware devices
- Drone and robotics hobbyists building navigation systems
Buying Tip
Check that your microcontroller’s serial pins are TTL-level (3.3 V or 5 V) and remember to order a micro USB data cable if you plan to debug via the USB port.
Elecvora expert review
Our verdict
This NEO-7M module offers a practical way to add GPS to microcontroller projects with minimal wiring. The combination of onboard antenna, SMA option and USB debugging makes it flexible for both beginners and experienced developers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard NMEA output works with many libraries
- Onboard ceramic antenna simplifies initial testing
- SMA connector allows external antenna upgrade
- Micro USB port enables direct computer debugging
- Settings persist after power-off thanks to built-in FLASH
Cons
- Requires a separate microcontroller or USB-serial adapter for serial data
- Micro USB cable not included
- First fix may take several minutes in open sky
Best for
Makers and engineers adding GPS to Arduino, STM32 or 51 projects
Not ideal for
Users expecting a complete GPS tracker with display and battery
Specifications
| Item Type | Satellite GPS Module |
|---|---|
| Model No. / Name | GPS NEO-7M |
| Map Type | Satellite |
| Weight (g) | 531 g |
| Recommended Power Supply | 3.3~5 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 6 × 4 × 3 cm |
What's in the box
- 1 x GPS NEO-7M Satellite Positioning Module Development Board
Frequently Asked Questions
What is the power supply requirement for this module?
Can I connect this module directly to my Arduino?
Do I need an external antenna?
What is included in the package?
How do I configure the module?
What is the PPS pin used for?
Overview
The GPS NEO-7M Satellite Positioning Module Development Board is a ready-to-use GNSS receiver board designed for integration with popular microcontroller platforms such as Arduino, STM32 and 8051. Based on the NEO-7M chipset, it provides satellite positioning data in the standard NMEA protocol format, which is widely supported by libraries and development tools. Whether you are building a tracker, a timing device or a navigation aid, this module gives you a straightforward serial interface to work with.
Key Features
- NEO-7M receiver: Delivers reliable satellite positioning data using the NMEA standard.
- Onboard ceramic antenna: Enables satellite acquisition in open outdoor areas without an external antenna.
- SMA antenna connector: Lets you attach an external antenna when you need stronger reception or a remote antenna location.
- Micro USB interface: Allows direct connection to a computer for debugging and monitoring GPS output.
- Reserved serial header: Provides TTL-level TXD and RXD pins for connection to a microcontroller or a USB-to-serial adapter.
- Built-in FLASH: Saves configuration settings after power-off, so no external EEPROM is required.
- Signal indicator: Shows when the module is receiving satellite information.
Specifications Explained
Power supply: The module accepts a recommended supply of 3.3 V to 5 V, making it compatible with both 3.3 V and 5 V logic systems. Always ensure your power source can provide a stable voltage within this range.
Serial interface: The TXD and RXD pins are TTL-level and should not be connected directly to RS232-level devices. TXD transmits data from the module and connects to the RXD of your microcontroller; RXD receives data and connects to the TXD of your microcontroller. The PPS pin provides a clock pulse output, which can be useful for precise timing applications.
Antenna options: The onboard ceramic antenna is sufficient for many open-sky applications. For environments with weak signals or when the module must be enclosed, the SMA connector allows you to use an external antenna for improved positioning ability.
Physical details: The module has a shipping weight of 0.05 kg and shipping dimensions of 6 × 4 × 3 cm, making it compact and easy to fit into small projects.
Compatibility and Requirements
The module is designed for use with Arduino, STM32 and 51 series microcontrollers, as well as any device that can communicate over TTL serial. To receive GPS data, you will need a microcontroller or a USB-to-serial adapter. For debugging via the micro USB port, a standard micro USB data cable is required (not included). An external antenna is optional and connects via the SMA port. The module requires a power supply within the recommended 3.3–5 V range.
Typical Uses
- Adding GPS positioning to Arduino, STM32 or 51 projects
- Building location trackers and data loggers
- Learning about NMEA protocol and satellite navigation
- Timing applications using the PPS output
- Prototyping navigation systems for drones or robotics
What's in the Box
- 1 x GPS NEO-7M Satellite Positioning Module Development Board
Quick specs
- Item Type
- Satellite GPS Module
- Model No. / Name
- GPS NEO-7M
- Map Type
- Satellite
- Weight (g)
- 531 g
- Recommended Power Supply
- 3.3~5
- Shipping Weight
- 0.05 kg













