
1 / 2 · Click to enlarge
At a glance
This inductive proximity sensor is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Proximity Sensor; detection distance (mm) 5; current consumption 5. Check that your power source supplies 10 to 30 before connecting it.
Key Highlights
- Model No. / Name: Proximity Sensor
- Detection Distance (mm): 5
- Current consumption: 5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Proximity Sensor |
|---|---|
| Detection Distance (mm) | 5 |
| Operating Voltage (VDC) | 10 to 30 |
| Current consumption | 5 |
| Cable Length | 150 |
| Frequency Response | 500Hz Max |
| Protection Class | IP 67 |
| Shipping Weight | 0.044 kg |
| Shipping Dimensions | 10 × 7 × 1 cm |
Overview
The Green SN04-P PNP DC10–30V Inductive Proximity Switch is listed in our inductive proximity sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Proximity Sensor
- Detection Distance (mm): 5
- Operating Voltage (VDC): 10 to 30 (match this to your power supply; too high a voltage can damage the part)
- Current consumption: 5 (your supply must deliver at least this much current)
- Cable Length: 150 (measure your mounting space before ordering)
- Frequency Response: 500Hz Max (make sure the rest of your system works at this frequency)
- Protection Class: IP 67
- Shipping Weight: 0.044 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
- Brown wire: 10 ~ 30 VDC (+Ve).
- Blue wire: 0 V (GND).
- Black wire: signal.
Features:
- Red LED checks the state of the proximity sensor
- High repeated positioning accuracy
- High switching frequency
- Wide voltage range
- Antivibration, dust, water, and oil prevention
- Reverse power protection, short circuit protection, directly connecting with PLC
- It can replace small switches and limit switches.
Package Includes:
1 x Green SN04-P PNP DC10-30V Inductive Proximity Sensor SwitchQuick specs
- Model No. / Name
- Proximity Sensor
- Detection Distance (mm)
- 5
- Operating Voltage (VDC)
- 10 to 30
- Current consumption
- 5
- Cable Length
- 150
- Frequency Response
- 500Hz Max













